Summary


Boardsaml21-xpro
Testsuitetests_periph_i2c
Status
FAIL
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:2500:00:34.510
88%

Log


Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests
Documentation: Verify basic functionality of the periph I2C API.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/01__periph_i2c_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Resets the device
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:53.534
INFO
Starting process: make reset
00:25:53.545
INFO
Waiting for process to complete.
00:25:54.752
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:54.756
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:54.772
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Verify I2C acquire and release API calls.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Resets the device
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:54.921
INFO
Starting process: make reset
00:25:54.937
INFO
Waiting for process to complete.
00:25:56.158
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:56.162
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:56.179
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:56.292
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:56.296
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:56.335
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:56.339
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Verify acquiring an I2C bus after release.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Resets the device
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:56.402
INFO
Starting process: make reset
00:25:56.417
INFO
Waiting for process to complete.
00:25:57.689
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.693
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.710
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.816
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.820
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.854
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.858
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.894
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.898
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Verify that acquiring a locked I2C bus blocks.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Resets the device
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:57.951
INFO
Starting process: make reset
00:25:57.962
INFO
Waiting for process to complete.
00:25:59.219
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:59.223
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:59.240
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:59.344
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
00:25:59.348
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:25
Documentation: Fails if the given API ``call`` does not timeout.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:26
00:26:00.385
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:25 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:00.391
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify recovery of I2C bus after NACK.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:00.467
INFO
Starting process: make reset
00:26:00.479
INFO
Waiting for process to complete.
00:26:01.690
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.694
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.711
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.820
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.823
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.862
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.865
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.910
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Read byte from register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.915
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.967
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:01.973
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify recovery of read bytes NACK.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:02.030
INFO
Starting process: make reset
00:26:02.041
INFO
Waiting for process to complete.
00:26:03.243
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.247
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.264
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.375
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.379
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.417
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.422
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.469
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.473
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.522
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Read byte from the I2C device.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.525
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.561
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.565
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify pins are high after release.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:03.636
INFO
Starting process: make reset
00:26:03.647
INFO
Waiting for process to complete.
00:26:04.851
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:04.855
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:04.871
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:04.999
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.004
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.050
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.053
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.087
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.091
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.132
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_scl.level,0,1)', ['read_bits(323,5,1)', 'rr 323 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.135
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_scl.level,0,1)', ['read_bits(323,5,1)', 'rr 323 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Data driven tests to verify the i2c_write_regs call.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/02__periph_i2c_write_register.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:05.499
INFO
Starting process: make reset
00:26:05.510
INFO
Waiting for process to complete.
00:26:06.760
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:06.764
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:06.782
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:06.912
INFO
Starting process: make reset
00:26:06.922
INFO
Waiting for process to complete.
00:26:08.125
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:08.130
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:08.150
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify bytes are written to a register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:08.305
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:08.309
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:08.346
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:08.350
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:08.422
INFO
Starting process: make reset
00:26:08.433
INFO
Waiting for process to complete.
00:26:09.657
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:09.661
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:09.679
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify bytes are written to a register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:09.815
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:09.820
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:09.872
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:09.877
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:09.959
INFO
Starting process: make reset
00:26:09.970
INFO
Waiting for process to complete.
00:26:11.180
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:11.184
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:11.202
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify bytes are written to a register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:11.342
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:11.346
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:11.393
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:11.400
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Tests to verify correct error codes are given.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/03__periph_i2c_error_codes.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:11.735
INFO
Starting process: make reset
00:26:11.745
INFO
Waiting for process to complete.
00:26:12.973
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:12.979
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:12.998
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify address NACK (ENXIO) occurs
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:13.136
INFO
Starting process: make reset
00:26:13.147
INFO
Waiting for process to complete.
00:26:14.346
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:14.350
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:14.367
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:14.484
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:14.489
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ${msg} is not in the last API message
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify data NACK (EIO) occurs
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:14.583
INFO
Starting process: make reset
00:26:14.594
INFO
Waiting for process to complete.
00:26:15.806
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:15.810
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:15.826
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Get access to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:15.961
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:15.964
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ${msg} is not in the last API message
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Release to the I2C bus.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Tests split frame i2c flags.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/04__periph_i2c_flags.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:16.324
INFO
Starting process: make reset
00:26:16.335
INFO
Waiting for process to complete.
00:26:17.565
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:17.569
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:17.586
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify DUT does not lockup if read_byte with NOSTOP
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:17.748
INFO
Starting process: make reset
00:26:17.760
INFO
Waiting for process to complete.
00:26:19.126
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:19.130
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:19.149
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26