Summary


Boardremote-revb
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2023.01-devel-592-g154b1d6397
HIL Tests Version
5e18f75314
Date / Time
07.12.202223:2800:01:24.442
100%

Log


Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:29
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:29.654
INFO
Starting process: make reset
23:28:29.674
INFO
Waiting for process to complete.
23:28:31.680
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:31.688
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:31.718
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:32.719
INFO
Starting process: make reset
23:28:32.738
INFO
Waiting for process to complete.
23:28:34.839
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:34.846
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:34.878
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:35.840
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:35.847
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:35.984
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.015
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.022
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.110
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.116
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.253
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.284
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.291
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:36.396
INFO
Starting process: make reset
23:28:36.415
INFO
Waiting for process to complete.
23:28:38.397
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:38.405
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:38.438
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.425
INFO
${RESULT} = {'cmd': 'gpio_set 0 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.432
INFO
${RESULT} = {'cmd': 'gpio_set 0 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.569
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.603
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.610
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.697
INFO
${RESULT} = {'cmd': 'gpio_clear 0 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.703
INFO
${RESULT} = {'cmd': 'gpio_clear 0 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.840
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.872
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.879
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:39.986
INFO
Starting process: make reset
23:28:40.005
INFO
Waiting for process to complete.
23:28:42.043
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:42.050
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:42.083
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:43.032
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Verify if board to philip wiring is correct.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:29
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:43.615
INFO
Starting process: make reset
23:28:43.634
INFO
Waiting for process to complete.
23:28:45.613
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:45.621
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:45.649
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:46.654
INFO
Starting process: make reset
23:28:46.674
INFO
Waiting for process to complete.
23:28:48.683
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:48.690
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:48.723
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:49.673
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:49.762
INFO
Starting process: make reset
23:28:49.781
INFO
Waiting for process to complete.
23:28:52.081
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:52.089
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:52.122
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:53.070
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:53.161
INFO
Starting process: make reset
23:28:53.179
INFO
Waiting for process to complete.
23:28:55.322
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:55.329
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:55.362
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.347
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.354
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.419
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.426
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.485
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.491
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.558
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.565
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.630
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.637
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.697
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.704
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.769
INFO
${RESULT} = {'cmd': 'gpio_set 2 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.777
INFO
${RESULT} = {'cmd': 'gpio_set 2 0', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.913
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.945
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:56.952
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:57.037
INFO
${RESULT} = {'cmd': 'gpio_clear 2 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:57.044
INFO
${RESULT} = {'cmd': 'gpio_clear 2 0', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:57.180
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:57.212
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
23:28:57.220
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:29
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Resets the device
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:28
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:29
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:28 / 07.12.2022 - 23:29
23:28:57.323
INFO
Starting process: make reset
23:28:57.345
INFO
Waiting for process to complete.
23:29:01.095
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:01.103
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:01.136
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.115
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.122
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.189
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.196
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.255
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.262
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.329
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.336
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.402
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.409
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.467
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.474
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.542
INFO
${RESULT} = {'cmd': 'gpio_set 2 1', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.550
INFO
${RESULT} = {'cmd': 'gpio_set 2 1', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.687
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.723
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.729
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.815
INFO
${RESULT} = {'cmd': 'gpio_clear 2 1', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.822
INFO
${RESULT} = {'cmd': 'gpio_clear 2 1', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.958
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.990
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:02.997
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Resets the device
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:03.101
INFO
Starting process: make reset
23:29:03.120
INFO
Waiting for process to complete.
23:29:05.358
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:05.366
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:05.398
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:06.400
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:06.407
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:06.471
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:06.478
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:06.537
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
23:29:06.544
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:29 / 07.12.2022 - 23:29
<
Documentation: Executes the given keyword with the given arguments.