Summary


Boardsaml21-xpro
Testsuitetests_periph_uart
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:2200:01:16.922
100%

Log


Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests
Documentation: Verify basic functionality of the periph UART API.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/01__periph_uart_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:18.825
INFO
Starting process: make reset
00:22:18.836
INFO
Waiting for process to complete.
00:22:20.037
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:20.041
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:20.060
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write short string to UART and verify echo reply.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:22.513
INFO
Starting process: make reset
00:22:22.525
INFO
Waiting for process to complete.
00:22:23.724
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:23.728
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:23.750
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.198
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.201
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.491
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.495
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.557
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.561
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.670
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.617
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:22:26.617
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.635
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:26.635
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:26.636
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:26.636
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.673
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Write long string to UART and verify echo reply.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:26.711
INFO
Starting process: make reset
00:22:26.722
INFO
Waiting for process to complete.
00:22:27.954
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:27.958
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:27.980
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.412
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.415
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.705
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.708
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.789
INFO
${RESULT} = {'cmd': 'uart_write 1 t989551163259834543514502553775645147039715', 'data': ['t989551163259834543514502553775645147039715'], 'msg': '> UART_DEV(1) RX: [t989551163259834543514502553775645147039715]\\n'...
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.793
INFO
${RESULT} = {'cmd': 'uart_write 1 t989551163259834543514502553775645147039715', 'data': ['t989551163259834543514502553775645147039715'], 'msg': '> UART_DEV(1) RX: [t989551163259834543514502553775645147039715]\\n'...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.912
INFO
${stats} = RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.848
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 56, 'result': 'Success'}
00:22:30.848
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 56, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.866
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:30.866
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:30.867
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:30.867
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.914
INFO
RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify echo of short string to UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:30.952
INFO
Starting process: make reset
00:22:30.963
INFO
Waiting for process to complete.
00:22:32.241
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:32.245
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:32.267
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:34.728
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:34.730
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.020
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.024
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.086
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['u222'], 'msg': '> UART_DEV(1) RX: [u222]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.091
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['u222'], 'msg': '> UART_DEV(1) RX: [u222]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.209
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.152
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:22:35.152
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.174
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:35.175
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:35.175
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:35.175
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.212
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify echo of long string to UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:35.250
INFO
Starting process: make reset
00:22:35.261
INFO
Waiting for process to complete.
00:22:36.477
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:36.481
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:36.502
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:38.934
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:38.937
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.226
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.230
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.311
INFO
${RESULT} = {'cmd': 'uart_write 1 t989551163259834543514502553775645147039715', 'data': ['u:9:66227436:94565462561366488675625814:826'], 'msg': '> UART_DEV(1) RX: [u:9:66227436:94565462561366488675625814:826]\\n'...
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.314
INFO
${RESULT} = {'cmd': 'uart_write 1 t989551163259834543514502553775645147039715', 'data': ['u:9:66227436:94565462561366488675625814:826'], 'msg': '> UART_DEV(1) RX: [u:9:66227436:94565462561366488675625814:826]\\n'...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.422
INFO
${stats} = RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.370
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 56, 'result': 'Success'}
00:22:39.370
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 56, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.388
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:39.388
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:39.389
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:39.389
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.424
INFO
RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify access of user register via UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:39.462
INFO
Starting process: make reset
00:22:39.473
INFO
Waiting for process to complete.
00:22:40.752
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:40.756
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:40.776
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.221
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.224
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.515
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.519
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.591
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr 0 10"', 'data': ['{"data":[0,1,2,3,4,5,6,7,8,9'], 'msg': '> UART_DEV(1) RX: [{"data":[0,1,2,3,4,5,6,7,8,9], "result":0}]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.595
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr 0 10"', 'data': ['{"data":[0,1,2,3,4,5,6,7,8,9'], 'msg': '> UART_DEV(1) RX: [{"data":[0,1,2,3,4,5,6,7,8,9], "result":0}]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.695
INFO
${stats} = RX: 20, TX: 73, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.641
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 20, 'result': 'Success'}
00:22:43.641
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 73, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.659
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:43.659
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:43.659
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:43.660
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.697
INFO
RX: 20, TX: 73, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verfiy access of invalid register via UART fails.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:43.736
INFO
Starting process: make reset
00:22:43.746
INFO
Waiting for process to complete.
00:22:45.001
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:45.005
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:45.026
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.472
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.475
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.766
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.770
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.836
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr -1 10"', 'data': ['{"result":22}'], 'msg': '> UART_DEV(1) RX: [{"result":22}]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.840
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr -1 10"', 'data': ['{"result":22}'], 'msg': '> UART_DEV(1) RX: [{"result":22}]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.934
INFO
${stats} = RX: 21, TX: 44, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.883
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 21, 'result': 'Success'}
00:22:47.883
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 44, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.900
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:47.901
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:47.901
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:47.901
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.937
INFO
RX: 21, TX: 44, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write with baudrate 9600.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:47.976
INFO
Starting process: make reset
00:22:47.987
INFO
Waiting for process to complete.
00:22:49.213
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:49.218
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:49.239
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:51.673
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:51.676
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:51.982
INFO
${RESULT} = {'cmd': 'uart_init 1 9600', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 9600', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:51.985
INFO
${RESULT} = {'cmd': 'uart_init 1 9600', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 9600', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:52.068
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:52.071
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:52.178
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:52.126
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:22:52.126
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:52.144
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:52.145
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:52.145
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:52.145
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:52.181
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write with baudrate 38400.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:52.260
INFO
Starting process: make reset
00:22:52.271
INFO
Waiting for process to complete.
00:22:53.466
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:53.471
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:53.492
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:55.925
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 422 0 150 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:55.927
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 422 0 150 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.224
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.227
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.292
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.296
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.403
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.351
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:22:56.351
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.369
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:56.369
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:56.370
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:22:56.370
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.405
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write fails when baudrates do not match.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.443
INFO
Starting process: make reset
00:22:56.454
INFO
Waiting for process to complete.
00:22:57.682
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:57.687
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:57.707
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:00.151
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:00.153
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:02.451
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:02.458
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.555
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': None, 'result': 'Timeout'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.561
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.679
INFO
${stats} = RX: 0, TX: 0, PE: 0, FE: 1, NF: 1, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.624
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 0, 'result': 'Success'}
00:23:06.625
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 0, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.645
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:06.645
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 1, 'result': 'Success'}
00:23:06.645
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 1, 'result': 'Success'}
00:23:06.646
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.682
INFO
RX: 0, TX: 0, PE: 0, FE: 1, NF: 1, ORE: 0
Documentation: Verify mode config functionality of the periph UART API.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/02__periph_uart_mode.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:07.001
INFO
Starting process: make reset
00:23:07.012
INFO
Waiting for process to complete.
00:23:08.207
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:08.211
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:08.230
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Verify UART mode with 8 data bits and even parity.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.679
INFO
Starting process: make reset
00:23:10.690
INFO
Waiting for process to complete.
00:23:11.909
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:11.914
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:11.934
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Verify DUT supports UART mode configuration
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.456
INFO
${status} = FAIL
00:23:15.457
INFO
${value} = Uart Mode expected Success but received Timeout
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.390
INFO
${RESULT} = {'cmd': 'uart_mode 1 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Setup databits, parity and stopbits.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23