Summary


Boardstk3200
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:2100:01:44.237
100%

Log


Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:14.853
INFO
Starting process: make reset
00:21:14.865
INFO
Waiting for process to complete.
00:21:15.935
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:18.940
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:18.969
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:19.139
INFO
Starting process: make reset
00:21:19.152
INFO
Waiting for process to complete.
00:21:20.208
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.212
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.245
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.582
INFO
${RESULT} = {'cmd': 'gpio_set 5 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.586
INFO
${RESULT} = {'cmd': 'gpio_set 5 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.705
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.724
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.728
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.807
INFO
${RESULT} = {'cmd': 'gpio_clear 5 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.810
INFO
${RESULT} = {'cmd': 'gpio_clear 5 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.929
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.946
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:23.950
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:24.013
INFO
Starting process: make reset
00:21:24.024
INFO
Waiting for process to complete.
00:21:25.169
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.174
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.191
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.357
INFO
${RESULT} = {'cmd': 'gpio_set 5 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.360
INFO
${RESULT} = {'cmd': 'gpio_set 5 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.479
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.496
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.500
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.582
INFO
${RESULT} = {'cmd': 'gpio_clear 5 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.586
INFO
${RESULT} = {'cmd': 'gpio_clear 5 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.704
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.761
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.766
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:28.849
INFO
Starting process: make reset
00:21:28.859
INFO
Waiting for process to complete.
00:21:29.934
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:32.939
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:32.971
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.136
INFO
${RESULT} = {'cmd': 'gpio_set 5 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.139
INFO
${RESULT} = {'cmd': 'gpio_set 5 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.258
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.275
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.279
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.360
INFO
${RESULT} = {'cmd': 'gpio_clear 5 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.364
INFO
${RESULT} = {'cmd': 'gpio_clear 5 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.483
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.500
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.504
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:33.858
INFO
Starting process: make reset
00:21:33.869
INFO
Waiting for process to complete.
00:21:34.922
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:37.927
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:37.953
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:38.131
INFO
Starting process: make reset
00:21:38.141
INFO
Waiting for process to complete.
00:21:39.222
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:42.226
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:42.260
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:42.432
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:42.486
INFO
Starting process: make reset
00:21:42.497
INFO
Waiting for process to complete.
00:21:43.571
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:46.575
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:46.610
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:46.754
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:46.810
INFO
Starting process: make reset
00:21:46.821
INFO
Waiting for process to complete.
00:21:47.876
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:50.880
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:50.912
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:51.117
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:51.173
INFO
Starting process: make reset
00:21:51.184
INFO
Waiting for process to complete.
00:21:52.234
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:55.239
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:55.270
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:55.426
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Resets the device
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:55.481
INFO
Starting process: make reset
00:21:55.492
INFO
Waiting for process to complete.
00:21:56.547
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.552
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.585
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.768
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.772
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.809
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.812
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.844
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.847
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.884
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.888
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.925
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.928
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.960
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
00:21:59.963
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
00:22:00.006
INFO
${RESULT} = {'cmd': 'gpio_set 2 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:21 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.009
INFO
${RESULT} = {'cmd': 'gpio_set 2 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.132
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.150
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.153
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.230
INFO
${RESULT} = {'cmd': 'gpio_clear 2 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.233
INFO
${RESULT} = {'cmd': 'gpio_clear 2 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.352
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.370
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.374
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:00.437
INFO
Starting process: make reset
00:22:00.448
INFO
Waiting for process to complete.
00:22:01.504
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.508
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.544
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.767
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.770
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.807
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.811
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.844
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.847
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.884
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.889
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.925
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:04.929
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22