Summary


Boardsaml21-xpro
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:2600:00:43.265
100%

Log


Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.897
INFO
Starting process: make reset
00:26:40.908
INFO
Waiting for process to complete.
00:26:42.142
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.146
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.162
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.290
INFO
Starting process: make reset
00:26:42.302
INFO
Waiting for process to complete.
00:26:43.569
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.574
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.591
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.711
INFO
${RESULT} = {'cmd': 'gpio_set 0 20', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.715
INFO
${RESULT} = {'cmd': 'gpio_set 0 20', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.834
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.855
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.861
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.932
INFO
${RESULT} = {'cmd': 'gpio_clear 0 20', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.937
INFO
${RESULT} = {'cmd': 'gpio_clear 0 20', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.065
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.083
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.086
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.149
INFO
Starting process: make reset
00:26:44.160
INFO
Waiting for process to complete.
00:26:45.419
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.424
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.441
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.577
INFO
${RESULT} = {'cmd': 'gpio_set 1 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.581
INFO
${RESULT} = {'cmd': 'gpio_set 1 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.700
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.718
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.721
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.766
INFO
${RESULT} = {'cmd': 'gpio_clear 1 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.769
INFO
${RESULT} = {'cmd': 'gpio_clear 1 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.888
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.907
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.910
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.973
INFO
Starting process: make reset
00:26:45.984
INFO
Waiting for process to complete.
00:26:47.295
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.299
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.316
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.428
INFO
${RESULT} = {'cmd': 'gpio_set 1 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.432
INFO
${RESULT} = {'cmd': 'gpio_set 1 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.551
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.569
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.572
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.616
INFO
${RESULT} = {'cmd': 'gpio_clear 1 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.620
INFO
${RESULT} = {'cmd': 'gpio_clear 1 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.739
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.759
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.762
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:48.118
INFO
Starting process: make reset
00:26:48.129
INFO
Waiting for process to complete.
00:26:49.615
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:49.619
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:49.638
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:49.765
INFO
Starting process: make reset
00:26:49.776
INFO
Waiting for process to complete.
00:26:51.035
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.040
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.058
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.183
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.237
INFO
Starting process: make reset
00:26:51.248
INFO
Waiting for process to complete.
00:26:52.470
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.474
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.493
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.589
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.655
INFO
Starting process: make reset
00:26:52.668
INFO
Waiting for process to complete.
00:26:53.934
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.938
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.955
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.071
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.075
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.111
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.114
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.146
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.149
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.186
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.190
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.237
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.242
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.287
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.292
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.329
INFO
${RESULT} = {'cmd': 'gpio_set 1 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.333
INFO
${RESULT} = {'cmd': 'gpio_set 1 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.452
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.470
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.473
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.517
INFO
${RESULT} = {'cmd': 'gpio_clear 1 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.521
INFO
${RESULT} = {'cmd': 'gpio_clear 1 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.640
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.658
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.662
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.724
INFO
Starting process: make reset
00:26:54.735
INFO
Waiting for process to complete.
00:26:56.020
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.025
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.044
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.169
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.172
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.209
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.213
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.253
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.257
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.293
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.297
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.333
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.336
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.367
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.371
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.405
INFO
${RESULT} = {'cmd': 'gpio_set 1 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.408
INFO
${RESULT} = {'cmd': 'gpio_set 1 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.527
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.545
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.548
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.593
INFO
${RESULT} = {'cmd': 'gpio_clear 1 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.597
INFO
${RESULT} = {'cmd': 'gpio_clear 1 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.716
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.742
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.748
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:56.839
INFO
Starting process: make reset
00:26:56.850
INFO
Waiting for process to complete.
00:26:58.078
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:58.082
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:58.102
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26