Summary


Boardnucleo-l152re
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2023.01-devel-592-g154b1d6397
HIL Tests Version
5e18f75314
Date / Time
07.12.202223:2200:00:43.902
100%

Log


Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:23
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:24.054
INFO
Starting process: make reset
23:22:24.065
INFO
Waiting for process to complete.
23:22:25.332
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:25.337
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:25.352
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:25.479
INFO
Starting process: make reset
23:22:25.493
INFO
Waiting for process to complete.
23:22:26.816
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:26.821
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:26.838
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:26.942
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:26.946
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.073
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.094
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.098
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.156
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.161
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.284
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.302
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.306
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.369
INFO
Starting process: make reset
23:22:27.380
INFO
Waiting for process to complete.
23:22:28.685
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.690
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.707
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.826
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.831
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.955
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.973
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.977
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.025
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.029
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.148
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.167
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.171
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.250
INFO
Starting process: make reset
23:22:29.260
INFO
Waiting for process to complete.
23:22:30.596
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.600
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.617
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.715
INFO
${RESULT} = {'cmd': 'gpio_set 3 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.719
INFO
${RESULT} = {'cmd': 'gpio_set 3 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.838
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.857
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.861
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.908
INFO
${RESULT} = {'cmd': 'gpio_clear 3 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.912
INFO
${RESULT} = {'cmd': 'gpio_clear 3 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:31.031
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:31.049
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:31.053
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify if board to philip wiring is correct.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:31.407
INFO
Starting process: make reset
23:22:31.418
INFO
Waiting for process to complete.
23:22:32.685
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.690
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.709
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.820
INFO
Starting process: make reset
23:22:32.831
INFO
Waiting for process to complete.
23:22:34.087
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.092
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.110
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.196
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:34.253
INFO
Starting process: make reset
23:22:34.264
INFO
Waiting for process to complete.
23:22:35.528
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:35.532
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:35.550
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:35.627
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:35.687
INFO
Starting process: make reset
23:22:35.702
INFO
Waiting for process to complete.
23:22:37.019
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.023
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.041
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.138
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.142
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.178
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.182
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.214
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.218
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.255
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.258
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.302
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.307
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.347
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.352
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.392
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.396
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.515
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.532
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.536
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.583
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.587
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.706
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.724
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.728
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:37.796
INFO
Starting process: make reset
23:22:37.806
INFO
Waiting for process to complete.
23:22:39.120
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.124
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.141
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.240
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.244
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.280
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.283
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.315
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.318
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.355
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.359
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.398
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.401
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.433
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.436
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.472
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.476
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.595
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.613
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.617
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.663
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.667
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.786
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.805
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.808
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:39.871
INFO
Starting process: make reset
23:22:39.881
INFO
Waiting for process to complete.
23:22:41.174
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.178
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:41.196
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22