Summary


Boardsaml21-xpro
Testsuitetests_xtimer_benchmarks
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:1800:03:42.096
100%

Log


Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:07.978
INFO
Starting process: make reset
00:18:07.989
INFO
Waiting for process to complete.
00:18:09.196
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.200
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.422
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Record the timer version
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.563
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.689
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.694
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.724
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.727
INFO
VALUE: xtimer
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.820
INFO
Starting process: make reset
00:18:09.831
INFO
Waiting for process to complete.
00:18:11.061
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.065
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.327
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.465
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the specified keyword multiple times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.559
INFO
Repeating keyword, round 1/20.
00:18:12.086
INFO
Repeating keyword, round 2/20.
00:18:12.607
INFO
Repeating keyword, round 3/20.
00:18:13.132
INFO
Repeating keyword, round 4/20.
00:18:13.667
INFO
Repeating keyword, round 5/20.
00:18:14.191
INFO
Repeating keyword, round 6/20.
00:18:14.737
INFO
Repeating keyword, round 7/20.
00:18:15.268
INFO
Repeating keyword, round 8/20.
00:18:15.789
INFO
Repeating keyword, round 9/20.
00:18:16.313
INFO
Repeating keyword, round 10/20.
00:18:16.840
INFO
Repeating keyword, round 11/20.
00:18:17.377
INFO
Repeating keyword, round 12/20.
00:18:17.901
INFO
Repeating keyword, round 13/20.
00:18:18.426
INFO
Repeating keyword, round 14/20.
00:18:18.951
INFO
Repeating keyword, round 15/20.
00:18:19.478
INFO
Repeating keyword, round 16/20.
00:18:20.012
INFO
Repeating keyword, round 17/20.
00:18:20.531
INFO
Repeating keyword, round 18/20.
00:18:21.053
INFO
Repeating keyword, round 19/20.
00:18:21.579
INFO
Repeating keyword, round 20/20.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.653
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.657
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.981
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018084458, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018085292, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.991
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018084458, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018085292, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.042
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.050
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.054
INFO
VALUE: [0, 8.339999999981695e-07, 0.001043444000000001, 8.329999999986959e-07, 0.0010435840000000002, 8.330000000021653e-07, 0.0010429029999999978, 8.330000000021653e-07, 0.0010429589999999996, 8.329999999986959e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010429589999999996, 8.329999999986959e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428890000000017, 8.339999999981695e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.001042750000000002, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.0010430139999999984, 8.329999999986959e-07, 0.001042750000000002, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.001042930999999997, 8.330000000056348e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010430280000000014, 8.329999999986959e-07, 0.0010437220000000039, 8.329999999986959e-07, 0.0010430839999999997, 8.329999999986959e-07, 0.0010437080000000043, 8.339999999981695e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010429310000000039, 8.329999999986959e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428889999999982, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010429300000000044, 8.329999999986959e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010429580000000035, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010430280000000014, 8.329999999986959e-07, 0.0010437640000000026, 8.329999999986959e-07, 0.0010427780000000011, 8.329999999986959e-07, 0.0010428890000000052, 8.479999999977395e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429450000000035, 8.329999999986959e-07, 0.0010430140000000018, 8.329999999986959e-07, 0.0010428469999999926, 8.340000000051084e-07, 0.0010430000000000023, 8.32999999991757e-07, 0.0010428190000000004, 8.340000000051084e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428749999999987, 8.32999999991757e-07, 0.0010429450000000035, 8.330000000056348e-07, 0.0010427920000000007, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.180
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.184
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.502
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017810153, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017810986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.512
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017810153, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017810986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.563
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.571
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.575
INFO
VALUE: [0, 8.330000000021653e-07, 0.001043638999999999, 8.329999999986959e-07, 0.0010436109999999998, 8.34000000001639e-07, 0.001042860999999999, 8.330000000021653e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010429020000000018, 8.339999999981695e-07, 0.0010429720000000031, 8.329999999986959e-07, 0.0010436810000000012, 8.329999999986959e-07, 0.001042860999999999, 8.34000000001639e-07, 0.0010428889999999982, 8.330000000021653e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010429170000000008, 8.330000000021653e-07, 0.0010429029999999978, 8.470000000017353e-07, 0.0010428059999999968, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428890000000052, 8.339999999981695e-07, 0.001042915999999998, 8.340000000051084e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429030000000047, 8.329999999986959e-07, 0.0010430560000000005, 8.329999999986959e-07, 0.0010436809999999977, 8.330000000056348e-07, 0.0010429449999999965, 8.329999999986959e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010430410000000015, 8.339999999981695e-07, 0.0010437080000000043, 8.329999999986959e-07, 0.001042959000000003, 8.329999999986959e-07, 0.0010430140000000018, 8.329999999986959e-07, 0.0010437779999999952, 8.330000000056348e-07, 0.0010430279999999945, 8.330000000056348e-07, 0.001043749999999996, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010430140000000018, 8.329999999986959e-07, 0.001043638999999999, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010430830000000002, 8.340000000051084e-07, 0.0010439579999999976, 8.329999999986959e-07, 0.001043638999999999, 8.340000000051084e-07, 0.001042833, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010429160000000048, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010430560000000005, 8.32999999991757e-07, 0.0010436939999999978, 8.340000000051084e-07, 0.001042749999999995, 8.330000000056348e-07, 0.0010429029999999978, 8.330000000056348e-07, 0.0010430560000000005, 8.32999999991757e-07, 0.001043778000000009, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.702
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.706
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.026
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018501583, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018502597, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.036
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018501583, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018502597, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.087
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.095
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.099
INFO
VALUE: [0, 1.01400000000057e-06, 0.0010431950000000002, 8.330000000021653e-07, 0.001043736, 8.329999999986959e-07, 0.0010429170000000008, 8.329999999986959e-07, 0.0010429729999999991, 8.330000000021653e-07, 0.0010429999999999988, 8.329999999986959e-07, 0.0010428199999999999, 8.330000000021653e-07, 0.001042958, 8.339999999981695e-07, 0.001042930000000001, 8.34000000001639e-07, 0.001042833, 8.329999999986959e-07, 0.0010429859999999992, 8.34000000001639e-07, 0.0010437220000000004, 8.329999999986959e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.0010429579999999966, 8.330000000056348e-07, 0.001042930999999997, 8.329999999986959e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010428190000000004, 8.340000000051084e-07, 0.001042915999999998, 8.339999999981695e-07, 0.0010430140000000018, 8.469999999982658e-07, 0.0010436249999999994, 8.330000000056348e-07, 0.0010430139999999949, 8.329999999986959e-07, 0.001043750000000003, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010430979999999992, 8.329999999986959e-07, 0.0010437079999999974, 8.339999999981695e-07, 0.0010428470000000065, 8.329999999986959e-07, 0.0010428889999999982, 8.469999999982658e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042943999999997, 8.329999999986959e-07, 0.0010427640000000016, 8.339999999981695e-07, 0.0010429860000000027, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010427910000000012, 8.340000000051084e-07, 0.0010430689999999937, 8.330000000056348e-07, 0.0010437229999999964, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.0010430000000000023, 8.329999999986959e-07, 0.0010427089999999958, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.001043042000000001, 8.329999999986959e-07, 0.0010438060000000013, 8.329999999986959e-07, 0.001042943999999997, 8.340000000051084e-07, 0.0010436799999999982, 8.479999999977395e-07, 0.0010430270000000089, 8.339999999912306e-07, 0.0010437910000000022, 8.340000000051084e-07, 0.0010429019999999983, 8.339999999912306e-07, 0.001042861000000006, 8.330000000056348e-07, 0.0010427639999999877, 8.330000000056348e-07, 0.0010429170000000043, 8.32999999991757e-07, 0.0010428890000000052, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.234
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.237
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.557
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.024927792, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.024928625, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.568
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.024927792, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.024928625, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.622
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.630
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.634
INFO
VALUE: [0, 8.329999999986959e-07, 0.0010431109999999993, 8.330000000021653e-07, 0.0010437639999999991, 8.34000000001639e-07, 0.0010429299999999975, 8.34000000001639e-07, 0.001042930000000001, 8.329999999986959e-07, 0.001043027999999998, 8.34000000001639e-07, 0.0010437080000000008, 8.329999999986959e-07, 0.0010429589999999996, 8.329999999986959e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428889999999982, 8.339999999981695e-07, 0.0010429299999999975, 8.340000000051084e-07, 0.0010429999999999953, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010431809999999972, 8.330000000056348e-07, 0.0010435970000000003, 8.339999999981695e-07, 0.0010427770000000017, 8.339999999981695e-07, 0.001042943999999997, 8.329999999986959e-07, 0.0010428620000000055, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010427769999999947, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429580000000035, 8.339999999981695e-07, 0.0010429019999999983, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428339999999994, 8.330000000056348e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042930999999997, 8.329999999986959e-07, 0.001042959000000003, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010438340000000004, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.0010429029999999978, 8.330000000056348e-07, 0.0010430279999999945, 8.330000000056348e-07, 0.0010436939999999978, 8.340000000051084e-07, 0.0010428190000000004, 8.339999999912306e-07, 0.001042861000000006, 8.32999999991757e-07, 0.001043042000000008, 8.32999999991757e-07, 0.001043861000000007, 8.32999999991757e-07, 0.0010436250000000064, 8.340000000051084e-07, 0.0010428749999999987, 8.32999999991757e-07, 0.0010428890000000052, 8.330000000056348e-07, 0.0010429029999999978, 8.32999999991757e-07, 0.0010428890000000052, 8.340000000051084e-07, 0.0010428609999999922, 8.330000000056348e-07, 0.0010429169999999904, 8.330000000056348e-07, 0.0010428199999999999, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.760
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.764
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.085
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018363958, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018364792, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.094
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018363958, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018364792, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.145
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.153
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.157
INFO
VALUE: [0, 8.34000000001639e-07, 0.0010434019999999988, 8.339999999981695e-07, 0.001043750000000003, 8.329999999986959e-07, 0.001042860999999999, 8.34000000001639e-07, 0.001042915999999998, 8.34000000001639e-07, 0.0010429019999999983, 8.34000000001639e-07, 0.001043040999999998, 8.34000000001639e-07, 0.001043958000000001, 8.329999999986959e-07, 0.001043736, 8.34000000001639e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042833, 8.34000000001639e-07, 0.0010429030000000013, 8.329999999986959e-07, 0.001043958000000001, 8.339999999981695e-07, 0.0010437079999999974, 8.330000000056348e-07, 0.00104307, 8.329999999986959e-07, 0.001043861, 8.329999999986959e-07, 0.0010439729999999967, 8.330000000056348e-07, 0.0010436669999999981, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010430000000000023, 8.339999999981695e-07, 0.0010436530000000055, 8.329999999986959e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428470000000065, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010429030000000047, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.001042915999999998, 8.340000000051084e-07, 0.0010427910000000012, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010429169999999974, 8.330000000056348e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.001043124999999999, 8.329999999986959e-07, 0.0010439720000000041, 8.339999999981695e-07, 0.0010437079999999974, 8.330000000056348e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010429859999999957, 8.330000000056348e-07, 0.0010437089999999968, 8.329999999986959e-07, 0.001042930999999997, 8.330000000056348e-07, 0.0010428890000000052, 8.32999999991757e-07, 0.0010431389999999985, 8.330000000056348e-07, 0.0010436949999999973, 8.330000000056348e-07, 0.0010428059999999933, 8.330000000056348e-07, 0.0010428059999999933, 8.330000000056348e-07, 0.0010428889999999913, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.297
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.302
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.630
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.023651861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.023652694, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.641
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.023651861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.023652694, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.692
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.700
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.704
INFO
VALUE: [0, 8.329999999986959e-07, 0.0010431950000000002, 8.330000000021653e-07, 0.001043861, 8.339999999981695e-07, 0.001042833, 8.330000000021653e-07, 0.001042860999999999, 8.339999999981695e-07, 0.001042847000000003, 8.329999999986959e-07, 0.001042860999999999, 8.34000000001639e-07, 0.0010427219999999994, 8.329999999986959e-07, 0.0010428890000000017, 8.339999999981695e-07, 0.0010429720000000031, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.001042833, 8.339999999981695e-07, 0.0010428469999999995, 8.469999999982658e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010427639999999946, 8.329999999986959e-07, 0.001042944000000004, 8.339999999981695e-07, 0.001042915999999998, 8.340000000051084e-07, 0.0010430139999999949, 8.330000000056348e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429860000000027, 8.339999999981695e-07, 0.0010436939999999978, 8.329999999986959e-07, 0.001042848000000006, 8.329999999986959e-07, 0.0010429719999999962, 8.340000000051084e-07, 0.0010428049999999939, 8.330000000056348e-07, 0.0010429029999999978, 8.339999999981695e-07, 0.0010429300000000044, 8.329999999986959e-07, 0.0010429449999999965, 8.329999999986959e-07, 0.0010427360000000024, 8.339999999981695e-07, 0.0010429160000000048, 8.339999999981695e-07, 0.001042915999999998, 8.340000000051084e-07, 0.001042943999999997, 8.329999999986959e-07, 0.001042737000000002, 8.329999999986959e-07, 0.0010429169999999974, 8.330000000056348e-07, 0.0010429579999999966, 8.339999999981695e-07, 0.0010427220000000029, 8.329999999986959e-07, 0.0010430000000000023, 8.329999999986959e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428750000000056, 8.32999999991757e-07, 0.0010428620000000055, 8.330000000056348e-07, 0.001042832999999993, 8.340000000051084e-07, 0.001042832999999993, 8.330000000056348e-07, 0.001042930999999997, 8.330000000056348e-07, 0.0010428749999999987, 8.32999999991757e-07, 0.0010430000000000023, 8.340000000051084e-07, 0.0010428469999999995, 8.32999999991757e-07, 0.0010429310000000108, 8.32999999991757e-07, 0.001042861000000006, 8.339999999912306e-07, 0.0010429019999999983, 8.340000000051084e-07, 0.0010429160000000048, 8.339999999912306e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.839
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.842
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.163
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.023621736, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.023622736, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.172
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.023621736, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.023622736, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.223
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.232
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.235
INFO
VALUE: [0, 9.999999999975306e-07, 0.0010436250000000029, 8.329999999986959e-07, 0.0010436950000000007, 8.329999999986959e-07, 0.0010428339999999994, 8.330000000021653e-07, 0.0010429440000000005, 8.339999999981695e-07, 0.0010429020000000018, 8.339999999981695e-07, 0.001042958, 8.329999999986959e-07, 0.0010429730000000026, 8.329999999986959e-07, 0.001042833, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.001042943999999997, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010429310000000039, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010429450000000035, 8.329999999986959e-07, 0.0010429450000000035, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010429170000000043, 8.469999999982658e-07, 0.001042943999999997, 8.340000000051084e-07, 0.0010429019999999983, 8.339999999981695e-07, 0.0010427220000000029, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010429450000000035, 8.329999999986959e-07, 0.0010428060000000003, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.001042860999999999, 8.339999999981695e-07, 0.001042943999999997, 8.330000000056348e-07, 0.001042930999999997, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428060000000003, 8.329999999986959e-07, 0.0010427640000000016, 8.329999999986959e-07, 0.0010429170000000043, 8.469999999982658e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010430280000000014, 8.329999999986959e-07, 0.0010428060000000003, 8.330000000056348e-07, 0.0010428059999999933, 8.330000000056348e-07, 0.0010429580000000035, 8.339999999912306e-07, 0.0010429299999999975, 8.340000000051084e-07, 0.0010428469999999995, 8.469999999982658e-07, 0.0010429579999999966, 8.340000000051084e-07, 0.0010429299999999975, 8.340000000051084e-07, 0.0010428190000000004, 8.32999999991757e-07, 0.0010428060000000072, 8.330000000056348e-07, 0.0010429859999999957, 8.339999999912306e-07, 0.0010429020000000122, 8.339999999912306e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428469999999995, 8.340000000051084e-07, 0.0010428749999999987, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.362
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.365
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.684
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017868097, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017869097, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.694
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017868097, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017869097, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.744
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.753
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.756
INFO
VALUE: [0, 1.000000000001e-06, 0.0010432920000000012, 8.329999999986959e-07, 0.0010437220000000004, 8.339999999981695e-07, 0.001042930000000001, 8.34000000001639e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042860999999999, 8.34000000001639e-07, 0.001042860999999999, 8.330000000021653e-07, 0.0010428889999999982, 8.330000000021653e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428610000000026, 8.329999999986959e-07, 0.0010427499999999985, 8.330000000021653e-07, 0.0010429029999999978, 8.330000000021653e-07, 0.0010429869999999987, 8.330000000021653e-07, 0.0010427640000000016, 8.329999999986959e-07, 0.0010429859999999957, 8.340000000051084e-07, 0.001042943999999997, 8.329999999986959e-07, 0.0010428060000000003, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010429449999999965, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010427640000000016, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428879999999988, 8.339999999981695e-07, 0.001042943999999997, 8.340000000051084e-07, 0.0010428050000000008, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010430410000000015, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010430280000000014, 8.329999999986959e-07, 0.0010428060000000003, 8.330000000056348e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428619999999986, 8.330000000056348e-07, 0.0010429299999999975, 8.479999999977395e-07, 0.0010428190000000004, 8.329999999986959e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042959000000003, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428060000000003, 8.330000000056348e-07, 0.0010428190000000004, 8.339999999912306e-07, 0.0010429580000000105, 8.32999999991757e-07, 0.0010427640000000016, 8.340000000051084e-07, 0.0010428469999999995, 8.32999999991757e-07, 0.0010430140000000088, 8.32999999991757e-07, 0.0010428749999999987, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.883
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.886
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.205
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017887069, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017887903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.216
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017887069, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017887903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.268
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.276
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.280
INFO
VALUE: [0, 8.34000000001639e-07, 0.0010435279999999984, 8.330000000021653e-07, 0.0010436939999999978, 8.34000000001639e-07, 0.0010429160000000014, 8.339999999981695e-07, 0.0010430410000000015, 8.339999999981695e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010429170000000008, 8.329999999986959e-07, 0.0010429719999999996, 8.34000000001639e-07, 0.0010437220000000004, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000021653e-07, 0.001042860999999999, 8.480000000012089e-07, 0.0010429719999999996, 8.329999999986959e-07, 0.0010428469999999995, 8.34000000001639e-07, 0.0010427640000000016, 8.329999999986959e-07, 0.0010430000000000023, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.001042860999999999, 8.330000000056348e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010429310000000039, 8.469999999982658e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010430130000000024, 8.339999999981695e-07, 0.0010430000000000023, 8.329999999986959e-07, 0.0010437220000000039, 8.339999999981695e-07, 0.0010427910000000012, 8.339999999981695e-07, 0.001042943999999997, 8.329999999986959e-07, 0.0010429030000000047, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010427640000000016, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010429720000000031, 8.339999999981695e-07, 0.0010427770000000017, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428750000000056, 8.469999999982658e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010429310000000039, 8.329999999986959e-07, 0.0010430000000000023, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.001042958999999996, 8.32999999991757e-07, 0.0010427360000000024, 8.340000000051084e-07, 0.0010429160000000048, 8.339999999912306e-07, 0.0010427360000000024, 8.330000000056348e-07, 0.0010429029999999978, 8.32999999991757e-07, 0.0010429720000000031, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.408
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.412
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.733
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018483875, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018484708, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.744
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018483875, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018484708, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.795
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.803
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.807
INFO
VALUE: [0, 8.329999999986959e-07, 0.001043736, 8.480000000012089e-07, 0.0010436799999999982, 8.34000000001639e-07, 0.0010429019999999983, 8.34000000001639e-07, 0.0010428469999999995, 8.330000000021653e-07, 0.0010427639999999981, 8.329999999986959e-07, 0.001042945, 8.330000000021653e-07, 0.0010427920000000007, 8.329999999986959e-07, 0.0010429310000000004, 8.329999999986959e-07, 0.0010428890000000017, 8.329999999986959e-07, 0.001042945, 8.330000000021653e-07, 0.0010428059999999968, 8.330000000021653e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010429030000000013, 8.329999999986959e-07, 0.0010429299999999975, 8.340000000051084e-07, 0.001042915999999998, 8.339999999981695e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010429310000000039, 8.329999999986959e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010429580000000035, 8.329999999986959e-07, 0.001042847999999999, 8.469999999982658e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010429030000000047, 8.329999999986959e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042943999999997, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.001042930999999997, 8.330000000056348e-07, 0.001042847999999999, 8.329999999986959e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010429719999999962, 8.329999999986959e-07, 0.0010428890000000052, 8.339999999981695e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010429300000000044, 8.339999999981695e-07, 0.001042833, 8.329999999986959e-07, 0.0010428889999999982, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.001042930999999997, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.001042930999999997, 8.330000000056348e-07, 0.0010430280000000014, 8.32999999991757e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010428889999999913, 8.330000000056348e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042832999999993, 8.330000000056348e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.933
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.936
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.257
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018154792, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018155625, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.270
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018154792, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018155625, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.332
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.341
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.344
INFO
VALUE: [0, 8.330000000021653e-07, 0.0010440139999999994, 8.329999999986959e-07, 0.0010437220000000004, 8.34000000001639e-07, 0.001042915999999998, 8.34000000001639e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.001043042000000001, 8.329999999986959e-07, 0.0010437919999999982, 8.330000000021653e-07, 0.0010428749999999987, 8.330000000021653e-07, 0.001042860999999999, 8.339999999981695e-07, 0.0010428610000000026, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000021653e-07, 0.0010428749999999987, 8.34000000001639e-07, 0.0010427499999999985, 8.329999999986959e-07, 0.0010429720000000031, 8.339999999981695e-07, 0.001042915999999998, 8.340000000051084e-07, 0.0010428879999999988, 8.339999999981695e-07, 0.0010429580000000035, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.001042749999999995, 8.330000000056348e-07, 0.001042958999999996, 8.329999999986959e-07, 0.0010429170000000043, 8.329999999986959e-07, 0.001042930999999997, 8.329999999986959e-07, 0.0010427780000000011, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010427639999999946, 8.340000000051084e-07, 0.0010431109999999993, 8.329999999986959e-07, 0.0010437359999999965, 8.340000000051084e-07, 0.0010428050000000008, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.001042959000000003, 8.329999999986959e-07, 0.0010427920000000007, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010427920000000007, 8.329999999986959e-07, 0.001042847999999999, 8.330000000056348e-07, 0.0010429719999999962, 8.329999999986959e-07, 0.001042959000000003, 8.329999999986959e-07, 0.0010428889999999982, 8.330000000056348e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010428609999999922, 8.330000000056348e-07, 0.0010428749999999987, 8.32999999991757e-07, 0.001042750000000009, 8.339999999912306e-07, 0.0010429720000000031, 8.330000000056348e-07, 0.0010429029999999978, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.470
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.474
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.794
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.01790475, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017905583, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.804
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.01790475, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017905583, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.856
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.865
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.868
INFO
VALUE: [0, 8.329999999986959e-07, 0.0010434859999999997, 8.34000000001639e-07, 0.0010437080000000008, 8.329999999986959e-07, 0.001042847999999999, 8.330000000021653e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428610000000026, 8.339999999981695e-07, 0.001042860999999999, 8.330000000021653e-07, 0.001042945, 8.329999999986959e-07, 0.0010428190000000004, 8.34000000001639e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010428610000000026, 8.339999999981695e-07, 0.001042833, 8.329999999986959e-07, 0.0010427780000000011, 8.329999999986959e-07, 0.0010429450000000035, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010428890000000052, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.001042944000000004, 8.339999999981695e-07, 0.0010430410000000015, 8.339999999981695e-07, 0.001042763000000002, 8.339999999981695e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.001042861000000006, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010428339999999994, 8.329999999986959e-07, 0.0010428060000000003, 8.329999999986959e-07, 0.0010429719999999962, 8.340000000051084e-07, 0.001042833, 8.329999999986959e-07, 0.0010429169999999974, 8.329999999986959e-07, 0.0010428750000000056, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.001042833, 8.340000000051084e-07, 0.0010427359999999955, 8.329999999986959e-07, 0.0010429030000000047, 8.329999999986959e-07, 0.001042860999999999, 8.479999999977395e-07, 0.0010429300000000044, 8.329999999986959e-07, 0.0010429029999999978, 8.339999999981695e-07, 0.0010427910000000012, 8.340000000051084e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429579999999966, 8.340000000051084e-07, 0.0010427639999999946, 8.330000000056348e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010429579999999966, 8.330000000056348e-07, 0.001042958999999996, 8.330000000056348e-07, 0.0010428749999999987, 8.330000000056348e-07, 0.0010429449999999896, 8.330000000056348e-07, 0.0010429450000000035, 8.32999999991757e-07, 0.0010428050000000078, 8.339999999912306e-07, 0.001043055000000001, 8.340000000051084e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.995
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:17.998
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:18.319
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018126278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018127111, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:18.330
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018126278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018127111, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:18.381
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:18.389
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:18.393
INFO
VALUE: [0, 8.330000000021653e-07, 0.001043347, 8.339999999981695e-07, 0.0010437080000000008, 8.329999999986959e-07, 0.0010429170000000008, 8.329999999986959e-07, 0.0010427920000000007, 8.330000000021653e-07, 0.0010428749999999987, 8.339999999981695e-07, 0.0010429440000000005, 8.330000000021653e-07, 0.0010428619999999986, 8.330000000021653e-07, 0.0010428749999999987, 8.329999999986959e-07, 0.0010428060000000003, 8.330000000021653e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010428750000000021, 8.339999999981695e-07, 0.0010428750000000021, 8.329999999986959e-07, 0.0010428060000000038, 8.329999999986959e-07, 0.0010428889999999982, 8.329999999986959e-07, 0.0010430140000000018, 8.329999999986959e-07, 0.0010428199999999999, 8.469999999982658e-07, 0.0010428750000000056, 8.329999999986959e-07, 0.0010429029999999978, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.001042943999999997, 8.339999999981695e-07, 0.0010427770000000017, 8.339999999981695e-07, 0.0010429860000000027, 8.329999999986959e-07, 0.001042860999999999, 8.340000000051084e-07, 0.001042915999999998, 8.339999999981695e-07, 0.0010429860000000027, 8.329999999986959e-07, 0.0010428469999999995, 8.339999999981695e-07, 0.0010428879999999988, 8.340000000051084e-07, 0.0010428190000000004, 8.339999999981695e-07, 0.0010428190000000004, 8.329999999986959e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010429999999999953, 8.329999999986959e-07, 0.0010429310000000039, 8.329999999986959e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010429030000000047, 8.339999999981695e-07, 0.0010428469999999995, 8.329999999986959e-07, 0.0010428199999999999, 8.329999999986959e-07, 0.0010428469999999995, 8.330000000056348e-07, 0.0010429029999999978, 8.339999999981695e-07, 0.001042860999999999, 8.329999999986959e-07, 0.0010429720000000031, 8.339999999981695e-07, 0.0010428879999999988, 8.340000000051084e-07, 0.001042833, 8.329999999986959e-07, 0.0010427919999999938, 8.330000000056348e-07, 0.0010428749999999987, 8.340000000051084e-07, 0.0010427779999999942, 8.330000000056348e-07, 0.0010429299999999975, 8.340000000051084e-07, 0.0010429029999999978, 8.32999999991757e-07, 0.0010428890000000052, 8.330000000056348e-07, 0.0010428199999999999, 8.32999999991757e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:18.520
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:18.523
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}