Summary


Boardsamr34-xpro
Testsuitetests_xtimer_benchmarks
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:1800:03:41.793
100%

Log


Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:02.755
INFO
Starting process: make reset
00:18:02.766
INFO
Waiting for process to complete.
00:18:03.853
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:03.857
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.111
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Record the timer version
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.253
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.373
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.377
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.401
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.404
INFO
VALUE: xtimer
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.487
INFO
Starting process: make reset
00:18:04.498
INFO
Waiting for process to complete.
00:18:05.644
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.648
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.922
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.062
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the specified keyword multiple times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.154
INFO
Repeating keyword, round 1/20.
00:18:06.681
INFO
Repeating keyword, round 2/20.
00:18:07.204
INFO
Repeating keyword, round 3/20.
00:18:07.732
INFO
Repeating keyword, round 4/20.
00:18:08.262
INFO
Repeating keyword, round 5/20.
00:18:08.782
INFO
Repeating keyword, round 6/20.
00:18:09.308
INFO
Repeating keyword, round 7/20.
00:18:09.827
INFO
Repeating keyword, round 8/20.
00:18:10.345
INFO
Repeating keyword, round 9/20.
00:18:10.866
INFO
Repeating keyword, round 10/20.
00:18:11.386
INFO
Repeating keyword, round 11/20.
00:18:11.905
INFO
Repeating keyword, round 12/20.
00:18:12.428
INFO
Repeating keyword, round 13/20.
00:18:12.950
INFO
Repeating keyword, round 14/20.
00:18:13.493
INFO
Repeating keyword, round 15/20.
00:18:14.011
INFO
Repeating keyword, round 16/20.
00:18:14.531
INFO
Repeating keyword, round 17/20.
00:18:15.050
INFO
Repeating keyword, round 18/20.
00:18:15.567
INFO
Repeating keyword, round 19/20.
00:18:16.088
INFO
Repeating keyword, round 20/20.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.250
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.253
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.577
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018940778, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018941778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.587
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018940778, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018941778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.637
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.645
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.649
INFO
VALUE: [0, 1.000000000001e-06, 0.0010437910000000022, 9.999999999975306e-07, 0.0010432920000000012, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010437909999999988, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.329999999986959e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.001043763000000003, 8.339999999981695e-07, 0.0010437910000000022, 8.479999999977395e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010438190000000014, 8.329999999986959e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438059999999943, 8.470000000052047e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437920000000017, 8.32999999991757e-07, 0.001043778000000009, 8.469999999982658e-07, 0.0010437920000000017, 8.32999999991757e-07, 0.0010437920000000017, 8.330000000056348e-07, 0.0010438049999999949, 1.000000000001e-06, 0.001043638999999999, 8.340000000051084e-07, 0.0010437909999999884, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.775
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.779
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.098
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017810167, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017811, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.108
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017810167, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017811, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.159
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.168
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.171
INFO
VALUE: [0, 8.330000000021653e-07, 0.001043958000000001, 8.339999999981695e-07, 0.001043638999999999, 8.330000000021653e-07, 0.001043818999999998, 8.34000000001639e-07, 0.001043818999999998, 8.330000000021653e-07, 0.0010437919999999982, 8.330000000021653e-07, 0.001043848, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010438190000000014, 9.999999999975306e-07, 0.0010436249999999994, 8.470000000017353e-07, 0.0010437919999999982, 8.330000000021653e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 8.469999999982658e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010437909999999953, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437640000000026, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 9.999999999940612e-07, 0.0010435970000000003, 8.340000000051084e-07, 0.0010438190000000014, 8.32999999991757e-07, 0.001043778000000009, 8.32999999991757e-07, 0.001043778000000009, 8.339999999912306e-07, 0.001043833000000008, 8.32999999991757e-07, 0.0010437920000000017, 8.330000000056348e-07, 0.0010438059999999943, 1.000000000001e-06, 0.001043638999999999, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.300
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.303
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.623
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018620986, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018621819, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.634
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018620986, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018621819, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.686
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.695
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.698
INFO
VALUE: [0, 8.330000000021653e-07, 0.0010441809999999982, 8.330000000021653e-07, 0.0010436109999999998, 8.339999999981695e-07, 0.0010437779999999987, 8.330000000021653e-07, 0.0010437779999999987, 8.330000000021653e-07, 0.0010438059999999978, 8.330000000021653e-07, 0.0010437919999999982, 8.330000000021653e-07, 0.0010437919999999982, 8.329999999986959e-07, 0.0010438190000000014, 8.34000000001639e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010437909999999988, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.001043834000000004, 8.329999999986959e-07, 0.001043833000000001, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438049999999949, 8.330000000056348e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438190000000014, 9.999999999940612e-07, 0.001043639000000006, 8.339999999981695e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438189999999944, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437919999999948, 8.329999999986959e-07, 0.0010438340000000004, 8.330000000056348e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010437639999999956, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437770000000027, 8.339999999981695e-07, 0.001043833000000001, 8.329999999986959e-07, 0.0010437780000000021, 1.000000000001e-06, 0.001043638999999999, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437779999999952, 8.470000000121436e-07, 0.0010437919999999878, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.826
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.830
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.153
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018329583, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018330417, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.163
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018329583, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018330417, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.213
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.221
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.225
INFO
VALUE: [0, 8.34000000001639e-07, 0.0010439579999999976, 8.330000000021653e-07, 0.0010436529999999986, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.469999999982658e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 9.999999999975306e-07, 0.0010436379999999995, 8.34000000001639e-07, 0.0010437639999999991, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.001043833000000001, 8.339999999981695e-07, 0.0010438190000000014, 1.000000000001e-06, 0.0010436529999999986, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437640000000026, 8.329999999986959e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437770000000027, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.32999999991757e-07, 0.0010438060000000082, 8.32999999991757e-07, 0.0010437920000000017, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437920000000017, 8.32999999991757e-07, 0.0010438060000000082, 8.32999999991757e-07, 0.001043778000000009, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.355
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.359
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.678
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018407306, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018408139, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.688
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018407306, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018408139, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.737
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.746
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.749
INFO
VALUE: [0, 8.330000000021653e-07, 0.001043638999999999, 8.330000000021653e-07, 0.0010436249999999994, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010437909999999988, 8.34000000001639e-07, 0.0010437639999999991, 8.330000000021653e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438190000000014, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437779999999952, 8.340000000051084e-07, 0.0010438189999999944, 8.330000000056348e-07, 0.001043819999999994, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438189999999944, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010437909999999953, 8.339999999981695e-07, 0.001043833000000001, 8.330000000056348e-07, 0.001043819999999994, 8.330000000056348e-07, 0.0010438189999999944, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438189999999944, 8.340000000051084e-07, 0.0010438049999999949, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.329999999986959e-07, 0.0010437920000000017, 8.469999999982658e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000082, 8.32999999991757e-07, 0.0010437779999999952, 8.470000000121436e-07, 0.0010437919999999878, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437920000000017, 8.330000000056348e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.875
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.878
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.197
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017728236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017729236, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.207
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017728236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017729236, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.257
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.268
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.272
INFO
VALUE: [0, 9.999999999975306e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.001043653000000002, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010437779999999987, 8.330000000021653e-07, 0.0010437919999999982, 8.330000000021653e-07, 0.0010437919999999982, 8.470000000017353e-07, 0.001043818999999998, 8.34000000001639e-07, 0.0010437769999999992, 8.339999999981695e-07, 0.0010437769999999992, 8.480000000046783e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010437639999999956, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437780000000021, 8.469999999982658e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010438190000000014, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.469999999982658e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 1.000000000001e-06, 0.001043638999999999, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 1.000000000001e-06, 0.001043638999999999, 8.329999999986959e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437920000000017, 8.32999999991757e-07, 0.0010438200000000009, 8.330000000056348e-07, 0.0010437920000000017, 8.32999999991757e-07, 0.0010438050000000088, 8.339999999912306e-07, 0.0010438050000000088, 8.339999999912306e-07, 0.0010438050000000088, 8.339999999912306e-07, 0.0010437910000000022, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.401
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.404
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.722
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017954236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017955083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.732
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017954236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017955083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.783
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.791
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.794
INFO
VALUE: [0, 8.470000000017353e-07, 0.0010436249999999994, 8.34000000001639e-07, 0.001043651999999999, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437639999999991, 8.34000000001639e-07, 0.0010437909999999988, 8.34000000001639e-07, 0.0010438049999999983, 8.330000000021653e-07, 0.0010437919999999982, 8.329999999986959e-07, 0.0010438060000000048, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438049999999949, 1.000000000001e-06, 0.0010436249999999994, 8.340000000051084e-07, 0.0010437909999999953, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437770000000027, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437780000000021, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438060000000013, 1.000000000001e-06, 0.0010436249999999994, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.469999999982658e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010437920000000017, 9.999999999940612e-07, 0.001043639000000006, 8.329999999986959e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.001043819999999994, 8.330000000056348e-07, 0.0010437920000000017, 8.469999999982658e-07, 0.0010437910000000022, 8.339999999912306e-07, 0.0010437910000000022, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010437769999999957, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.920
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.923
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.241
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017762667, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.0177635, 'source': 'DUT_IC', 'event': 'RISIN...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.251
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017762667, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.0177635, 'source': 'DUT_IC', 'event': 'RISIN...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.301
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.309
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.312
INFO
VALUE: [0, 8.330000000021653e-07, 0.0010438059999999978, 8.330000000021653e-07, 0.0010436529999999986, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437780000000021, 8.469999999982658e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437909999999988, 8.34000000001639e-07, 0.0010437909999999988, 8.34000000001639e-07, 0.0010438049999999983, 1.000000000001e-06, 0.0010436670000000016, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 1.000000000001e-06, 0.0010436249999999994, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.001043833000000001, 8.339999999981695e-07, 0.0010437770000000027, 9.999999999940612e-07, 0.001043639000000006, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437779999999952, 1.000000000001e-06, 0.001043638999999999, 8.330000000056348e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437919999999948, 1.000000000001e-06, 0.0010436249999999994, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438189999999944, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438189999999944, 8.330000000056348e-07, 0.0010437919999999948, 8.470000000052047e-07, 0.0010437779999999952, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 1.000000000001e-06, 0.0010436249999999994, 1.000000000001e-06, 0.0010436249999999994, 8.329999999986959e-07, 0.0010438060000000013, 1.000000000001e-06, 0.0010436249999999994, 8.329999999986959e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438200000000009, 8.330000000056348e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010437779999999952, 1.000000000001e-06, 0.0010436379999999995, 8.340000000051084e-07, 0.001043832999999994, 8.330000000056348e-07, 0.0010437779999999952, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.438
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.441
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.759
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017874764, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017875597, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.769
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017874764, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017875597, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.820
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.828
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.832
INFO
VALUE: [0, 8.329999999986959e-07, 0.0010442919999999987, 8.330000000021653e-07, 0.0010436249999999994, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437919999999982, 8.330000000021653e-07, 0.0010438050000000018, 8.479999999977395e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.001043819999999994, 8.330000000056348e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.001043832999999994, 8.340000000051084e-07, 0.0010437769999999957, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438049999999949, 8.330000000056348e-07, 0.0010437779999999952, 8.469999999982658e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438340000000004, 8.330000000056348e-07, 0.0010437919999999948, 8.329999999986959e-07, 0.0010438060000000013, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.001043832999999994, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438049999999949, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438340000000004, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.0010438200000000009, 8.32999999991757e-07, 0.0010438190000000014, 8.340000000051084e-07, 0.0010437769999999957, 8.340000000051084e-07, 0.001043832999999994, 8.330000000056348e-07, 0.0010437920000000017, 8.32999999991757e-07, 0.001043778000000009, 8.339999999912306e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.961
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.964
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.283
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018042806, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018043806, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.292
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018042806, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018043806, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.342
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.350
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.354
INFO
VALUE: [0, 9.999999999975306e-07, 0.0010439720000000006, 8.329999999986959e-07, 0.001043653000000002, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437909999999988, 8.34000000001639e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437769999999992, 8.34000000001639e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010437909999999988, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 1.000000000001e-06, 0.001043638999999999, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 1.000000000001e-06, 0.0010436529999999986, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438049999999949, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010437919999999948, 8.329999999986959e-07, 0.0010438060000000013, 8.330000000056348e-07, 0.001043819999999994, 1.000000000001e-06, 0.001043638999999999, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010437639999999956, 8.469999999982658e-07, 0.0010438050000000018, 8.340000000051084e-07, 0.0010437910000000022, 8.339999999912306e-07, 0.0010438050000000088, 8.339999999912306e-07, 0.0010437910000000022, 8.340000000051084e-07, 0.0010437909999999884, 8.340000000051084e-07, 0.0010438190000000014, 8.330000000056348e-07, 0.0010437779999999952, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.479
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.483
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.801
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017904931, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017905931, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.811
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017904931, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017905931, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.860
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.869
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.872
INFO
VALUE: [0, 1.000000000001e-06, 0.0010439299999999985, 8.330000000021653e-07, 0.0010436529999999986, 8.34000000001639e-07, 0.0010437909999999988, 1.000000000001e-06, 0.0010436529999999986, 8.330000000021653e-07, 0.0010437639999999991, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.469999999982658e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437909999999988, 8.340000000051084e-07, 0.0010438189999999944, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010437909999999953, 8.340000000051084e-07, 0.0010438049999999949, 8.329999999986959e-07, 0.0010437780000000021, 8.339999999981695e-07, 0.001043833000000001, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 1.000000000001e-06, 0.0010436249999999994, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437640000000026, 8.469999999982658e-07, 0.0010437920000000017, 8.469999999982658e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.0010438190000000014, 8.479999999977395e-07, 0.0010437769999999957, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010438190000000014, 8.32999999991757e-07, 0.0010438060000000082, 8.32999999991757e-07, 0.0010437920000000017, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.998
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.001
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.320
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017836069, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017836903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.330
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017836069, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017836903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.384
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.392
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.396
INFO
VALUE: [0, 8.34000000001639e-07, 0.0010444579999999981, 8.330000000021653e-07, 0.0010436669999999981, 8.470000000017353e-07, 0.0010437779999999987, 8.329999999986959e-07, 0.0010437780000000021, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438060000000013, 8.469999999982658e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438049999999983, 8.339999999981695e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010438470000000005, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437770000000027, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437780000000021, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.469999999982658e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010437639999999956, 8.330000000056348e-07, 0.0010438200000000009, 8.32999999991757e-07, 0.0010437920000000017, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.0010438190000000014, 8.339999999912306e-07, 0.0010438050000000088, 8.339999999912306e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.522
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.525
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.844
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017901069, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017901903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.854
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017901069, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017901903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.905
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.914
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.917
INFO
VALUE: [0, 8.34000000001639e-07, 0.0010442909999999993, 8.34000000001639e-07, 0.001043638999999999, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437909999999988, 8.34000000001639e-07, 0.0010437779999999987, 8.330000000021653e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010437909999999988, 8.34000000001639e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010438049999999983, 8.34000000001639e-07, 0.0010437769999999992, 8.339999999981695e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010437640000000026, 8.329999999986959e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438200000000009, 8.329999999986959e-07, 0.0010438050000000018, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438190000000014, 8.339999999981695e-07, 0.0010437910000000022, 8.339999999981695e-07, 0.0010438050000000018, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010437920000000017, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.0010438059999999943, 1.000000000001e-06, 0.001043638999999999, 8.330000000056348e-07, 0.0010437919999999948, 1.000000000001e-06, 0.0010436529999999986, 8.330000000056348e-07, 0.0010437919999999948, 8.330000000056348e-07, 0.0010438059999999943, 8.330000000056348e-07, 0.001043832999999994, 8.340000000051084e-07, 0.0010437769999999957, 8.340000000051084e-07, 0.0010438049999999949, 8.340000000051084e-07, 0.0010437909999999953, 8.339999999981695e-07, 0.0010438050000000018, 8.330000000056348e-07, 0.0010437920000000017, 8.32999999991757e-07, 0.0010438060000000082, 8.32999999991757e-07, 0.0010438200000000009, 8.330000000056348e-07, 0.0010437779999999952, 1.000000000001e-06, 0.001043638999999999, 8.469999999982658e-07, 0.0010437920000000017, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.043
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.046
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}