Summary


Boardnucleo-l073rz
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2021.10-devel-737-g92fc4ace65
HIL Tests Version
cff0e3ca87
Date / Time
21.09.202100:2600:01:08.029
100%

Log


Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:16.479
INFO
Starting process: make reset
00:26:16.499
INFO
Waiting for process to complete.
00:26:18.560
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:18.568
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:18.599
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:18.790
INFO
Starting process: make reset
00:26:18.811
INFO
Waiting for process to complete.
00:26:20.923
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:20.930
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:20.965
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.134
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.140
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.278
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.308
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.315
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.398
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.406
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.543
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.580
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.588
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:21.698
INFO
Starting process: make reset
00:26:21.717
INFO
Waiting for process to complete.
00:26:23.815
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:23.822
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:23.855
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.030
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.037
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.173
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.205
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.212
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.295
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.302
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.439
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.471
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.478
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:24.588
INFO
Starting process: make reset
00:26:24.607
INFO
Waiting for process to complete.
00:26:26.682
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:26.690
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:26.724
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:26.899
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:26.905
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.042
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.073
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.080
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.163
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.170
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.307
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.338
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.344
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify if board to philip wiring is correct.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:27.962
INFO
Starting process: make reset
00:26:27.980
INFO
Waiting for process to complete.
00:26:30.101
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:30.109
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:30.139
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:30.335
INFO
Starting process: make reset
00:26:30.354
INFO
Waiting for process to complete.
00:26:32.458
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:32.466
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:32.498
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:32.647
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:32.737
INFO
Starting process: make reset
00:26:32.757
INFO
Waiting for process to complete.
00:26:34.831
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:34.839
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:34.872
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:35.015
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:35.105
INFO
Starting process: make reset
00:26:35.125
INFO
Waiting for process to complete.
00:26:37.228
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.236
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.269
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.444
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.451
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.519
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.527
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.585
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.592
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.666
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.672
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.739
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.746
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.804
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.811
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.878
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:37.885
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.021
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.053
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.060
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.146
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.153
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.289
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.322
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.330
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:38.435
INFO
Starting process: make reset
00:26:38.453
INFO
Waiting for process to complete.
00:26:40.553
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.560
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.595
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.772
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.780
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.853
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.860
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.921
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.929
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:40.995
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.002
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.068
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.075
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.134
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.141
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.207
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.214
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.351
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.383
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.390
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.477
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.484
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.621
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.653
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.660
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Resets the device
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:41.767
INFO
Starting process: make reset
00:26:41.786
INFO
Waiting for process to complete.
00:26:43.887
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:43.895
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
00:26:43.928
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:26 / 21.09.2021 - 00:26