Summary


Boardsame54-xpro
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:2700:00:39.897
100%

Log


Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:01.480
INFO
Starting process: make reset
00:27:01.491
INFO
Waiting for process to complete.
00:27:02.625
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:02.629
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:02.645
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:02.785
INFO
Starting process: make reset
00:27:02.800
INFO
Waiting for process to complete.
00:27:03.922
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:03.926
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:03.943
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.053
INFO
${RESULT} = {'cmd': 'gpio_set 3 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.057
INFO
${RESULT} = {'cmd': 'gpio_set 3 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.176
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.195
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.200
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.260
INFO
${RESULT} = {'cmd': 'gpio_clear 3 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.266
INFO
${RESULT} = {'cmd': 'gpio_clear 3 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.393
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.410
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.414
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:04.477
INFO
Starting process: make reset
00:27:04.488
INFO
Waiting for process to complete.
00:27:05.572
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.577
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.593
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.705
INFO
${RESULT} = {'cmd': 'gpio_set 1 1', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.709
INFO
${RESULT} = {'cmd': 'gpio_set 1 1', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.828
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.855
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.861
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.926
INFO
${RESULT} = {'cmd': 'gpio_clear 1 1', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:05.931
INFO
${RESULT} = {'cmd': 'gpio_clear 1 1', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:06.059
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:06.077
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:06.080
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:06.143
INFO
Starting process: make reset
00:27:06.154
INFO
Waiting for process to complete.
00:27:07.276
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.280
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.297
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.410
INFO
${RESULT} = {'cmd': 'gpio_set 1 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.414
INFO
${RESULT} = {'cmd': 'gpio_set 1 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.534
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.552
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.555
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.605
INFO
${RESULT} = {'cmd': 'gpio_clear 1 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.611
INFO
${RESULT} = {'cmd': 'gpio_clear 1 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.739
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.756
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:07.760
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:08.118
INFO
Starting process: make reset
00:27:08.129
INFO
Waiting for process to complete.
00:27:09.240
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:09.246
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:09.269
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:09.405
INFO
Starting process: make reset
00:27:09.416
INFO
Waiting for process to complete.
00:27:10.501
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:10.505
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:10.524
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:10.618
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:10.672
INFO
Starting process: make reset
00:27:10.683
INFO
Waiting for process to complete.
00:27:11.791
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:11.796
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:11.814
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:11.906
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:11.961
INFO
Starting process: make reset
00:27:11.972
INFO
Waiting for process to complete.
00:27:13.094
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.098
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.119
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.252
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.256
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.292
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.296
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.327
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.331
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.368
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.372
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.408
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.412
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.443
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.447
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.491
INFO
${RESULT} = {'cmd': 'gpio_set 0 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.495
INFO
${RESULT} = {'cmd': 'gpio_set 0 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.614
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.631
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.635
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.678
INFO
${RESULT} = {'cmd': 'gpio_clear 0 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.682
INFO
${RESULT} = {'cmd': 'gpio_clear 0 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.801
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.820
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.823
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:13.886
INFO
Starting process: make reset
00:27:13.897
INFO
Waiting for process to complete.
00:27:15.017
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.021
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.040
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.153
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.156
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.192
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.197
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.229
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.233
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.270
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.273
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.309
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.313
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.344
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.348
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.381
INFO
${RESULT} = {'cmd': 'gpio_set 0 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.385
INFO
${RESULT} = {'cmd': 'gpio_set 0 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.505
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.523
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.527
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.572
INFO
${RESULT} = {'cmd': 'gpio_clear 0 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.575
INFO
${RESULT} = {'cmd': 'gpio_clear 0 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.694
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.713
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.716
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Resets the device
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:15.779
INFO
Starting process: make reset
00:27:15.790
INFO
Waiting for process to complete.
00:27:16.904
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:16.908
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27
00:27:16.925
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:27 / 28.10.2021 - 00:27