Summary


Boardsame54-xpro
Testsuitetests_ztimer_benchmarks
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:1300:03:39.322
100%

Log


Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:17
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.574
INFO
Starting process: make reset
00:13:57.585
INFO
Waiting for process to complete.
00:13:58.727
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:58.731
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Resets the device
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:58.979
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Record the timer version
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Resets the device
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:59.122
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:59.233
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['ztimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:59.237
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['ztimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:59.261
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:59.265
INFO
VALUE: ztimer
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
00:13:59.347
INFO
Starting process: make reset
00:13:59.358
INFO
Waiting for process to complete.
00:14:00.491
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:00.495
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:00.766
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:00.917
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the specified keyword multiple times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.007
INFO
Repeating keyword, round 1/20.
00:14:01.531
INFO
Repeating keyword, round 2/20.
00:14:02.073
INFO
Repeating keyword, round 3/20.
00:14:02.590
INFO
Repeating keyword, round 4/20.
00:14:03.106
INFO
Repeating keyword, round 5/20.
00:14:03.629
INFO
Repeating keyword, round 6/20.
00:14:04.145
INFO
Repeating keyword, round 7/20.
00:14:04.664
INFO
Repeating keyword, round 8/20.
00:14:05.194
INFO
Repeating keyword, round 9/20.
00:14:05.713
INFO
Repeating keyword, round 10/20.
00:14:06.268
INFO
Repeating keyword, round 11/20.
00:14:06.790
INFO
Repeating keyword, round 12/20.
00:14:07.310
INFO
Repeating keyword, round 13/20.
00:14:07.830
INFO
Repeating keyword, round 14/20.
00:14:08.349
INFO
Repeating keyword, round 15/20.
00:14:08.867
INFO
Repeating keyword, round 16/20.
00:14:09.386
INFO
Repeating keyword, round 17/20.
00:14:09.905
INFO
Repeating keyword, round 18/20.
00:14:10.422
INFO
Repeating keyword, round 19/20.
00:14:10.948
INFO
Repeating keyword, round 20/20.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.098
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.101
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.427
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017881097, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017881264, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.437
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017881097, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017881264, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.487
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.496
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.499
INFO
VALUE: [0, 1.670000000023042e-07, 0.0010119859999999994, 2.220000000011102e-07, 0.0010093469999999972, 1.810000000018741e-07, 0.0010089439999999977, 1.670000000023042e-07, 0.0010099719999999979, 1.670000000023042e-07, 0.0010098469999999977, 1.810000000018741e-07, 0.001009889, 1.7999999999893102e-07, 0.0010100700000000018, 1.7999999999893102e-07, 0.0010098470000000012, 1.6699999999883475e-07, 0.0010096809999999984, 1.8000000000240046e-07, 0.001009791999999999, 1.7999999999893102e-07, 0.0010095560000000017, 1.8099999999840466e-07, 0.0010100000000000005, 1.8000000000240046e-07, 0.0010101529999999997, 1.7999999999893102e-07, 0.0010101529999999997, 1.670000000023042e-07, 0.0010095549999999953, 1.670000000023042e-07, 0.0010099719999999979, 1.670000000023042e-07, 0.001009819000000002, 1.809999999949352e-07, 0.0010099580000000052, 1.669999999953653e-07, 0.001009916999999999, 1.6600000000283055e-07, 0.0010099449999999982, 1.8000000000240046e-07, 0.0010100840000000014, 1.6599999999589166e-07, 0.001010209000000005, 1.7999999999546157e-07, 0.0010098750000000004, 1.810000000018741e-07, 0.001009889, 1.6600000000283055e-07, 0.0010099449999999982, 1.7999999999546157e-07, 0.001009917000000006, 1.809999999949352e-07, 0.001009902, 1.810000000018741e-07, 0.0010096529999999992, 1.8000000000240046e-07, 0.0010100419999999957, 1.8000000000240046e-07, 0.0010099449999999982, 1.8000000000240046e-07, 0.0010095840000000009, 1.8000000000240046e-07, 0.0010100559999999953, 1.670000000023042e-07, 0.001009902, 1.810000000018741e-07, 0.001010110999999994, 1.810000000018741e-07, 0.0010097220000000046, 1.7999999999546157e-07, 0.001009806000000002, 1.8000000000240046e-07, 0.0010100139999999966, 1.810000000018741e-07, 0.0010098610000000008, 1.809999999949352e-07, 0.0010100550000000028, 1.670000000023042e-07, 0.001009707999999998, 1.810000000018741e-07, 0.0010099579999999983, 1.810000000018741e-07, 0.001010082999999995, 1.670000000023042e-07, 0.0010103330000000021, 1.7999999999546157e-07, 0.0010101529999999997, 1.810000000018741e-07, 0.0010098050000000025, 1.810000000018741e-07, 0.0010100140000000035, 1.7999999998852267e-07, 0.001009889, 1.810000000018741e-07, 0.0010100410000000032, 1.669999999953653e-07, 0.0010096529999999992, 1.8000000000240046e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.622
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.626
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.953
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017423264, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017423444, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:01.970
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017423264, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017423444, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.028
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.037
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.040
INFO
VALUE: [0, 1.7999999999893102e-07, 0.0010119310000000006, 2.220000000011102e-07, 0.0010098469999999977, 1.810000000018741e-07, 0.001009707999999998, 1.810000000018741e-07, 0.0010099859999999974, 1.810000000018741e-07, 0.0010098189999999986, 1.810000000018741e-07, 0.0010100829999999984, 1.670000000023042e-07, 0.0010103469999999982, 1.659999999993611e-07, 0.0010099450000000017, 1.6699999999883475e-07, 0.0010099580000000018, 1.7999999999893102e-07, 0.0010097639999999998, 1.8099999999840466e-07, 0.0010098750000000004, 1.670000000023042e-07, 0.0010098329999999982, 1.7999999999893102e-07, 0.001009903000000003, 1.8099999999840466e-07, 0.0010098330000000016, 1.669999999953653e-07, 0.0010099030000000064, 1.7999999999546157e-07, 0.001009889, 1.810000000018741e-07, 0.0010099439999999987, 1.670000000023042e-07, 0.0010098750000000004, 1.7999999999546157e-07, 0.0010097090000000045, 1.7999999999546157e-07, 0.0010100420000000027, 1.8000000000240046e-07, 0.0010101809999999989, 1.7999999999546157e-07, 0.001009806000000002, 1.810000000018741e-07, 0.0010096110000000005, 1.6599999999589166e-07, 0.0010097920000000024, 1.670000000023042e-07, 0.0010097769999999964, 1.670000000023042e-07, 0.0010101669999999993, 1.8000000000240046e-07, 0.0010098199999999946, 1.6600000000283055e-07, 0.0010098750000000004, 1.670000000023042e-07, 0.0010101809999999989, 1.8000000000240046e-07, 0.0010100139999999966, 1.670000000023042e-07, 0.0010096529999999992, 1.7999999999546157e-07, 0.0010097360000000041, 1.810000000018741e-07, 0.0010099719999999979, 1.670000000023042e-07, 0.001009902, 1.809999999949352e-07, 0.0010099860000000044, 1.809999999949352e-07, 0.0010100970000000015, 1.8000000000240046e-07, 0.0010101669999999993, 0.0, 0.001009999999999997, 1.670000000023042e-07, 0.0010098050000000025, 1.809999999949352e-07, 0.0010097500000000037, 1.7999999999546157e-07, 0.001010000000000004, 1.670000000023042e-07, 0.0010099029999999995, 1.669999999953653e-07, 0.0010098880000000005, 1.670000000023042e-07, 0.0010098200000000015, 1.7999999999546157e-07, 0.0010100700000000087, 1.7999999998852267e-07, 0.001009916999999999, 1.8000000000240046e-07, 0.001009889, 1.810000000018741e-07, 0.0010099030000000064, 1.6599999999589166e-07, 0.0010097500000000037, 1.669999999953653e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.165
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.168
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.487
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017829625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017829847, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.496
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017829625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017829847, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.546
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.554
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.558
INFO
VALUE: [0, 2.2199999999764075e-07, 0.001011917000000001, 1.7999999999893102e-07, 0.0010094590000000007, 1.7999999999893102e-07, 0.0010089170000000015, 1.6699999999883475e-07, 0.0010100690000000023, 1.8099999999840466e-07, 0.0010099299999999992, 1.810000000018741e-07, 0.0010097359999999972, 1.8000000000240046e-07, 0.0010098620000000003, 1.659999999993611e-07, 0.001010111000000001, 1.6699999999883475e-07, 0.0010099029999999995, 1.7999999999893102e-07, 0.0010097639999999998, 1.810000000018741e-07, 0.001010014, 1.7999999999893102e-07, 0.001009806000000002, 1.7999999999893102e-07, 0.0010098340000000011, 1.7999999999893102e-07, 0.001009819999999998, 1.6600000000283055e-07, 0.0010099029999999995, 1.810000000018741e-07, 0.0010097769999999964, 1.810000000018741e-07, 0.0010098330000000016, 1.809999999949352e-07, 0.0010099720000000048, 1.809999999949352e-07, 0.001010083000000002, 1.810000000018741e-07, 0.001009902, 1.670000000023042e-07, 0.0010097639999999963, 1.670000000023042e-07, 0.0010100549999999958, 1.670000000023042e-07, 0.001009889, 1.6600000000283055e-07, 0.0010100419999999957, 1.810000000018741e-07, 0.0010099719999999979, 1.6600000000283055e-07, 0.0010098620000000003, 1.7999999999546157e-07, 0.001009917000000006, 1.7999999999546157e-07, 0.0010100840000000014, 1.6600000000283055e-07, 0.001009694999999998, 1.8000000000240046e-07, 0.0010098199999999946, 1.6600000000283055e-07, 0.0010099589999999978, 1.8000000000240046e-07, 0.001009889, 1.810000000018741e-07, 0.0010098189999999951, 1.810000000018741e-07, 0.0010099579999999983, 1.810000000018741e-07, 0.0010100270000000036, 1.809999999949352e-07, 0.0010099860000000044, 1.809999999949352e-07, 0.0010098750000000004, 1.6600000000283055e-07, 0.0010101250000000006, 1.810000000018741e-07, 0.0010099029999999995, 1.7999999999546157e-07, 0.0010101529999999997, 1.810000000018741e-07, 0.0010099159999999996, 1.810000000018741e-07, 0.001009777999999996, 1.8000000000240046e-07, 0.0010098610000000008, 1.810000000018741e-07, 0.0010099859999999974, 1.8000000000240046e-07, 0.0010097639999999963, 1.810000000018741e-07, 0.0010097359999999972, 1.810000000018741e-07, 0.001009930000000006, 1.8099999998799632e-07, 0.001009819000000009, 1.669999999953653e-07, 0.0010099159999999996, 1.810000000018741e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.681
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.685
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.002
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017537042, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017537208, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.012
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017537042, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017537208, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.062
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.070
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.074
INFO
VALUE: [0, 1.659999999993611e-07, 0.0010121670000000013, 2.220000000011102e-07, 0.0010098609999999973, 1.670000000023042e-07, 0.0010098189999999986, 1.810000000018741e-07, 0.0010099859999999974, 1.670000000023042e-07, 0.0010097360000000007, 1.7999999999893102e-07, 0.001009916999999999, 1.6699999999883475e-07, 0.0010099300000000026, 1.6699999999883475e-07, 0.001009889, 1.7999999999893102e-07, 0.001009931000000002, 1.8099999999840466e-07, 0.0010099720000000013, 1.7999999999893102e-07, 0.001009916999999999, 1.810000000018741e-07, 0.0010098610000000008, 1.659999999993611e-07, 0.0010099449999999982, 1.8000000000240046e-07, 0.0010098339999999977, 1.8000000000240046e-07, 0.0010098610000000008, 1.669999999953653e-07, 0.0010096940000000054, 1.809999999949352e-07, 0.0010097920000000024, 1.8000000000240046e-07, 0.0010098750000000004, 1.669999999953653e-07, 0.0010101390000000002, 1.6600000000283055e-07, 0.001009916999999999, 1.810000000018741e-07, 0.001009625, 1.6599999999589166e-07, 0.0010100420000000027, 1.810000000018741e-07, 0.001010082999999995, 1.670000000023042e-07, 0.0010101659999999998, 1.810000000018741e-07, 0.0010098189999999951, 1.670000000023042e-07, 0.0010101529999999997, 1.6600000000283055e-07, 0.001009777999999996, 1.810000000018741e-07, 0.0010098050000000025, 1.669999999953653e-07, 0.0010101390000000002, 1.8000000000240046e-07, 0.001010292000000003, 1.809999999949352e-07, 0.001010013000000004, 1.809999999949352e-07, 0.0010096110000000005, 1.810000000018741e-07, 0.001010083000000002, 1.810000000018741e-07, 0.001009790999999996, 1.810000000018741e-07, 0.001009679999999999, 1.810000000018741e-07, 0.001010111000000001, 1.809999999949352e-07, 0.0010098610000000008, 1.8000000000240046e-07, 0.0010097499999999968, 1.810000000018741e-07, 0.0010099299999999992, 1.810000000018741e-07, 0.0010099299999999992, 1.810000000018741e-07, 0.0010102079999999986, 1.810000000018741e-07, 0.0010099029999999995, 1.7999999999546157e-07, 0.0010099310000000056, 1.7999999999546157e-07, 0.0010097780000000028, 1.670000000023042e-07, 0.0010098470000000012, 1.669999999953653e-07, 0.0010099159999999996, 1.810000000018741e-07, 0.0010099580000000052, 1.8099999998799632e-07, 0.0010100970000000015, 1.810000000018741e-07, 0.0010099439999999987, 1.810000000018741e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.201
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.205
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.525
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.021878278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.0218785, 'source': 'DUT_IC', 'event': 'RISIN...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.535
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.021878278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.0218785, 'source': 'DUT_IC', 'event': 'RISIN...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.584
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.593
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.596
INFO
VALUE: [0, 2.2199999999764075e-07, 0.001011986000000003, 1.8099999999840466e-07, 0.0010094720000000008, 1.7999999999893102e-07, 0.0010099870000000004, 1.7999999999893102e-07, 0.0010095280000000026, 1.6699999999883475e-07, 0.0010098610000000008, 1.7999999999893102e-07, 0.0010100419999999992, 1.7999999999893102e-07, 0.0010097920000000024, 1.8099999999840466e-07, 0.0010099720000000013, 1.6699999999883475e-07, 0.0010096800000000024, 1.8099999999840466e-07, 0.0010098330000000016, 1.809999999949352e-07, 0.001009819000000002, 1.810000000018741e-07, 0.0010102219999999981, 1.8000000000240046e-07, 0.0010099589999999978, 1.8000000000240046e-07, 0.001009806000000002, 1.6599999999589166e-07, 0.0010099309999999986, 1.810000000018741e-07, 0.0010098880000000005, 1.810000000018741e-07, 0.0010102219999999981, 1.670000000023042e-07, 0.001009916999999999, 1.6599999999589166e-07, 0.0010101810000000058, 1.7999999999546157e-07, 0.001009889, 1.670000000023042e-07, 0.0010100279999999962, 1.6600000000283055e-07, 0.001010028000000003, 1.809999999949352e-07, 0.0010099720000000048, 1.669999999953653e-07, 0.0010098470000000012, 1.6600000000283055e-07, 0.0010096529999999992, 1.810000000018741e-07, 0.001009889, 1.7999999999546157e-07, 0.001009806000000002, 1.8000000000240046e-07, 0.0010096809999999984, 1.7999999999546157e-07, 0.001010000000000004, 1.670000000023042e-07, 0.0010100279999999962, 1.8000000000240046e-07, 0.0010097369999999967, 1.8000000000240046e-07, 0.0010099859999999974, 1.670000000023042e-07, 0.0010101669999999993, 1.6600000000283055e-07, 0.001009805999999995, 1.8000000000240046e-07, 0.0010102639999999968, 1.670000000023042e-07, 0.001009889, 1.6600000000283055e-07, 0.0010099449999999982, 1.8000000000240046e-07, 0.001009722999999997, 1.6600000000283055e-07, 0.001009694999999998, 1.6600000000283055e-07, 0.0010098479999999938, 1.8000000000240046e-07, 0.0010100840000000014, 1.8000000000240046e-07, 0.0010098199999999946, 1.6599999999589166e-07, 0.0010099720000000117, 1.669999999953653e-07, 0.0010098330000000016, 1.669999999953653e-07, 0.0010099449999999982, 1.8000000000240046e-07, 0.0010100420000000027, 1.8000000000240046e-07, 0.0010099029999999926, 1.810000000018741e-07, 0.0010100140000000035, 1.8000000000240046e-07, 0.0010098610000000008, 1.810000000018741e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.719
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.723
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.041
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017289889, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017290069, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.051
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017289889, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017290069, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.100
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.109
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.112
INFO
VALUE: [0, 1.8000000000240046e-07, 0.0010124309999999977, 2.0800000000154029e-07, 0.0010098339999999977, 1.8000000000240046e-07, 0.0010098469999999977, 1.810000000018741e-07, 0.0010100559999999988, 1.8000000000240046e-07, 0.0010097779999999994, 1.6699999999883475e-07, 0.0010099159999999996, 1.810000000018741e-07, 0.001009707999999998, 1.810000000018741e-07, 0.001010096999999998, 1.670000000023042e-07, 0.0010100549999999993, 1.8099999999840466e-07, 0.0010097909999999995, 1.810000000018741e-07, 0.0010097639999999998, 1.7999999999893102e-07, 0.0010098750000000004, 1.6699999999883475e-07, 0.0010103190000000026, 1.8099999999840466e-07, 0.0010099440000000022, 1.669999999953653e-07, 0.0010099450000000051, 1.7999999999546157e-07, 0.0010099450000000051, 1.6599999999589166e-07, 0.001009694999999998, 1.8000000000240046e-07, 0.001010000000000004, 1.809999999949352e-07, 0.001009708000000005, 1.809999999949352e-07, 0.0010096940000000054, 1.669999999953653e-07, 0.0010099719999999979, 1.810000000018741e-07, 0.0010100270000000036, 1.669999999953653e-07, 0.0010100420000000027, 1.8000000000240046e-07, 0.001009889, 1.669999999953653e-07, 0.001010083000000002, 1.810000000018741e-07, 0.0010098750000000004, 1.7999999999546157e-07, 0.0010097920000000024, 1.670000000023042e-07, 0.001009902, 1.669999999953653e-07, 0.0010101529999999997, 1.6600000000283055e-07, 0.001009889, 1.810000000018741e-07, 0.0010097219999999976, 1.670000000023042e-07, 0.001009777999999996, 1.6600000000283055e-07, 0.0010096809999999984, 1.6600000000283055e-07, 0.0010100840000000014, 1.6599999999589166e-07, 0.0010098200000000015, 1.8000000000240046e-07, 0.001009805999999995, 1.810000000018741e-07, 0.0010097219999999976, 1.8000000000240046e-07, 0.0010099309999999986, 1.8000000000240046e-07, 0.0010099449999999982, 1.8000000000240046e-07, 0.0010098200000000015, 1.7999999999546157e-07, 0.0010099730000000043, 1.6599999999589166e-07, 0.001010028000000003, 1.669999999953653e-07, 0.0010100410000000032, 1.670000000023042e-07, 0.001009916999999999, 1.7999999999546157e-07, 0.0010099449999999982, 1.8000000000240046e-07, 0.001009806000000002, 1.669999999953653e-07, 0.0010098050000000025, 1.810000000018741e-07, 0.0010099860000000044, 1.6599999999589166e-07, 0.001009916999999999, 1.669999999953653e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.236
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.240
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.559
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017579, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017579208, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.569
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017579, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017579208, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.619
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.628
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.631
INFO
VALUE: [0, 2.0799999999807084e-07, 0.0010119859999999994, 1.810000000018741e-07, 0.001009597000000001, 1.6699999999883475e-07, 0.001010014, 1.659999999993611e-07, 0.0010102090000000015, 1.659999999993611e-07, 0.0010099730000000008, 1.7999999999893102e-07, 0.0010096950000000014, 1.659999999993611e-07, 0.0010098339999999977, 1.8000000000240046e-07, 0.001010096999999998, 1.810000000018741e-07, 0.0010098610000000008, 1.8099999999840466e-07, 0.001010014, 1.7999999999893102e-07, 0.0010100279999999996, 1.8000000000240046e-07, 0.001009791999999999, 1.8099999999840466e-07, 0.0010099300000000026, 1.8099999999840466e-07, 0.0010098609999999973, 1.8000000000240046e-07, 0.0010097920000000024, 1.669999999953653e-07, 0.001009819000000002, 1.810000000018741e-07, 0.0010099029999999995, 1.8000000000240046e-07, 0.0010099449999999982, 1.6599999999589166e-07, 0.0010103060000000025, 1.6600000000283055e-07, 0.0010100559999999953, 1.810000000018741e-07, 0.0010098610000000008, 1.8000000000240046e-07, 0.001009694999999998, 1.6600000000283055e-07, 0.001009777999999996, 1.670000000023042e-07, 0.0010099579999999983, 1.810000000018741e-07, 0.0010098750000000004, 1.6599999999589166e-07, 0.0010097920000000024, 1.670000000023042e-07, 0.0010099299999999992, 1.669999999953653e-07, 0.001009930000000006, 1.809999999949352e-07, 0.0010099029999999995, 1.6600000000283055e-07, 0.0010098340000000011, 1.7999999999546157e-07, 0.0010100700000000018, 1.6600000000283055e-07, 0.0010100139999999966, 1.670000000023042e-07, 0.001009916999999999, 1.8000000000240046e-07, 0.001009999999999997, 1.810000000018741e-07, 0.001009790999999996, 1.810000000018741e-07, 0.001010111000000001, 1.670000000023042e-07, 0.0010100689999999954, 1.670000000023042e-07, 0.0010098050000000025, 1.669999999953653e-07, 0.001009708000000005, 1.809999999949352e-07, 0.001009819000000002, 1.810000000018741e-07, 0.0010100139999999966, 1.8000000000240046e-07, 0.0010099029999999995, 1.670000000023042e-07, 0.0010099859999999974, 1.810000000018741e-07, 0.0010098470000000012, 1.6599999999589166e-07, 0.001010000000000004, 1.669999999953653e-07, 0.0010100140000000035, 1.810000000018741e-07, 0.0010099859999999905, 1.8000000000240046e-07, 0.0010095280000000095, 1.8099999998799632e-07, 0.0010099159999999996, 1.810000000018741e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.756
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.760
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.090
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017798222, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017798403, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.099
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017798222, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017798403, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.149
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.158
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.161
INFO
VALUE: [0, 1.810000000018741e-07, 0.0010120139999999986, 2.220000000011102e-07, 0.001009804999999999, 1.810000000018741e-07, 0.0010097219999999976, 1.670000000023042e-07, 0.001009804999999999, 1.8099999999840466e-07, 0.0010100970000000015, 1.8099999999840466e-07, 0.0010100970000000015, 1.8099999999840466e-07, 0.001010083000000002, 1.7999999999893102e-07, 0.0010100279999999996, 1.810000000018741e-07, 0.0010099859999999974, 1.670000000023042e-07, 0.001010096999999998, 1.6600000000283055e-07, 0.0010095699999999978, 1.8000000000240046e-07, 0.0010098059999999985, 1.8099999999840466e-07, 0.0010099580000000018, 1.6699999999883475e-07, 0.0010098610000000008, 1.8000000000240046e-07, 0.0010100139999999966, 1.810000000018741e-07, 0.0010098750000000004, 1.7999999999546157e-07, 0.0010099860000000044, 1.810000000018741e-07, 0.0010097919999999955, 1.8000000000240046e-07, 0.0010098200000000015, 1.7999999999546157e-07, 0.0010097640000000033, 1.810000000018741e-07, 0.0010098750000000004, 1.7999999999546157e-07, 0.0010100420000000027, 1.6599999999589166e-07, 0.0010097780000000028, 1.810000000018741e-07, 0.0010099579999999983, 1.670000000023042e-07, 0.001009777999999996, 1.8000000000240046e-07, 0.0010100279999999962, 1.670000000023042e-07, 0.0010098880000000005, 1.670000000023042e-07, 0.0010097219999999976, 1.810000000018741e-07, 0.0010097499999999968, 1.8000000000240046e-07, 0.0010100279999999962, 1.670000000023042e-07, 0.0010099579999999983, 1.810000000018741e-07, 0.001009889, 1.8000000000240046e-07, 0.0010100699999999949, 1.8000000000240046e-07, 0.0010099309999999986, 1.8000000000240046e-07, 0.0010100700000000018, 1.6599999999589166e-07, 0.0010099310000000056, 1.669999999953653e-07, 0.0010098330000000016, 1.670000000023042e-07, 0.0010099159999999996, 1.669999999953653e-07, 0.0010096670000000058, 1.6599999999589166e-07, 0.001009806000000002, 1.669999999953653e-07, 0.0010100410000000032, 1.670000000023042e-07, 0.0010095279999999957, 1.8000000000240046e-07, 0.0010097089999999975, 1.8000000000240046e-07, 0.0010102219999999981, 1.810000000018741e-07, 0.0010098609999999938, 1.670000000092431e-07, 0.0010100690000000023, 1.669999999953653e-07, 0.0010099439999999987, 1.810000000018741e-07, 0.0010099029999999926, 1.6600000000976944e-07, 0.0010099589999999908, 1.8000000000240046e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.285
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.288
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.608
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017553306, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017553528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.617
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017553306, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017553528, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.668
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.676
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.680
INFO
VALUE: [0, 2.2199999999764075e-07, 0.0010121250000000026, 1.659999999993611e-07, 0.0010097230000000006, 1.7999999999893102e-07, 0.0010098750000000004, 1.6699999999883475e-07, 0.001009889, 1.7999999999893102e-07, 0.0010097230000000006, 1.6600000000283055e-07, 0.001009889, 1.8099999999840466e-07, 0.0010101250000000006, 1.7999999999893102e-07, 0.0010097500000000002, 1.6699999999883475e-07, 0.0010098050000000025, 1.8099999999840466e-07, 0.0010099720000000013, 1.8099999999840466e-07, 0.001010014, 1.7999999999893102e-07, 0.0010098610000000008, 1.810000000018741e-07, 0.0010101390000000002, 1.7999999999893102e-07, 0.0010099859999999974, 1.670000000023042e-07, 0.001009916999999999, 1.8000000000240046e-07, 0.0010096110000000005, 1.809999999949352e-07, 0.0010099860000000044, 1.670000000023042e-07, 0.0010099439999999987, 1.809999999949352e-07, 0.0010097780000000028, 1.6600000000283055e-07, 0.0010101529999999997, 1.809999999949352e-07, 0.0010099580000000052, 1.7999999999546157e-07, 0.001010000000000004, 1.669999999953653e-07, 0.0010101529999999997, 1.8000000000240046e-07, 0.001009999999999997, 1.810000000018741e-07, 0.0010096809999999984, 1.8000000000240046e-07, 0.0010099449999999982, 1.6600000000283055e-07, 0.0010099589999999978, 1.8000000000240046e-07, 0.001009625, 1.810000000018741e-07, 0.0010097769999999964, 1.670000000023042e-07, 0.0010099309999999986, 1.8000000000240046e-07, 0.0010099719999999979, 1.670000000023042e-07, 0.001009999999999997, 1.810000000018741e-07, 0.001009902, 1.810000000018741e-07, 0.0010098749999999934, 1.810000000018741e-07, 0.0010097630000000038, 1.809999999949352e-07, 0.0010099860000000044, 1.810000000018741e-07, 0.0010097499999999968, 1.6600000000283055e-07, 0.0010100279999999962, 1.670000000023042e-07, 0.001009999999999997, 1.8000000000240046e-07, 0.0010100700000000018, 1.7999999999546157e-07, 0.0010099029999999995, 1.810000000018741e-07, 0.001009902, 1.670000000023042e-07, 0.0010098200000000015, 1.6599999999589166e-07, 0.0010101669999999993, 1.8000000000240046e-07, 0.0010099450000000051, 1.7999999998852267e-07, 0.0010099730000000112, 1.6599999999589166e-07, 0.0010100140000000035, 1.669999999953653e-07, 0.0010097359999999972, 1.669999999953653e-07, 0.0010096660000000063, 1.669999999953653e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.806
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.809
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.129
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019543569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019543736, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.141
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019543569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019543736, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.215
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.227
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.232
INFO
VALUE: [0, 1.6699999999883475e-07, 0.001011695, 2.220000000011102e-07, 0.0010098189999999986, 1.810000000018741e-07, 0.0010098610000000008, 1.6699999999883475e-07, 0.0010099579999999983, 1.8000000000240046e-07, 0.0010097639999999998, 1.8099999999840466e-07, 0.0010100419999999992, 1.8000000000240046e-07, 0.0010100279999999996, 1.7999999999893102e-07, 0.0010099450000000017, 1.7999999999893102e-07, 0.001009791999999999, 1.670000000023042e-07, 0.001009804999999999, 1.8099999999840466e-07, 0.0010099580000000018, 1.8099999999840466e-07, 0.0010099029999999995, 1.6600000000283055e-07, 0.001009999999999997, 1.810000000018741e-07, 0.0010096659999999993, 1.810000000018741e-07, 0.0010097919999999955, 1.8000000000240046e-07, 0.001009916999999999, 1.8000000000240046e-07, 0.001009806000000002, 1.809999999949352e-07, 0.0010100410000000032, 1.810000000018741e-07, 0.0010099159999999996, 1.809999999949352e-07, 0.001010000000000004, 1.810000000018741e-07, 0.0010100269999999967, 1.810000000018741e-07, 0.0010099579999999983, 1.810000000018741e-07, 0.001009777999999996, 1.6600000000283055e-07, 0.001009889, 1.810000000018741e-07, 0.0010098470000000012, 1.7999999999546157e-07, 0.0010100140000000035, 1.669999999953653e-07, 0.0010100560000000022, 1.8000000000240046e-07, 0.001009889, 1.809999999949352e-07, 0.0010098050000000025, 1.670000000023042e-07, 0.0010098329999999947, 1.670000000023042e-07, 0.001009819000000002, 1.810000000018741e-07, 0.0010102079999999986, 1.669999999953653e-07, 0.0010099720000000048, 1.809999999949352e-07, 0.0010095830000000014, 1.8000000000240046e-07, 0.001009806000000002, 1.809999999949352e-07, 0.0010100550000000028, 1.810000000018741e-07, 0.0010100689999999954, 1.810000000018741e-07, 0.0010098610000000008, 1.8000000000240046e-07, 0.0010101529999999997, 1.669999999953653e-07, 0.0010097500000000037, 1.7999999999546157e-07, 0.0010095280000000026, 1.810000000018741e-07, 0.001009999999999997, 1.8000000000240046e-07, 0.0010099309999999986, 1.8000000000240046e-07, 0.001009583999999994, 1.8000000000240046e-07, 0.001009916999999999, 1.670000000092431e-07, 0.0010099579999999914, 1.670000000092431e-07, 0.0010099719999999979, 1.6599999999589166e-07, 0.0010097780000000028, 1.669999999953653e-07, 0.001010082999999995, 1.670000000092431e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.359
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.362
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.681
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017606042, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01760625, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.691
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017606042, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01760625, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.742
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.751
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.755
INFO
VALUE: [0, 2.0800000000154029e-07, 0.0010116530000000012, 1.659999999993611e-07, 0.0010098059999999985, 1.810000000018741e-07, 0.0010097500000000002, 1.7999999999893102e-07, 0.0010098610000000008, 1.6699999999883475e-07, 0.0010099029999999995, 1.7999999999893102e-07, 0.001010014, 1.810000000018741e-07, 0.0010101659999999998, 1.8099999999840466e-07, 0.0010098050000000025, 1.8099999999840466e-07, 0.0010098750000000004, 1.8099999999840466e-07, 0.001009916000000003, 1.6699999999883475e-07, 0.0010099299999999992, 1.6699999999883475e-07, 0.0010098610000000008, 1.670000000023042e-07, 0.0010097779999999994, 1.7999999999893102e-07, 0.0010099029999999995, 1.670000000023042e-07, 0.0010100689999999954, 1.810000000018741e-07, 0.001009902, 1.810000000018741e-07, 0.0010099579999999983, 1.670000000023042e-07, 0.001009916999999999, 1.8000000000240046e-07, 0.0010098339999999942, 1.8000000000240046e-07, 0.0010097780000000028, 1.669999999953653e-07, 0.0010096659999999993, 1.810000000018741e-07, 0.001009889, 1.8000000000240046e-07, 0.0010097359999999972, 1.670000000023042e-07, 0.001009999999999997, 1.810000000018741e-07, 0.0010102359999999977, 1.6600000000283055e-07, 0.0010101390000000002, 1.810000000018741e-07, 0.0010098470000000012, 1.809999999949352e-07, 0.0010099860000000044, 1.6599999999589166e-07, 0.001010028000000003, 1.810000000018741e-07, 0.0010101249999999937, 1.8000000000240046e-07, 0.0010099029999999995, 1.670000000023042e-07, 0.001009819000000002, 1.669999999953653e-07, 0.0010098610000000008, 1.8000000000240046e-07, 0.0010096529999999992, 1.810000000018741e-07, 0.0010099159999999996, 1.809999999949352e-07, 0.001009889, 1.8000000000240046e-07, 0.0010097499999999968, 1.670000000023042e-07, 0.0010098750000000004, 1.810000000018741e-07, 0.001010083000000002, 1.809999999949352e-07, 0.0010100970000000015, 1.8000000000240046e-07, 0.001009625, 1.809999999949352e-07, 0.0010099030000000064, 1.6599999999589166e-07, 0.0010100700000000018, 1.6599999999589166e-07, 0.0010099310000000056, 1.669999999953653e-07, 0.0010101250000000075, 1.7999999998852267e-07, 0.00101002800000001, 1.669999999953653e-07, 0.001009930000000006, 1.8099999998799632e-07, 0.0010096660000000063, 1.810000000018741e-07, 0.0010099719999999979, 1.810000000018741e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.881
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.885
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.205
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017752375, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017752542, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.215
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017752375, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017752542, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.266
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.274
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.278
INFO
VALUE: [0, 1.6699999999883475e-07, 0.0010121519999999988, 2.2300000000058384e-07, 0.0010097080000000015, 1.6699999999883475e-07, 0.0010099440000000022, 1.6699999999883475e-07, 0.0010100409999999997, 1.6699999999883475e-07, 0.001010014, 1.810000000018741e-07, 0.0010098469999999977, 1.8000000000240046e-07, 0.0010097089999999975, 1.8000000000240046e-07, 0.0010099029999999995, 1.8099999999840466e-07, 0.001009902, 1.810000000018741e-07, 0.0010098750000000004, 1.7999999999893102e-07, 0.0010099730000000008, 1.659999999993611e-07, 0.001009889, 1.8099999999840466e-07, 0.001009903000000003, 1.7999999999893102e-07, 0.0010097500000000002, 1.670000000023042e-07, 0.0010098189999999951, 1.810000000018741e-07, 0.0010100139999999966, 1.6600000000283055e-07, 0.001009916999999999, 1.810000000018741e-07, 0.001009819000000002, 1.809999999949352e-07, 0.001009791000000003, 1.670000000023042e-07, 0.0010098610000000008, 1.669999999953653e-07, 0.0010100410000000032, 1.809999999949352e-07, 0.001009930000000006, 1.669999999953653e-07, 0.0010099449999999982, 1.6600000000283055e-07, 0.0010098750000000004, 1.810000000018741e-07, 0.0010098470000000012, 1.809999999949352e-07, 0.0010094860000000039, 1.6599999999589166e-07, 0.0010099590000000047, 1.6599999999589166e-07, 0.0010099860000000044, 1.669999999953653e-07, 0.0010100420000000027, 1.6600000000283055e-07, 0.0010099309999999986, 1.669999999953653e-07, 0.0010100970000000015, 1.670000000023042e-07, 0.0010099159999999996, 1.670000000023042e-07, 0.0010098329999999947, 1.810000000018741e-07, 0.0010098330000000016, 1.810000000018741e-07, 0.0010097499999999968, 1.6600000000283055e-07, 0.0010097359999999972, 1.670000000023042e-07, 0.0010100969999999945, 1.810000000018741e-07, 0.001010083000000002, 1.810000000018741e-07, 0.001009889, 1.6599999999589166e-07, 0.0010098750000000004, 1.810000000018741e-07, 0.0010099859999999974, 1.810000000018741e-07, 0.001009902, 1.810000000018741e-07, 0.0010098750000000004, 1.7999999999546157e-07, 0.001009917000000006, 1.809999999949352e-07, 0.0010099160000000065, 1.810000000018741e-07, 0.0010098469999999943, 1.810000000018741e-07, 0.001009889, 1.8000000000240046e-07, 0.0010095829999999945, 1.810000000018741e-07, 0.0010098330000000016, 1.669999999953653e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.402
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.405
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.724
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017549681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017549903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.735
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017549681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017549903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.785
INFO
${GPIO_OVERHEAD} = {'event': ['RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING', 'RISING',...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.793
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.797
INFO
VALUE: [0, 2.2199999999764075e-07, 0.001012097, 1.810000000018741e-07, 0.001009597000000001, 1.7999999999893102e-07, 0.0010095559999999983, 1.670000000023042e-07, 0.0010096380000000002, 1.8099999999840466e-07, 0.001009916999999999, 1.8000000000240046e-07, 0.0010101669999999993, 1.7999999999893102e-07, 0.0010099590000000012, 1.7999999999893102e-07, 0.0010099029999999995, 1.810000000018741e-07, 0.0010100000000000005, 1.659999999993611e-07, 0.001010014, 1.6699999999883475e-07, 0.0010096669999999988, 1.8000000000240046e-07, 0.0010099029999999995, 1.6699999999883475e-07, 0.0010099720000000013, 1.7999999999893102e-07, 0.0010098610000000008, 1.810000000018741e-07, 0.0010096809999999984, 1.8000000000240046e-07, 0.0010099309999999986, 1.7999999999546157e-07, 0.0010101950000000054, 1.7999999999546157e-07, 0.001009889, 1.810000000018741e-07, 0.001009889, 1.6600000000283055e-07, 0.0010100699999999949, 1.8000000000240046e-07, 0.0010099859999999974, 1.670000000023042e-07, 0.0010098330000000016, 1.810000000018741e-07, 0.0010100419999999957, 1.8000000000240046e-07, 0.0010098200000000015, 1.7999999999546157e-07, 0.0010099309999999986, 1.8000000000240046e-07, 0.0010098200000000015, 1.8000000000240046e-07, 0.0010098609999999938, 1.670000000023042e-07, 0.0010097920000000024, 1.7999999999546157e-07, 0.0010097780000000028, 1.810000000018741e-07, 0.0010100970000000015, 1.6599999999589166e-07, 0.0010100700000000018, 1.8000000000240046e-07, 0.001009916999999999, 1.669999999953653e-07, 0.0010099159999999996, 1.810000000018741e-07, 0.001009819000000002, 1.810000000018741e-07, 0.0010098469999999943, 1.810000000018741e-07, 0.0010099029999999995, 1.8000000000240046e-07, 0.001009889, 1.810000000018741e-07, 0.0010100549999999958, 1.670000000023042e-07, 0.0010099159999999996, 1.810000000018741e-07, 0.0010099859999999974, 1.810000000018741e-07, 0.0010096939999999985, 1.670000000023042e-07, 0.001010082999999995, 1.810000000018741e-07, 0.001010111000000001, 1.8000000000240046e-07, 0.0010096389999999997, 1.809999999949352e-07, 0.0010098610000000077, 1.669999999953653e-07, 0.0010099439999999987, 1.810000000018741e-07, 0.001009790999999996, 1.810000000018741e-07, 0.001009930000000006, 1.8099999998799632e-07, 0.001010194000000006, 1.810000000018741e-07]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.921
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.925
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}