Summary


Boardnucleo-l152re
Testsuitetests_periph_uart
Status
PASS
RIOT Version
2023.01-devel-532-g945af26648
HIL Tests Version
5e18f75314
Date / Time
03.12.202223:1800:01:41.465
100%

Log


Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:20
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests
Documentation: Verify basic functionality of the periph UART API.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:19
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/01__periph_uart_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:29.113
INFO
Starting process: make reset
23:18:29.124
INFO
Waiting for process to complete.
23:18:30.391
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:30.395
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:30.414
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write short string to UART and verify echo reply.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:32.887
INFO
Starting process: make reset
23:18:32.900
INFO
Waiting for process to complete.
23:18:34.158
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:34.162
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:34.183
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:36.618
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:36.621
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:36.916
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:36.919
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:36.987
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:36.990
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ${data} is not in the last API Result
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:37.099
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:37.046
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 17, 'result': 'Success'}
23:18:37.047
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:37.064
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:37.064
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:37.065
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:37.065
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:37.102
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Write long string to UART and verify echo reply.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:37.138
INFO
Starting process: make reset
23:18:37.149
INFO
Waiting for process to complete.
23:18:38.454
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:38.458
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:38.478
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:40.877
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:40.880
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.173
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.177
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.265
INFO
${RESULT} = {'cmd': 'uart_write 1 t846537251766897608661449722565676947673214', 'data': ['t846537251766897608661449722565676947673214'], 'msg': '> UART_DEV(1) RX: [t846537251766897608661449722565676947673214]\\n'...
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.269
INFO
${RESULT} = {'cmd': 'uart_write 1 t846537251766897608661449722565676947673214', 'data': ['t846537251766897608661449722565676947673214'], 'msg': '> UART_DEV(1) RX: [t846537251766897608661449722565676947673214]\\n'...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ${data} is not in the last API Result
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.379
INFO
${stats} = RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.326
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 56, 'result': 'Success'}
23:18:41.327
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 56, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.344
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:41.344
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:41.345
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:41.345
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.381
INFO
RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify echo of short string to UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:41.417
INFO
Starting process: make reset
23:18:41.428
INFO
Waiting for process to complete.
23:18:42.747
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:42.751
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:42.773
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.209
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(668,2,2,1)', 'rr 668 1', 'wr 668 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.211
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(668,2,2,1)', 'rr 668 1', 'wr 668 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.504
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.507
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.576
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['u222'], 'msg': '> UART_DEV(1) RX: [u222]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.580
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['u222'], 'msg': '> UART_DEV(1) RX: [u222]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ${data} is not in the last API Result
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.688
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.635
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 17, 'result': 'Success'}
23:18:45.635
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.653
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:45.653
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:45.653
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:45.654
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.691
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify echo of long string to UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:45.727
INFO
Starting process: make reset
23:18:45.738
INFO
Waiting for process to complete.
23:18:46.991
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:46.995
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:47.016
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.455
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(668,2,2,1)', 'rr 668 1', 'wr 668 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.458
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(668,2,2,1)', 'rr 668 1', 'wr 668 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.750
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.754
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.844
INFO
${RESULT} = {'cmd': 'uart_write 1 t846537251766897608661449722565676947673214', 'data': ['u9576483628779:871977255:833676787:58784325'], 'msg': '> UART_DEV(1) RX: [u9576483628779:871977255:833676787:58784325]\\n'...
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.848
INFO
${RESULT} = {'cmd': 'uart_write 1 t846537251766897608661449722565676947673214', 'data': ['u9576483628779:871977255:833676787:58784325'], 'msg': '> UART_DEV(1) RX: [u9576483628779:871977255:833676787:58784325]\\n'...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ${data} is not in the last API Result
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.959
INFO
${stats} = RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.906
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 56, 'result': 'Success'}
23:18:49.906
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 56, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.924
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:49.924
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:49.924
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:49.925
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:49.962
INFO
RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify access of user register via UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:50.008
INFO
Starting process: make reset
23:18:50.020
INFO
Waiting for process to complete.
23:18:51.357
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:51.362
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:51.384
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:53.829
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(668,2,2,2)', 'rr 668 1', 'wr 668 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:53.832
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(668,2,2,2)', 'rr 668 1', 'wr 668 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.127
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.130
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.209
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr 0 10"', 'data': ['{"data":[0,1,2,3,4,5,6,7,8,9'], 'msg': '> UART_DEV(1) RX: [{"data":[0,1,2,3,4,5,6,7,8,9], "result":0}]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.212
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr 0 10"', 'data': ['{"data":[0,1,2,3,4,5,6,7,8,9'], 'msg': '> UART_DEV(1) RX: [{"data":[0,1,2,3,4,5,6,7,8,9], "result":0}]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.314
INFO
${stats} = RX: 20, TX: 73, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.258
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 20, 'result': 'Success'}
23:18:54.258
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 73, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.277
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:54.278
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:54.278
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:54.278
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.317
INFO
RX: 20, TX: 73, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verfiy access of invalid register via UART fails.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:54.354
INFO
Starting process: make reset
23:18:54.365
INFO
Waiting for process to complete.
23:18:55.612
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:55.616
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:55.638
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.077
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(668,2,2,2)', 'rr 668 1', 'wr 668 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.079
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(668,2,2,2)', 'rr 668 1', 'wr 668 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 674 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.373
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.377
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.448
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr -1 10"', 'data': ['{"result":22}'], 'msg': '> UART_DEV(1) RX: [{"result":22}]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.452
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr -1 10"', 'data': ['{"result":22}'], 'msg': '> UART_DEV(1) RX: [{"result":22}]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.540
INFO
${stats} = RX: 21, TX: 44, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.493
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 21, 'result': 'Success'}
23:18:58.493
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 44, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.510
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:58.510
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:58.511
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:18:58.511
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.543
INFO
RX: 21, TX: 44, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write with baudrate 9600.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:19
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Resets the device
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:58.581
INFO
Starting process: make reset
23:18:58.592
INFO
Waiting for process to complete.
23:18:59.884
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:59.889
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:18 / 03.12.2022 - 23:18
23:18:59.912
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.363
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 674 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.369
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 674 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.678
INFO
${RESULT} = {'cmd': 'uart_init 1 9600', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 9600', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.683
INFO
${RESULT} = {'cmd': 'uart_init 1 9600', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 9600', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.772
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.776
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ${data} is not in the last API Result
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.887
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.832
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 17, 'result': 'Success'}
23:19:02.832
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.850
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:02.851
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:02.851
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:02.852
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.889
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write with baudrate 38400.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Resets the device
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:02.926
INFO
Starting process: make reset
23:19:02.937
INFO
Waiting for process to complete.
23:19:04.192
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:04.240
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:04.260
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:06.650
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 674 0 150 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:06.653
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 674 0 150 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:06.949
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:06.953
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:07.031
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:07.035
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ${data} is not in the last API Result
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:07.137
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:07.087
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 17, 'result': 'Success'}
23:19:07.088
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:07.105
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:07.105
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:07.105
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:07.106
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:07.140
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write fails when baudrates do not match.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Resets the device
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:07.177
INFO
Starting process: make reset
23:19:07.188
INFO
Waiting for process to complete.
23:19:08.493
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:08.497
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:08.518
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Setup uart parameters on PHiLIP
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Setup tester's UART.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:10.919
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 674 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:10.922
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(668,2,2,0)', 'rr 668 1', 'wr 668 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 674 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:13.222
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Init UART device
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:13.229
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Remove garbage from UART buffer
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the given API ``call`` does not timeout.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:17.340
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': None, 'result': 'Timeout'}
Documentation: Write data to UART device.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:17.347
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:17.467
INFO
${stats} = RX: 0, TX: 0, PE: 0, FE: 1, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:17.401
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 679 2'], 'data': 0, 'result': 'Success'}
23:19:17.402
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 681 2'], 'data': 0, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:17.423
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(683,1,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:17.424
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(683,2,1)', 'rr 683 1']], 'data': 1, 'result': 'Success'}
23:19:17.425
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(683,3,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
23:19:17.425
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(683,4,1)', 'rr 683 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:17.470
INFO
RX: 0, TX: 0, PE: 0, FE: 1, NF: 0, ORE: 0
Documentation: Verify mode config functionality of the periph UART API.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:20
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/02__periph_uart_mode.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Resets the device
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:17.767
INFO
Starting process: make reset
23:19:17.777
INFO
Waiting for process to complete.
23:19:19.007
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:19.012
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:19.034
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Verify UART mode with 8 data bits and even parity.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Resets the device
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:21.488
INFO
Starting process: make reset
23:19:21.499
INFO
Waiting for process to complete.
23:19:22.744
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:22.748
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:22.769
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Verify DUT supports UART mode configuration
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:25.247
INFO
${status} = PASS
23:19:25.247
INFO
${value} = None
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
23:19:25.222
INFO
${RESULT} = {'cmd': 'uart_mode 1 8 N 1', 'data': None, 'msg': 'Successfully applied UART_DEV(1) settings', 'result': 'Success'}
Documentation: Setup databits, parity and stopbits.
Start / End: 03.12.2022 - 23:19 / 03.12.2022 - 23:19
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:19 / 03.12.2022