Summary


Boardslstk3401a
Testsuitetests_periph_uart
Status
FAIL
RIOT Version
2022.04-devel-92-g2520b5c608
HIL Tests Version
8fe8d2d38b
Date / Time
22.01.202223:2100:01:59.943
0%

Log


Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests
Documentation: Verify basic functionality of the periph UART API.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/01__periph_uart_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Resets the device
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:48.789
INFO
Starting process: make reset
23:21:48.799
INFO
Waiting for process to complete.
23:21:49.932
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:52.936
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:52.953
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Write short string to UART and verify echo reply.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Resets the device
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:53.136
INFO
Starting process: make reset
23:21:53.148
INFO
Waiting for process to complete.
23:21:54.332
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:57.337
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:57.377
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:57.562
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:21
23:21:57.565
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:22
23:22:01.714
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:21 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:01.722
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:01.769
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write long string to UART and verify echo reply.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:01.839
INFO
Starting process: make reset
23:22:01.849
INFO
Waiting for process to complete.
23:22:02.971
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:05.975
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:06.015
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:06.219
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:06.222
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:10.373
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:10.380
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:10.416
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify echo of short string to UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:10.492
INFO
Starting process: make reset
23:22:10.501
INFO
Waiting for process to complete.
23:22:11.609
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:14.613
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:14.657
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:14.926
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:14.930
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:19.146
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:19.151
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:19.180
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify echo of long string to UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:19.244
INFO
Starting process: make reset
23:22:19.257
INFO
Waiting for process to complete.
23:22:20.396
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:23.401
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:23.440
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:23.568
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:23.571
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:27.713
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:27.720
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:27.758
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify access of user register via UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:27.816
INFO
Starting process: make reset
23:22:27.829
INFO
Waiting for process to complete.
23:22:28.937
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:31.941
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:31.986
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:32.134
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:32.137
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.377
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.385
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.422
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verfiy access of invalid register via UART fails.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.468
INFO
Starting process: make reset
23:22:36.478
INFO
Waiting for process to complete.
23:22:37.593
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:40.598
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:40.639
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:40.771
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:40.774
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:44.923
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:44.928
INFO
${RESULT} = {'cmd': 'uart_init 2 115200', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:44.956
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify UART write with baudrate 9600.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:45.025
INFO
Starting process: make reset
23:22:45.040
INFO
Waiting for process to complete.
23:22:46.145
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:49.151
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:49.190
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:49.338
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:49.340
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:53.587
INFO
${RESULT} = {'cmd': 'uart_init 2 9600', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:53.594
INFO
${RESULT} = {'cmd': 'uart_init 2 9600', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:53.629
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify UART write with baudrate 38400.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:53.692
INFO
Starting process: make reset
23:22:53.702
INFO
Waiting for process to complete.
23:22:54.803
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:57.808
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:57.847
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:57.983
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 422 0 150 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:57.986
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 422 0 150 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
23:23:02.138
INFO
${RESULT} = {'cmd': 'uart_init 2 38400', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:02.145
INFO
${RESULT} = {'cmd': 'uart_init 2 38400', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:02.175
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify UART write fails when baudrates do not match.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Resets the device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:02.248
INFO
Starting process: make reset
23:23:02.258
INFO
Waiting for process to complete.
23:23:03.359
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:06.363
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:06.402
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Setup tester's UART.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:06.546
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:06.548
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:10.694
INFO
${RESULT} = {'cmd': 'uart_init 2 38400', 'data': None, 'result': 'Timeout'}
Documentation: Init UART device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:10.700
INFO
${RESULT} = {'cmd': 'uart_init 2 38400', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:10.727
FAIL
Uart Init expected Success but received Timeout
Documentation: Remove garbage from UART buffer
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify mode config functionality of the periph UART API.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/02__periph_uart_mode.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Resets the device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:11.092
INFO
Starting process: make reset
23:23:11.103
INFO
Waiting for process to complete.
23:23:12.200
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:15.204
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:15.240
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify UART mode with 8 data bits and even parity.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Resets the device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:15.441
INFO
Starting process: make reset
23:23:15.451
INFO
Waiting for process to complete.
23:23:16.595
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:19.600
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:19.637
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify DUT supports UART mode configuration
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:21.845
INFO
${status} = FAIL
23:23:21.846
INFO
${value} = Uart Mode expected Success but received Timeout
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:21.797
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Setup databits, parity and stopbits.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:21.803
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:21.839
FAIL
Uart Mode expected Success but received Timeout
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:21.850
SKIP
UART Mode not supported
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify UART mode with 8 data bits and odd parity.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Resets the device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:21.900
INFO
Starting process: make reset
23:23:21.910
INFO
Waiting for process to complete.
23:23:23.012
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:26.016
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:26.043
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify DUT supports UART mode configuration
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:28.291
INFO
${status} = FAIL
23:23:28.292
INFO
${value} = Uart Mode expected Success but received Timeout
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:28.243
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Setup databits, parity and stopbits.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:28.250
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:28.285
FAIL
Uart Mode expected Success but received Timeout
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:28.299
SKIP
UART Mode not supported
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify UART mode with 7 data bits and even parity.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Resets the device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:28.354
INFO
Starting process: make reset
23:23:28.364
INFO
Waiting for process to complete.
23:23:29.465
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:32.470
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:32.512
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify DUT supports UART mode configuration
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:34.728
INFO
${status} = FAIL
23:23:34.729
INFO
${value} = Uart Mode expected Success but received Timeout
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:34.682
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Setup databits, parity and stopbits.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:34.689
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:34.724
FAIL
Uart Mode expected Success but received Timeout
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:34.733
SKIP
UART Mode not supported
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify UART mode with 7 data bits and odd parity.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Resets the device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:34.800
INFO
Starting process: make reset
23:23:34.814
INFO
Waiting for process to complete.
23:23:35.978
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:38.983
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:39.021
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify DUT supports UART mode configuration
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:41.301
INFO
${status} = FAIL
23:23:41.302
INFO
${value} = Uart Mode expected Success but received Timeout
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:41.237
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Setup databits, parity and stopbits.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:41.244
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:41.290
FAIL
Uart Mode expected Success but received Timeout
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:41.312
SKIP
UART Mode not supported
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify UART mode with 2 stops bits.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Resets the device
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:41.377
INFO
Starting process: make reset
23:23:41.388
INFO
Waiting for process to complete.
23:23:42.513
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:45.518
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:45.548
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Verify DUT supports UART mode configuration
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:47.838
INFO
${status} = FAIL
23:23:47.839
INFO
${value} = Uart Mode expected Success but received Timeout
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:47.789
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Setup databits, parity and stopbits.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:47.796
INFO
${RESULT} = {'cmd': 'uart_mode 2 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:47.832
FAIL
Uart Mode expected Success but received Timeout
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
23:23:47.846
SKIP
UART Mode not supported
Documentation: Setup uart parameters on PHiLIP
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23
Documentation: Configure UART mode and flush
Start / End: 22.01.2022 - 23:23 / 22.01.2022 - 23:23