Summary


Boardsaml10-xpro
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.04-devel-92-g2520b5c608
HIL Tests Version
8fe8d2d38b
Date / Time
22.01.202223:2200:00:38.565
100%

Log


Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:32.186
INFO
Starting process: make reset
23:22:32.197
INFO
Waiting for process to complete.
23:22:33.371
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:33.375
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:33.389
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:33.496
INFO
Starting process: make reset
23:22:33.507
INFO
Waiting for process to complete.
23:22:34.701
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:34.706
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:34.723
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:34.832
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:34.838
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:34.966
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:34.982
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:34.985
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:35.026
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:35.029
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:35.146
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:35.162
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:35.165
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:35.224
INFO
Starting process: make reset
23:22:35.234
INFO
Waiting for process to complete.
23:22:36.435
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.440
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.460
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.552
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.555
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.671
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.687
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.691
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.730
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.733
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.849
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.866
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.869
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:36.927
INFO
Starting process: make reset
23:22:36.937
INFO
Waiting for process to complete.
23:22:38.119
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.123
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.138
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.230
INFO
${RESULT} = {'cmd': 'gpio_set 0 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.233
INFO
${RESULT} = {'cmd': 'gpio_set 0 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.354
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.370
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.373
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.413
INFO
${RESULT} = {'cmd': 'gpio_clear 0 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.417
INFO
${RESULT} = {'cmd': 'gpio_clear 0 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.533
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.549
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.552
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:38.912
INFO
Starting process: make reset
23:22:38.922
INFO
Waiting for process to complete.
23:22:40.119
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:40.122
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:40.135
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:40.244
INFO
Starting process: make reset
23:22:40.253
INFO
Waiting for process to complete.
23:22:41.440
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:41.443
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:41.458
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:41.527
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:41.577
INFO
Starting process: make reset
23:22:41.588
INFO
Waiting for process to complete.
23:22:42.815
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:42.820
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:42.840
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:42.914
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:42.965
INFO
Starting process: make reset
23:22:42.975
INFO
Waiting for process to complete.
23:22:44.129
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:44.133
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:44.151
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:44.226
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:44.276
INFO
Starting process: make reset
23:22:44.286
INFO
Waiting for process to complete.
23:22:45.473
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:45.477
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:45.492
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:45.558
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:45.612
INFO
Starting process: make reset
23:22:45.622
INFO
Waiting for process to complete.
23:22:46.810
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.814
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.829
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.924
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.928
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.964
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.967
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.994
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:46.998
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.030
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.034
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.066
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.069
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.097
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.100
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.131
INFO
${RESULT} = {'cmd': 'gpio_set 0 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.135
INFO
${RESULT} = {'cmd': 'gpio_set 0 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.252
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.268
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.271
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.310
INFO
${RESULT} = {'cmd': 'gpio_clear 0 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.313
INFO
${RESULT} = {'cmd': 'gpio_clear 0 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.430
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.446
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.449
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Resets the device
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:47.507
INFO
Starting process: make reset
23:22:47.517
INFO
Waiting for process to complete.
23:22:48.695
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.698
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.715
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.799
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.802
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.835
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.838
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.871
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.876
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.927
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.933
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.976
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:22 / 22.01.2022 - 23:22
23:22:48.979
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}