Summary


Boardsaml11-xpro
Testsuitetests_periph_i2c
Status
FAIL
RIOT Version
2023.01-devel-592-g154b1d6397
HIL Tests Version
5e18f75314
Date / Time
07.12.202223:2200:00:34.608
88%

Log


Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests
Documentation: Verify basic functionality of the periph I2C API.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/01__periph_i2c_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:26.401
INFO
Starting process: make reset
23:22:26.412
INFO
Waiting for process to complete.
23:22:27.688
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.692
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.708
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify I2C acquire and release API calls.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.817
INFO
Starting process: make reset
23:22:27.828
INFO
Waiting for process to complete.
23:22:29.130
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.134
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.153
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.240
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.243
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.280
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.283
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify acquiring an I2C bus after release.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.337
INFO
Starting process: make reset
23:22:29.348
INFO
Waiting for process to complete.
23:22:30.617
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.621
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.638
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.725
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.729
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.766
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.769
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.805
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.809
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify that acquiring a locked I2C bus blocks.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.861
INFO
Starting process: make reset
23:22:30.871
INFO
Waiting for process to complete.
23:22:32.132
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.136
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.153
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.241
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.245
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:33.283
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:33.287
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify recovery of I2C bus after NACK.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:33.352
INFO
Starting process: make reset
23:22:33.367
INFO
Waiting for process to complete.
23:22:34.653
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.657
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.677
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.765
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.768
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.807
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.811
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.853
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Read byte from register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.857
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.893
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.896
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify recovery of read bytes NACK.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.949
INFO
Starting process: make reset
23:22:34.960
INFO
Waiting for process to complete.
23:22:36.218
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.223
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.242
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.329
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.333
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.372
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.376
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.414
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.417
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.458
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Read byte from the I2C device.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.461
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.499
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.503
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify pins are high after release.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:36.554
INFO
Starting process: make reset
23:22:36.564
INFO
Waiting for process to complete.
23:22:37.807
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.811
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.828
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.923
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.926
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.962
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.967
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:38.013
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:38.018
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:38.075
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_scl.level,0,1)', ['read_bits(323,5,1)', 'rr 323 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:38.078
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_scl.level,0,1)', ['read_bits(323,5,1)', 'rr 323 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Data driven tests to verify the i2c_write_regs call.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/02__periph_i2c_write_register.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:38.440
INFO
Starting process: make reset
23:22:38.451
INFO
Waiting for process to complete.
23:22:39.698
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.702
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.719
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.832
INFO
Starting process: make reset
23:22:39.843
INFO
Waiting for process to complete.
23:22:41.144
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.150
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.181
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify bytes are written to a register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.305
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.308
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.343
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.347
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.423
INFO
Starting process: make reset
23:22:41.434
INFO
Waiting for process to complete.
23:22:42.694
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:42.699
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:42.717
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify bytes are written to a register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:42.847
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:42.851
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:42.886
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:42.890
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:42.966
INFO
Starting process: make reset
23:22:42.977
INFO
Waiting for process to complete.
23:22:44.250
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:44.254
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:44.272
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify bytes are written to a register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:44.404
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:44.409
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:44.455
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:44.459
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Tests to verify correct error codes are given.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/03__periph_i2c_error_codes.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:44.785
INFO
Starting process: make reset
23:22:44.795
INFO
Waiting for process to complete.
23:22:46.046
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:46.051
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:46.066
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify address NACK (ENXIO) occurs
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:46.176
INFO
Starting process: make reset
23:22:46.186
INFO
Waiting for process to complete.
23:22:47.452
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:47.456
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:47.473
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:47.593
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:47.596
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ${msg} is not in the last API message
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify data NACK (EIO) occurs
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:47.672
INFO
Starting process: make reset
23:22:47.682
INFO
Waiting for process to complete.
23:22:48.933
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:48.937
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:48.954
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:49.078
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:49.082
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ${msg} is not in the last API message
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Release to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Tests split frame i2c flags.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/04__periph_i2c_flags.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:49.418
INFO
Starting process: make reset
23:22:49.428
INFO
Waiting for process to complete.
23:22:50.685
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:50.690
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:50.710
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify DUT does not lockup if read_byte with NOSTOP
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:50.830
INFO
Starting process: make reset
23:22:50.841
INFO
Waiting for process to complete.
23:22:52.075
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:52.079
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:52.098
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Get access to the I2C bus.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22