Summary


Boardsamr30-xpro
Testsuitetests_xtimer_benchmarks
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:1800:03:40.424
100%

Log


Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:03.956
INFO
Starting process: make reset
00:18:03.967
INFO
Waiting for process to complete.
00:18:05.031
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.035
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.271
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Record the timer version
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.410
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.529
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.532
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.556
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.559
INFO
VALUE: xtimer
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:05.640
INFO
Starting process: make reset
00:18:05.651
INFO
Waiting for process to complete.
00:18:06.739
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:06.745
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.009
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.145
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the specified keyword multiple times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.243
INFO
Repeating keyword, round 1/20.
00:18:07.770
INFO
Repeating keyword, round 2/20.
00:18:08.295
INFO
Repeating keyword, round 3/20.
00:18:08.818
INFO
Repeating keyword, round 4/20.
00:18:09.337
INFO
Repeating keyword, round 5/20.
00:18:09.864
INFO
Repeating keyword, round 6/20.
00:18:10.383
INFO
Repeating keyword, round 7/20.
00:18:10.904
INFO
Repeating keyword, round 8/20.
00:18:11.427
INFO
Repeating keyword, round 9/20.
00:18:11.946
INFO
Repeating keyword, round 10/20.
00:18:12.470
INFO
Repeating keyword, round 11/20.
00:18:12.988
INFO
Repeating keyword, round 12/20.
00:18:13.521
INFO
Repeating keyword, round 13/20.
00:18:14.049
INFO
Repeating keyword, round 14/20.
00:18:14.571
INFO
Repeating keyword, round 15/20.
00:18:15.089
INFO
Repeating keyword, round 16/20.
00:18:15.613
INFO
Repeating keyword, round 17/20.
00:18:16.137
INFO
Repeating keyword, round 18/20.
00:18:16.657
INFO
Repeating keyword, round 19/20.
00:18:17.185
INFO
Repeating keyword, round 20/20.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.338
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.342
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.666
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018456542, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018457375, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.676
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018456542, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018457375, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.725
INFO
${GPIO_OVERHEAD} = {'time': [0.018456542, 0.018457375, 0.019500264, 0.019501097, 0.020543806, 0.020544639, 0.021587528, 0.021588361, 0.022631236, 0.022632069, 0.023674972, 0.023675806, 0.024718722, 0.024719556, 0.025762...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.734
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.737
INFO
VALUE: [0, 8.330000000021653e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010427090000000028, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.0010429029999999978, 8.34000000001639e-07, 0.001042915999999998, 8.34000000001639e-07, 0.0010428879999999988, 8.34000000001639e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.001042862000000002, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.001042860999999999, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.001042833, 8.329999999986959e-07, 0.0010429029999999978, 8.339999999981695e-07, 0.001042833, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.001042915999999998, 8.339999999981695e-07, 0.0010428470000000065, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010428879999999988, 8.340000000051084e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010427640000000016, 8.329999999986959e-07, 0.001042861000000006, 8.339999999981695e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010428609999999922, 8.340000000051084e-07, 0.0010428890000000052, 8.32999999991757e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.0010428880000000057, 8.339999999912306e-07, 0.001042861000000006, 8.32999999991757e-07, 0.0010428340000000064, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.862
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.866
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.185
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017719153, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017719986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.194
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017719153, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017719986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.245
INFO
${GPIO_OVERHEAD} = {'time': [0.017719153, 0.017719986, 0.018763542, 0.018764375, 0.019807236, 0.019808069, 0.020850903, 0.020851736, 0.021894611, 0.021895444, 0.022938319, 0.022939153, 0.023982056, 0.023982889, 0.025025...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.253
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.257
INFO
VALUE: [0, 8.329999999986959e-07, 0.001043556000000001, 8.329999999986959e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.0010429030000000013, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.0010429029999999978, 8.330000000021653e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010428619999999986, 8.330000000021653e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010427920000000007, 8.329999999986959e-07, 0.0010428889999999982, 8.340000000051084e-07, 0.0010429019999999983, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010429020000000053, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429169999999974, 8.330000000056348e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010429160000000048, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010429019999999983, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.001042915999999998, 8.339999999981695e-07, 0.001042860999999999, 8.330000000056348e-07, 0.001042860999999999, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.001042833, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.001042833, 8.330000000056348e-07, 0.0010429029999999978, 8.32999999991757e-07, 0.0010428890000000052, 8.340000000051084e-07, 0.0010429019999999983, 8.339999999912306e-07, 0.0010428470000000134, 8.32999999991757e-07, 0.0010428890000000052, 8.32999999991757e-07, 0.0010428749999999987, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.388
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.392
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.714
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017682056, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017682889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.723
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017682056, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017682889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.773
INFO
${GPIO_OVERHEAD} = {'time': [0.017682056, 0.017682889, 0.01872625, 0.018727083, 0.019769972, 0.019770806, 0.020813694, 0.020814528, 0.021857375, 0.021858208, 0.022901056, 0.022901889, 0.023944736, 0.023945569, 0.0249884...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.782
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.785
INFO
VALUE: [0, 8.329999999986959e-07, 0.0010433609999999996, 8.329999999986959e-07, 0.0010428890000000017, 8.339999999981695e-07, 0.0010428880000000022, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000021653e-07, 0.001042847999999999, 8.330000000021653e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.001042847999999999, 8.330000000021653e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428610000000026, 8.339999999981695e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.001042818999999997, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428470000000065, 8.339999999981695e-07, 0.001042833, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010429300000000044, 8.339999999981695e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429030000000047, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428469999999995, 8.479999999977395e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428749999999987, 8.470000000052047e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.001042860999999999, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999912306e-07, 0.0010429160000000048, 8.340000000051084e-07, 0.0010428749999999987, 8.32999999991757e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.0010429019999999983, 8.340000000051084e-07, 0.0010428749999999987, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.911
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.915
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.234
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018045625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018046458, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.243
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018045625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018046458, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.293
INFO
${GPIO_OVERHEAD} = {'time': [0.018045625, 0.018046458, 0.019089778, 0.019090611, 0.020133431, 0.020134264, 0.021177139, 0.021177972, 0.022220833, 0.022221667, 0.023264528, 0.023265361, 0.024308236, 0.024309069, 0.025351...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.301
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.305
INFO
VALUE: [0, 8.330000000021653e-07, 0.0010433200000000004, 8.329999999986959e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.001042860999999999, 8.34000000001639e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.001042862000000002, 8.329999999986959e-07, 0.001042833, 8.34000000001639e-07, 0.0010429019999999983, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042833, 8.34000000001639e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.001042944000000004, 8.339999999981695e-07, 0.001042860999999999, 8.469999999982658e-07, 0.0010428060000000003, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010429449999999965, 8.329999999986959e-07, 0.0010428470000000065, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042848000000006, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010428749999999987, 8.469999999982658e-07, 0.001042860999999999, 8.470000000052047e-07, 0.001042833, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.001042833, 8.330000000056348e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010429029999999978, 8.330000000056348e-07, 0.001042860999999999, 8.469999999982658e-07, 0.001042861000000006, 8.339999999912306e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042832999999993, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999912306e-07, 0.001042861000000006, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.431
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.435
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.753
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018497681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018498528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.764
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018497681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018498528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.819
INFO
${GPIO_OVERHEAD} = {'time': [0.018497681, 0.018498528, 0.019541736, 0.019542569, 0.020585431, 0.020586264, 0.021629139, 0.021629972, 0.022672847, 0.022673681, 0.023716542, 0.023717375, 0.02476025, 0.024761083, 0.0258039...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.828
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.832
INFO
VALUE: [0, 8.470000000017353e-07, 0.0010432080000000003, 8.329999999986959e-07, 0.001042862000000002, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010429030000000013, 8.329999999986959e-07, 0.0010428339999999994, 8.330000000021653e-07, 0.0010429029999999978, 8.330000000021653e-07, 0.0010428889999999982, 8.330000000021653e-07, 0.001042847999999999, 8.329999999986959e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.0010428050000000008, 8.339999999981695e-07, 0.001042861000000006, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010429029999999978, 8.470000000052047e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010429169999999974, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042833, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.001042860999999999, 8.330000000056348e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428619999999986, 8.469999999982658e-07, 0.001042833, 8.470000000052047e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010428879999999988, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428339999999994, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428889999999982, 8.340000000051084e-07, 0.001042860999999999, 8.32999999991757e-07, 0.0010428470000000134, 8.339999999912306e-07, 0.0010429019999999983, 8.340000000051084e-07, 0.001042832999999993, 8.330000000056348e-07, 0.0010428199999999999, 8.330000000056348e-07, 0.0010428889999999913, 8.469999999982658e-07, 0.0010428469999999995, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.957
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.961
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.279
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017786917, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017787917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.289
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017786917, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017787917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.338
INFO
${GPIO_OVERHEAD} = {'time': [0.017786917, 0.017787917, 0.018830611, 0.018831444, 0.019874333, 0.019875167, 0.020918014, 0.020918847, 0.021961722, 0.021962556, 0.023005417, 0.02300625, 0.024049139, 0.024049972, 0.0250928...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.347
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.351
INFO
VALUE: [0, 1.000000000001e-06, 0.0010426940000000003, 8.329999999986959e-07, 0.0010428890000000017, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.0010428890000000017, 8.339999999981695e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.001042846999999996, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.0010428470000000065, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.0010428879999999988, 8.339999999981695e-07, 0.001042860999999999, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010429029999999978, 8.330000000056348e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428619999999986, 8.330000000056348e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010428050000000008, 8.339999999981695e-07, 0.0010428880000000057, 8.339999999981695e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042833, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.001042861000000006, 8.469999999982658e-07, 0.0010428749999999987, 8.339999999912306e-07, 0.0010429019999999983, 8.340000000051084e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999912306e-07, 0.0010428890000000052, 8.330000000056348e-07, 0.0010428749999999987, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.477
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.480
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.799
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017965917, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01796675, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.808
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017965917, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01796675, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.859
INFO
${GPIO_OVERHEAD} = {'time': [0.017965917, 0.01796675, 0.019009833, 0.019010667, 0.020053486, 0.020054319, 0.021097236, 0.021098069, 0.022140931, 0.022141764, 0.023184611, 0.023185444, 0.024228347, 0.024229181, 0.025272,...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.868
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.871
INFO
VALUE: [0, 8.329999999986959e-07, 0.0010430830000000002, 8.339999999981695e-07, 0.0010428190000000004, 8.330000000021653e-07, 0.0010429169999999974, 8.330000000021653e-07, 0.0010428619999999986, 8.330000000021653e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429030000000013, 8.339999999981695e-07, 0.0010428190000000004, 8.330000000021653e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428199999999999, 8.330000000021653e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.001042861000000006, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042861000000006, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428469999999995, 8.32999999991757e-07, 0.0010429030000000117, 8.339999999912306e-07, 0.001042833000000007, 8.32999999991757e-07, 0.0010428199999999999, 8.330000000056348e-07, 0.001042832999999993, 8.340000000051084e-07, 0.0010428749999999987, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.996
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.000
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.318
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017695833, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017696833, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.327
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017695833, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017696833, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.379
INFO
${GPIO_OVERHEAD} = {'time': [0.017695833, 0.017696833, 0.018739667, 0.0187405, 0.019783375, 0.019784208, 0.020827097, 0.020827931, 0.021870792, 0.021871625, 0.0229145, 0.022915333, 0.023958153, 0.023958986, 0.025001861,...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.388
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.393
INFO
VALUE: [0, 9.999999999975306e-07, 0.001042834000000003, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.0010428889999999982, 8.34000000001639e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428199999999999, 8.330000000021653e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042862000000002, 8.329999999986959e-07, 0.001042833, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428199999999999, 8.330000000021653e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428469999999995, 8.479999999977395e-07, 0.001042861000000006, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428619999999986, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010427920000000007, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428190000000004, 8.329999999986959e-07, 0.0010428890000000052, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042860999999999, 8.330000000056348e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.001042833, 8.469999999982658e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428339999999994, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042847999999999, 8.470000000052047e-07, 0.0010428049999999939, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428750000000056, 8.32999999991757e-07, 0.0010428890000000052, 8.339999999912306e-07, 0.001042861000000006, 8.330000000056348e-07, 0.0010428199999999999, 8.32999999991757e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428890000000052, 8.32999999991757e-07, 0.0010428340000000064, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.520
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.524
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.842
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017881236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017882083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.851
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017881236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017882083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.901
INFO
${GPIO_OVERHEAD} = {'time': [0.017881236, 0.017882083, 0.018925083, 0.018925917, 0.019968792, 0.019969625, 0.021012486, 0.021013319, 0.022056167, 0.022057, 0.023099833, 0.023100667, 0.0241435, 0.024144333, 0.025187181, ...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.910
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.914
INFO
VALUE: [0, 8.470000000017353e-07, 0.0010429999999999988, 8.34000000001639e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428480000000025, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.001042833, 8.330000000021653e-07, 0.001042847999999999, 8.330000000021653e-07, 0.0010429169999999974, 8.330000000021653e-07, 0.0010429169999999974, 8.330000000021653e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429170000000008, 8.329999999986959e-07, 0.0010428750000000021, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.001042860999999999, 8.470000000052047e-07, 0.001042847999999999, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429030000000047, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042861000000006, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.001042833, 8.329999999986959e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.001042833000000007, 8.339999999912306e-07, 0.001042861000000006, 8.32999999991757e-07, 0.0010428890000000052, 8.330000000056348e-07, 0.0010428749999999987, 8.339999999912306e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010429029999999978, 8.330000000056348e-07, 0.0010428749999999987, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.040
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.043
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.362
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018050542, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018051375, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.374
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018050542, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018051375, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.425
INFO
${GPIO_OVERHEAD} = {'time': [0.018050542, 0.018051375, 0.019094222, 0.019095056, 0.020137861, 0.020138694, 0.021181611, 0.021182444, 0.022225306, 0.022226139, 0.023269, 0.023269833, 0.024312722, 0.024313556, 0.025356375...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.433
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.437
INFO
VALUE: [0, 8.330000000021653e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428050000000008, 8.329999999986959e-07, 0.0010429170000000008, 8.330000000021653e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.0010428610000000026, 8.329999999986959e-07, 0.0010428889999999982, 8.34000000001639e-07, 0.0010428190000000004, 8.329999999986959e-07, 0.0010429030000000013, 8.329999999986959e-07, 0.0010428339999999994, 8.330000000021653e-07, 0.001042860999999999, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.001042833, 8.469999999982658e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.0010428879999999988, 8.339999999981695e-07, 0.001042861000000006, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.001042861000000006, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428889999999982, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042861000000006, 8.339999999981695e-07, 0.001042833, 8.329999999986959e-07, 0.0010428889999999982, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429030000000047, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042861000000006, 8.339999999912306e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428890000000052, 8.32999999991757e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428889999999913, 8.330000000056348e-07, 0.0010428889999999913, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.563
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.566
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.884
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018000181, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018001181, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.894
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018000181, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018001181, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.943
INFO
${GPIO_OVERHEAD} = {'time': [0.018000181, 0.018001181, 0.019044681, 0.019045514, 0.020088361, 0.020089194, 0.021132069, 0.021132903, 0.022175778, 0.022176611, 0.0232195, 0.023220333, 0.024263194, 0.024264028, 0.02530688...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.952
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.955
INFO
VALUE: [0, 1.000000000001e-06, 0.0010434999999999993, 8.329999999986959e-07, 0.0010428469999999995, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.001042860999999999, 8.34000000001639e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428469999999995, 8.330000000021653e-07, 0.0010429029999999978, 8.34000000001639e-07, 0.0010428879999999988, 8.34000000001639e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010428469999999995, 8.469999999982658e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429169999999974, 8.330000000056348e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010429029999999978, 8.330000000056348e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010429169999999974, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.001042944000000004, 8.329999999986959e-07, 0.0010428749999999917, 8.340000000051084e-07, 0.001042861000000006, 8.32999999991757e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428190000000004, 8.330000000056348e-07, 0.0010428749999999987, 8.339999999912306e-07, 0.0010428890000000052, 8.32999999991757e-07, 0.0010428750000000125, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.081
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.085
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.403
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017998694, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017999528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.412
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017998694, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017999528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.468
INFO
${GPIO_OVERHEAD} = {'time': [0.017998694, 0.017999528, 0.01904275, 0.019043583, 0.020086458, 0.020087292, 0.021130167, 0.021131, 0.022173792, 0.022174625, 0.0232175, 0.023218333, 0.024261208, 0.024262042, 0.025304917, 0...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.479
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.483
INFO
VALUE: [0, 8.34000000001639e-07, 0.001043222, 8.329999999986959e-07, 0.0010428750000000021, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.0010427920000000007, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042847000000003, 8.469999999982658e-07, 0.0010429170000000008, 8.329999999986959e-07, 0.0010429030000000013, 8.339999999981695e-07, 0.0010429020000000018, 8.339999999981695e-07, 0.0010428610000000026, 8.329999999986959e-07, 0.0010429169999999974, 8.470000000052047e-07, 0.001042833, 8.339999999981695e-07, 0.0010428190000000004, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.001042833, 8.329999999986959e-07, 0.0010429030000000047, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428879999999988, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429029999999978, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429170000000043, 8.32999999991757e-07, 0.001042847999999999, 8.330000000056348e-07, 0.001042861000000006, 8.32999999991757e-07, 0.0010428890000000052, 8.339999999912306e-07, 0.001042861000000006, 8.330000000056348e-07, 0.001042832999999993, 8.340000000051084e-07, 0.0010429029999999978, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.622
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.626
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.945
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.023085528, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.023086528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.954
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.023085528, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.023086528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.004
INFO
${GPIO_OVERHEAD} = {'time': [0.023085528, 0.023086528, 0.024130069, 0.024130903, 0.025173708, 0.025174542, 0.026217375, 0.026218208, 0.027261125, 0.027261958, 0.028304833, 0.028305667, 0.029348528, 0.029349361, 0.030392...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.012
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.016
INFO
VALUE: [0, 9.999999999975306e-07, 0.001043541000000002, 8.339999999981695e-07, 0.0010428050000000008, 8.34000000001639e-07, 0.001042833, 8.329999999986959e-07, 0.0010429170000000008, 8.329999999986959e-07, 0.0010428750000000021, 8.339999999981695e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010429029999999978, 8.330000000021653e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042848000000006, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428890000000052, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010429169999999974, 8.330000000056348e-07, 0.001042860999999999, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042833, 8.340000000051084e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.0010428619999999986, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428340000000064, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042860999999999, 8.469999999982658e-07, 0.0010429580000000035, 8.339999999981695e-07, 0.0010428609999999922, 8.330000000056348e-07, 0.001042861000000006, 8.339999999912306e-07, 0.001042861000000006, 8.32999999991757e-07, 0.0010429170000000043, 8.330000000056348e-07, 0.0010428749999999987, 8.32999999991757e-07, 0.0010429030000000117, 8.339999999912306e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428749999999987, 8.339999999912306e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010429170000000043, 8.32999999991757e-07, 0.0010428749999999987, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.145
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.148
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}