Summary


Boardsaml11-xpro
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.07-devel-898-gd9fc082686
HIL Tests Version
8fe8d2d38b
Date / Time
28.06.202200:2500:00:40.416
100%

Log


Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:37.167
INFO
Starting process: make reset
00:25:37.177
INFO
Waiting for process to complete.
00:25:38.376
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:38.380
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:38.393
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:38.506
INFO
Starting process: make reset
00:25:38.516
INFO
Waiting for process to complete.
00:25:39.689
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.693
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.709
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.792
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.795
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.912
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.936
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.941
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:39.999
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:40.002
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:40.119
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:40.134
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:40.137
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:40.195
INFO
Starting process: make reset
00:25:40.204
INFO
Waiting for process to complete.
00:25:41.382
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.386
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.400
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.484
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.487
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.604
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.637
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.644
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.719
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.722
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.839
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.857
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.860
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:41.922
INFO
Starting process: make reset
00:25:41.932
INFO
Waiting for process to complete.
00:25:43.125
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.129
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.144
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.228
INFO
${RESULT} = {'cmd': 'gpio_set 0 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.231
INFO
${RESULT} = {'cmd': 'gpio_set 0 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.358
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.383
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.388
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.452
INFO
${RESULT} = {'cmd': 'gpio_clear 0 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.457
INFO
${RESULT} = {'cmd': 'gpio_clear 0 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.577
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.593
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.597
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:43.920
INFO
Starting process: make reset
00:25:43.930
INFO
Waiting for process to complete.
00:25:45.115
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:45.119
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:45.133
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:45.234
INFO
Starting process: make reset
00:25:45.243
INFO
Waiting for process to complete.
00:25:46.449
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:46.453
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:46.468
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:46.572
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:46.632
INFO
Starting process: make reset
00:25:46.643
INFO
Waiting for process to complete.
00:25:47.798
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:47.803
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:47.820
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:47.886
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:47.938
INFO
Starting process: make reset
00:25:47.947
INFO
Waiting for process to complete.
00:25:49.167
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.170
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.185
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.269
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.272
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.306
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.310
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.338
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.341
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.374
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.377
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.409
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.413
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.440
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.443
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.475
INFO
${RESULT} = {'cmd': 'gpio_set 0 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.478
INFO
${RESULT} = {'cmd': 'gpio_set 0 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.594
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.610
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.613
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.656
INFO
${RESULT} = {'cmd': 'gpio_clear 0 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.660
INFO
${RESULT} = {'cmd': 'gpio_clear 0 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.776
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.793
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.796
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:49.853
INFO
Starting process: make reset
00:25:49.863
INFO
Waiting for process to complete.
00:25:51.066
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.070
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.086
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.178
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.183
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.233
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.238
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.274
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.277
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.310
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.313
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.345
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.349
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.376
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.379
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.409
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.413
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.529
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.545
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.548
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.590
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.593
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.709
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.733
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.736
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Resets the device
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:51.793
INFO
Starting process: make reset
00:25:51.803
INFO
Waiting for process to complete.
00:25:52.979
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:52.983
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
00:25:52.998
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:25 / 28.06.2022 - 00:25