Summary


Boardsamr21-xpro
Testsuitetests_periph_i2c
Status
FAIL
RIOT Version
2023.01-devel-532-g945af26648
HIL Tests Version
5e18f75314
Date / Time
03.12.202223:2700:00:55.314
88%

Log


Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:28
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests
Documentation: Verify basic functionality of the periph I2C API.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/01__periph_i2c_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:25.818
INFO
Starting process: make reset
23:27:25.837
INFO
Waiting for process to complete.
23:27:27.867
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:27.874
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:27.904
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify I2C acquire and release API calls.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:28.104
INFO
Starting process: make reset
23:27:28.124
INFO
Waiting for process to complete.
23:27:30.145
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:30.153
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:30.184
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:30.336
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:30.343
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:30.406
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:30.413
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify acquiring an I2C bus after release.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:30.499
INFO
Starting process: make reset
23:27:30.518
INFO
Waiting for process to complete.
23:27:32.546
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.553
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.584
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.738
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.745
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.813
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.820
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.898
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:32.916
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify that acquiring a locked I2C bus blocks.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:33.012
INFO
Starting process: make reset
23:27:33.033
INFO
Waiting for process to complete.
23:27:35.070
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:35.078
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:35.110
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:35.280
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:35.287
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:36.352
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:36.358
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify recovery of I2C bus after NACK.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:36.442
INFO
Starting process: make reset
23:27:36.461
INFO
Waiting for process to complete.
23:27:38.516
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.524
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.555
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.712
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.718
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.785
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.792
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.861
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Read byte from register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.868
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.932
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:38.938
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify recovery of read bytes NACK.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:39.025
INFO
Starting process: make reset
23:27:39.044
INFO
Waiting for process to complete.
23:27:41.039
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.046
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.079
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.235
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.244
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.326
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.333
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.398
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.405
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.473
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Read byte from the I2C device.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.480
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.543
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.549
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify pins are high after release.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:41.633
INFO
Starting process: make reset
23:27:41.651
INFO
Waiting for process to complete.
23:27:43.642
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.649
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.683
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.839
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.846
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.910
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.916
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.977
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:43.984
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:44.061
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_scl.level,0,1)', ['read_bits(323,5,1)', 'rr 323 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:44.068
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_scl.level,0,1)', ['read_bits(323,5,1)', 'rr 323 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Data driven tests to verify the i2c_write_regs call.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/02__periph_i2c_write_register.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:44.697
INFO
Starting process: make reset
23:27:44.716
INFO
Waiting for process to complete.
23:27:46.719
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:46.727
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:46.760
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:46.956
INFO
Starting process: make reset
23:27:46.975
INFO
Waiting for process to complete.
23:27:48.976
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:48.984
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:49.020
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify bytes are written to a register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:49.215
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:49.222
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:49.287
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:49.294
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:49.408
INFO
Starting process: make reset
23:27:49.427
INFO
Waiting for process to complete.
23:27:51.443
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:51.451
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:51.487
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify bytes are written to a register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:51.692
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:51.699
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:51.764
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:51.771
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:51.886
INFO
Starting process: make reset
23:27:51.905
INFO
Waiting for process to complete.
23:27:53.924
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:53.931
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:53.967
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify bytes are written to a register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:54.181
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:54.188
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:54.257
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:54.272
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Tests to verify correct error codes are given.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:28
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/03__periph_i2c_error_codes.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:54.836
INFO
Starting process: make reset
23:27:54.855
INFO
Waiting for process to complete.
23:27:56.844
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:56.852
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:56.880
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify address NACK (ENXIO) occurs
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:57.069
INFO
Starting process: make reset
23:27:57.088
INFO
Waiting for process to complete.
23:27:59.095
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:59.103
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:59.134
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:59.314
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
23:27:59.321
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ${msg} is not in the last API message
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Verify data NACK (EIO) occurs
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Resets the device
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:27
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:27 / 03.12.2022 - 23:28
23:27:59.444
INFO
Starting process: make reset
23:27:59.462
INFO
Waiting for process to complete.
23:28:01.469
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:01.476
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:01.508
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:01.705
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:01.711
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Fails if ${msg} is not in the last API message
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Release to the I2C bus.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Tests split frame i2c flags.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/04__periph_i2c_flags.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Resets the device
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:02.294
INFO
Starting process: make reset
23:28:02.313
INFO
Waiting for process to complete.
23:28:04.342
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:04.350
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:04.382
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Verify DUT does not lockup if read_byte with NOSTOP
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Resets the device
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:04.587
INFO
Starting process: make reset
23:28:04.606
INFO
Waiting for process to complete.
23:28:06.610
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:06.618
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
23:28:06.653
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28
Documentation: Get access to the I2C bus.
Start / End: 03.12.2022 - 23:28 / 03.12.2022 - 23:28