Summary


Boardsamr34-xpro
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.07-devel-506-gdc7bc9f854
HIL Tests Version
8fe8d2d38b
Date / Time
22.05.202200:2200:00:38.665
100%

Log


Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:23
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:38.167
INFO
Starting process: make reset
00:22:38.180
INFO
Waiting for process to complete.
00:22:39.299
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:39.303
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:39.318
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:39.479
INFO
Starting process: make reset
00:22:39.495
INFO
Waiting for process to complete.
00:22:40.587
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.591
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.608
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.718
INFO
${RESULT} = {'cmd': 'gpio_set 0 28', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.722
INFO
${RESULT} = {'cmd': 'gpio_set 0 28', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.843
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.862
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.866
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.912
INFO
${RESULT} = {'cmd': 'gpio_clear 0 28', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:40.915
INFO
${RESULT} = {'cmd': 'gpio_clear 0 28', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:41.044
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:41.070
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:41.075
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:41.179
INFO
Starting process: make reset
00:22:41.191
INFO
Waiting for process to complete.
00:22:42.284
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.288
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.305
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.415
INFO
${RESULT} = {'cmd': 'gpio_set 0 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.419
INFO
${RESULT} = {'cmd': 'gpio_set 0 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.538
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.564
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.570
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.640
INFO
${RESULT} = {'cmd': 'gpio_clear 0 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.644
INFO
${RESULT} = {'cmd': 'gpio_clear 0 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.763
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.781
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.785
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:42.847
INFO
Starting process: make reset
00:22:42.858
INFO
Waiting for process to complete.
00:22:43.943
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:43.947
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:43.964
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.078
INFO
${RESULT} = {'cmd': 'gpio_set 0 27', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.083
INFO
${RESULT} = {'cmd': 'gpio_set 0 27', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.207
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.229
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.233
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.285
INFO
${RESULT} = {'cmd': 'gpio_clear 0 27', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.290
INFO
${RESULT} = {'cmd': 'gpio_clear 0 27', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.409
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.426
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.430
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:23
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:44.784
INFO
Starting process: make reset
00:22:44.796
INFO
Waiting for process to complete.
00:22:45.945
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:45.950
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:45.965
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:46.091
INFO
Starting process: make reset
00:22:46.102
INFO
Waiting for process to complete.
00:22:47.217
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:47.223
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:47.247
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:47.355
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:47.408
INFO
Starting process: make reset
00:22:47.420
INFO
Waiting for process to complete.
00:22:48.508
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:48.512
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:48.530
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:48.622
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:48.677
INFO
Starting process: make reset
00:22:48.689
INFO
Waiting for process to complete.
00:22:49.807
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:49.812
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:49.828
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:49.922
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:49.976
INFO
Starting process: make reset
00:22:49.987
INFO
Waiting for process to complete.
00:22:51.104
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:51.110
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:51.131
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:51.233
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:51.288
INFO
Starting process: make reset
00:22:51.300
INFO
Waiting for process to complete.
00:22:52.413
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.417
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.434
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.557
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.561
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.597
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.601
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.632
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.635
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.672
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.676
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.719
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.725
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.771
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.777
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.816
INFO
${RESULT} = {'cmd': 'gpio_set 0 23', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.820
INFO
${RESULT} = {'cmd': 'gpio_set 0 23', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.941
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.961
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:52.965
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:53.012
INFO
${RESULT} = {'cmd': 'gpio_clear 0 23', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:53.015
INFO
${RESULT} = {'cmd': 'gpio_clear 0 23', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:53.135
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:53.154
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:53.158
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Resets the device
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:53.225
INFO
Starting process: make reset
00:22:53.236
INFO
Waiting for process to complete.
00:22:54.334
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.340
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.363
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.486
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.490
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.526
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.530
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.562
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.566
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.603
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.607
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.643
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:22 / 22.05.2022 - 00:22
00:22:54.647
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}