Summary


Boardsamr21-xpro
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.10-devel-565-g44440caf68
HIL Tests Version
5e18f75314
Date / Time
03.09.202200:3000:01:06.985
100%

Log


Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:31
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:20.369
INFO
Starting process: make reset
00:30:20.396
INFO
Waiting for process to complete.
00:30:22.496
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:22.504
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:22.532
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:22.716
INFO
Starting process: make reset
00:30:22.743
INFO
Waiting for process to complete.
00:30:24.870
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:24.878
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:24.909
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.075
INFO
${RESULT} = {'cmd': 'gpio_set 0 13', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.081
INFO
${RESULT} = {'cmd': 'gpio_set 0 13', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.219
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.249
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.256
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.349
INFO
${RESULT} = {'cmd': 'gpio_clear 0 13', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.358
INFO
${RESULT} = {'cmd': 'gpio_clear 0 13', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.499
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.529
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.536
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:25.639
INFO
Starting process: make reset
00:30:25.665
INFO
Waiting for process to complete.
00:30:27.752
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:27.760
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:27.791
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:27.968
INFO
${RESULT} = {'cmd': 'gpio_set 0 28', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:27.974
INFO
${RESULT} = {'cmd': 'gpio_set 0 28', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.110
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.140
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.147
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.228
INFO
${RESULT} = {'cmd': 'gpio_clear 0 28', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.234
INFO
${RESULT} = {'cmd': 'gpio_clear 0 28', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.370
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.401
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.409
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:28.512
INFO
Starting process: make reset
00:30:28.538
INFO
Waiting for process to complete.
00:30:30.645
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:30.653
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:30.685
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:30.851
INFO
${RESULT} = {'cmd': 'gpio_set 0 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:30.858
INFO
${RESULT} = {'cmd': 'gpio_set 0 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:30.993
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.026
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.033
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.113
INFO
${RESULT} = {'cmd': 'gpio_clear 0 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.121
INFO
${RESULT} = {'cmd': 'gpio_clear 0 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.257
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.287
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.294
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify if board to philip wiring is correct.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:31
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:31.897
INFO
Starting process: make reset
00:30:31.923
INFO
Waiting for process to complete.
00:30:34.002
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:34.009
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:34.039
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:34.223
INFO
Starting process: make reset
00:30:34.250
INFO
Waiting for process to complete.
00:30:36.321
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:36.329
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:36.362
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:36.499
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:36.585
INFO
Starting process: make reset
00:30:36.617
INFO
Waiting for process to complete.
00:30:38.717
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:38.724
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:38.759
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:38.894
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:38.978
INFO
Starting process: make reset
00:30:39.008
INFO
Waiting for process to complete.
00:30:41.086
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.094
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.128
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.297
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.305
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.369
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.376
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.435
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.442
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.507
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.514
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.578
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.585
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.642
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.649
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.710
INFO
${RESULT} = {'cmd': 'gpio_set 0 22', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.716
INFO
${RESULT} = {'cmd': 'gpio_set 0 22', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.853
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.884
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.890
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.972
INFO
${RESULT} = {'cmd': 'gpio_clear 0 22', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:41.979
INFO
${RESULT} = {'cmd': 'gpio_clear 0 22', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:42.115
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:42.147
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:42.154
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:42.255
INFO
Starting process: make reset
00:30:42.282
INFO
Waiting for process to complete.
00:30:44.353
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.360
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.393
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.570
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.577
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.641
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.648
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.705
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.711
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.781
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.792
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.866
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.872
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.931
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:44.938
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.005
INFO
${RESULT} = {'cmd': 'gpio_set 0 23', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.012
INFO
${RESULT} = {'cmd': 'gpio_set 0 23', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.148
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.183
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.190
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.272
INFO
${RESULT} = {'cmd': 'gpio_clear 0 23', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.278
INFO
${RESULT} = {'cmd': 'gpio_clear 0 23', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.414
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.446
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.453
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Resets the device
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:45.557
INFO
Starting process: make reset
00:30:45.584
INFO
Waiting for process to complete.
00:30:47.648
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:47.656
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
00:30:47.687
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:30 / 03.09.2022 - 00:30