Summary


Boardz1
Testsuitetests_periph_gpio
Status
FAIL
RIOT Version
2022.07-devel-898-gd9fc082686
HIL Tests Version
8fe8d2d38b
Date / Time
28.06.202200:1900:00:34.453
70%

Log


Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:24.081
INFO
Starting process: make reset
00:19:24.091
INFO
Waiting for process to complete.
00:19:25.079
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:25.083
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:25.096
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:25.211
INFO
Starting process: make reset
00:19:25.221
INFO
Waiting for process to complete.
00:19:26.285
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.289
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.305
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.394
INFO
${RESULT} = {'cmd': 'gpio_set 1 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.397
INFO
${RESULT} = {'cmd': 'gpio_set 1 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.515
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.531
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.534
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.578
INFO
${RESULT} = {'cmd': 'gpio_clear 1 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.582
INFO
${RESULT} = {'cmd': 'gpio_clear 1 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.699
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.715
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.718
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:26.777
INFO
Starting process: make reset
00:19:26.787
INFO
Waiting for process to complete.
00:19:27.814
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:27.818
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:27.833
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:27.923
INFO
${RESULT} = {'cmd': 'gpio_set 4 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:27.926
INFO
${RESULT} = {'cmd': 'gpio_set 4 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.043
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.060
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.063
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.106
INFO
${RESULT} = {'cmd': 'gpio_clear 4 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.110
INFO
${RESULT} = {'cmd': 'gpio_clear 4 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.227
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.244
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.248
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:28.325
INFO
Starting process: make reset
00:19:28.335
INFO
Waiting for process to complete.
00:19:29.353
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.357
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.372
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.462
INFO
${RESULT} = {'cmd': 'gpio_set 1 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.465
INFO
${RESULT} = {'cmd': 'gpio_set 1 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.583
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.605
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.610
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.653
INFO
${RESULT} = {'cmd': 'gpio_clear 1 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.656
INFO
${RESULT} = {'cmd': 'gpio_clear 1 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.773
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.788
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:29.792
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:30.154
INFO
Starting process: make reset
00:19:30.164
INFO
Waiting for process to complete.
00:19:31.150
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:31.154
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:31.169
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:31.279
INFO
Starting process: make reset
00:19:31.289
INFO
Waiting for process to complete.
00:19:32.324
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:32.329
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:32.349
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:32.429
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:32.480
INFO
Starting process: make reset
00:19:32.490
INFO
Waiting for process to complete.
00:19:33.480
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:33.484
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:33.499
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:33.567
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:33.617
INFO
Starting process: make reset
00:19:33.627
INFO
Waiting for process to complete.
00:19:34.652
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:34.657
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:34.676
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:34.756
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:34.806
INFO
Starting process: make reset
00:19:34.816
INFO
Waiting for process to complete.
00:19:35.801
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:35.805
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:35.819
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:35.889
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:35.940
INFO
Starting process: make reset
00:19:35.950
INFO
Waiting for process to complete.
00:19:36.974
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:36.979
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:36.999
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.100
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.103
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.137
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.140
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.168
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.171
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.203
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.207
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.239
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.242
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.270
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.273
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.308
INFO
${RESULT} = {'cmd': 'gpio_set 4 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.312
INFO
${RESULT} = {'cmd': 'gpio_set 4 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.429
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.445
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.448
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.490
INFO
${RESULT} = {'cmd': 'gpio_clear 4 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.493
INFO
${RESULT} = {'cmd': 'gpio_clear 4 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.610
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.626
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.629
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Resets the device
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:37.686
INFO
Starting process: make reset
00:19:37.696
INFO
Waiting for process to complete.
00:19:38.682
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.686
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.703
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.789
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.792
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.824
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.827
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.856
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.859
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.892
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.895
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.927
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
00:19:38.931
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:19 / 28.06.2022 - 00:19