Summary


Boardslstk3400a
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.04-devel-147-g99d245f538
HIL Tests Version
8fe8d2d38b
Date / Time
26.01.202223:2900:01:45.790
100%

Log


Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:31
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:30
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:29
Documentation: Resets the device
Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:29
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:29
23:29:57.101
INFO
Starting process: make reset
23:29:57.113
INFO
Waiting for process to complete.
23:29:58.238
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:29 / 26.01.2022 - 23:30
23:30:01.242
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:01.256
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:01.481
INFO
Starting process: make reset
23:30:01.492
INFO
Waiting for process to complete.
23:30:02.587
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:05.591
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:05.625
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:05.804
INFO
${RESULT} = {'cmd': 'gpio_set 2 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:05.807
INFO
${RESULT} = {'cmd': 'gpio_set 2 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:05.924
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:05.940
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:05.944
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:06.029
INFO
${RESULT} = {'cmd': 'gpio_clear 2 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:06.033
INFO
${RESULT} = {'cmd': 'gpio_clear 2 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:06.150
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:06.166
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:06.169
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:06.226
INFO
Starting process: make reset
23:30:06.236
INFO
Waiting for process to complete.
23:30:07.437
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.443
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.476
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.689
INFO
${RESULT} = {'cmd': 'gpio_set 2 1', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.693
INFO
${RESULT} = {'cmd': 'gpio_set 2 1', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.810
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.826
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.829
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.915
INFO
${RESULT} = {'cmd': 'gpio_clear 2 1', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:10.918
INFO
${RESULT} = {'cmd': 'gpio_clear 2 1', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:11.035
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:11.052
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:11.056
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:11.122
INFO
Starting process: make reset
23:30:11.143
INFO
Waiting for process to complete.
23:30:12.315
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.319
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.351
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.576
INFO
${RESULT} = {'cmd': 'gpio_set 2 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.580
INFO
${RESULT} = {'cmd': 'gpio_set 2 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.697
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.713
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.716
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.800
INFO
${RESULT} = {'cmd': 'gpio_clear 2 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.804
INFO
${RESULT} = {'cmd': 'gpio_clear 2 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.922
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.937
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:15.940
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify if board to philip wiring is correct.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:31
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:16.301
INFO
Starting process: make reset
23:30:16.310
INFO
Waiting for process to complete.
23:30:17.427
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:20.431
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:20.452
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:20.685
INFO
Starting process: make reset
23:30:20.695
INFO
Waiting for process to complete.
23:30:21.785
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:24.790
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:24.820
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:24.969
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:25.029
INFO
Starting process: make reset
23:30:25.038
INFO
Waiting for process to complete.
23:30:26.129
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:29.134
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:29.162
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:29.293
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:29.344
INFO
Starting process: make reset
23:30:29.354
INFO
Waiting for process to complete.
23:30:30.463
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.468
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.500
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.644
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.648
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.683
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.686
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.714
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.717
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.750
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.754
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.786
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.789
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.817
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.820
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.898
INFO
${RESULT} = {'cmd': 'gpio_set 3 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:33.901
INFO
${RESULT} = {'cmd': 'gpio_set 3 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.018
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.035
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.038
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.121
INFO
${RESULT} = {'cmd': 'gpio_clear 3 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.124
INFO
${RESULT} = {'cmd': 'gpio_clear 3 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.241
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.258
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.263
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:34.322
INFO
Starting process: make reset
23:30:34.331
INFO
Waiting for process to complete.
23:30:35.420
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.425
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.460
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.674
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.677
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.710
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.713
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.743
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.746
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.780
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.784
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.818
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.821
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.850
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.853
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.895
INFO
${RESULT} = {'cmd': 'gpio_set 3 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:38.898
INFO
${RESULT} = {'cmd': 'gpio_set 3 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.015
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.032
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.035
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.118
INFO
${RESULT} = {'cmd': 'gpio_clear 3 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.121
INFO
${RESULT} = {'cmd': 'gpio_clear 3 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.238
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.255
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.259
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Resets the device
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:39.317
INFO
Starting process: make reset
23:30:39.327
INFO
Waiting for process to complete.
23:30:40.431
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:43.436
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
23:30:43.471
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 26.01.2022 - 23:30 / 26.01.2022 - 23:30