Summary


Boardnucleo-g474re
Testsuitetests_ztimer_benchmarks
Status
PASS
RIOT Version
2022.07-devel-506-gdc7bc9f854
HIL Tests Version
8fe8d2d38b
Date / Time
23.05.202200:1100:03:39.876
100%

Log


Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:15
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the test application
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs a process and waits for it to complete.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:52.867
INFO
Starting process: make reset
00:11:52.878
INFO
Waiting for process to complete.
00:11:54.163
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.167
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.386
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Record the timer version
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes all the given keywords in a sequence.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.523
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.643
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['ztimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.647
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['ztimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.683
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.686
INFO
VALUE: ztimer
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the test application
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs a process and waits for it to complete.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:54.778
INFO
Starting process: make reset
00:11:54.790
INFO
Waiting for process to complete.
00:11:56.048
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:56.052
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:56.339
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
Documentation: Executes all the given keywords in a sequence.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:56.474
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the specified keyword multiple times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
00:11:56.566
INFO
Repeating keyword, round 1/20.
00:11:57.100
INFO
Repeating keyword, round 2/20.
00:11:57.621
INFO
Repeating keyword, round 3/20.
00:11:58.138
INFO
Repeating keyword, round 4/20.
00:11:58.667
INFO
Repeating keyword, round 5/20.
00:11:59.188
INFO
Repeating keyword, round 6/20.
00:11:59.707
INFO
Repeating keyword, round 7/20.
00:12:00.237
INFO
Repeating keyword, round 8/20.
00:12:00.756
INFO
Repeating keyword, round 9/20.
00:12:01.273
INFO
Repeating keyword, round 10/20.
00:12:01.801
INFO
Repeating keyword, round 11/20.
00:12:02.324
INFO
Repeating keyword, round 12/20.
00:12:02.843
INFO
Repeating keyword, round 13/20.
00:12:03.362
INFO
Repeating keyword, round 14/20.
00:12:03.884
INFO
Repeating keyword, round 15/20.
00:12:04.402
INFO
Repeating keyword, round 16/20.
00:12:04.918
INFO
Repeating keyword, round 17/20.
00:12:05.441
INFO
Repeating keyword, round 18/20.
00:12:05.967
INFO
Repeating keyword, round 19/20.
00:12:06.497
INFO
Repeating keyword, round 20/20.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:56.657
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:56.660
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:56.993
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018040667, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018040903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.003
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018040667, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018040903, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.055
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.360000000006801e-07, 0.001007694, 2.220000000011102e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.064
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.067
INFO
VALUE: [0, 2.360000000006801e-07, 0.001007694, 2.220000000011102e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.3599999999721066e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069159999999966, 2.2300000000752274e-07, 0.0010069159999999966, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.219999999941713e-07]
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.191
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.195
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.515
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017686653, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017686889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.525
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017686653, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017686889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.576
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.360000000006801e-07, 0.001007819, 2.2300000000058384e-07, 0.001006916, 2.2199999999764075e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.584
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.588
INFO
VALUE: [0, 2.360000000006801e-07, 0.001007819, 2.2300000000058384e-07, 0.001006916, 2.2199999999764075e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.001006916, 2.3700000000015375e-07, 0.0010069020000000005, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.001006917000000003, 2.3599999999721066e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.001006901999999997, 2.3700000000015375e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.0010069159999999966, 2.3700000000015375e-07, 0.001006902000000004, 2.360000000006801e-07, 0.001006916999999996, 2.220000000080491e-07, 0.001006916999999996, 2.219999999941713e-07, 0.00100691700000001, 2.219999999941713e-07]
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.712
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:57.715
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.034
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017550236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017550458, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.043
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017550236, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017550458, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.093
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.220000000011102e-07, 0.001007222999999998, 2.220000000011102e-07, 0.001006916, 2.3700000000015375e-07, 0.0010069020000000005, 2.3599999999721066e-07, 0.001006917000000003, 2.2199...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.102
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.106
INFO
VALUE: [0, 2.220000000011102e-07, 0.001007222999999998, 2.220000000011102e-07, 0.001006916, 2.3700000000015375e-07, 0.0010069020000000005, 2.3599999999721066e-07, 0.001006917000000003, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006916, 2.229999999971144e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000752274e-07, 0.0010069159999999966, 2.2299999999364495e-07, 0.0010069160000000105, 2.219999999941713e-07, 0.001006916999999996, 2.360000000006801e-07]
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.235
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.239
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.559
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017535653, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017535889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.569
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017535653, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017535889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.621
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.360000000006801e-07, 0.0010076800000000004, 2.3700000000015375e-07, 0.001006916, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.630
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.633
INFO
VALUE: [0, 2.360000000006801e-07, 0.0010076800000000004, 2.3700000000015375e-07, 0.001006916, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.3599999999721066e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.3599999999721066e-07, 0.001006917000000003, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000752274e-07, 0.0010069159999999966, 2.2299999999364495e-07, 0.0010069160000000105, 2.360000000006801e-07, 0.0010069029999999896, 2.360000000006801e-07, 0.00100691700000001, 2.219999999941713e-07]
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.759
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:58.762
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.082
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018563917, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018564139, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.091
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018563917, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018564139, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.142
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.220000000011102e-07, 0.0010071939999999995, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.3599999999721066e-07, 0.0010069030000000034, 2.359999999972...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.150
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.154
INFO
VALUE: [0, 2.220000000011102e-07, 0.0010071939999999995, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.3599999999721066e-07, 0.0010069030000000034, 2.3599999999721066e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069020000000005, 2.3700000000015375e-07, 0.0010069020000000005, 2.3599999999721066e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069159999999966, 2.3700000000015375e-07, 0.001006902000000004, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.00100690199999999, 2.360000000006801e-07, 0.00100691700000001, 2.219999999941713e-07, 0.001006916999999996, 2.220000000080491e-07, 0.001006916999999996, 2.360000000006801e-07]
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.279
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.283
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.601
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017739264, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017739486, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.611
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017739264, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017739486, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.661
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.2199999999764075e-07, 0.001007931, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.2199999999764075e-07, 0.00100691...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.670
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.674
INFO
VALUE: [0, 2.2199999999764075e-07, 0.001007931, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.2199999999764075e-07, 0.001006917000000003, 2.3599999999721066e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.001006916, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.001006901999999997, 2.3700000000015375e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999999374122e-07, 0.001006917000000003, 2.220000000011102e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999999374122e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.00100691700000001, 2.219999999941713e-07, 0.0010069159999999966, 2.3700000000015375e-07, 0.001006902000000004, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07]
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Resets the device
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.801
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
00:11:59.804
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:11
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
00:12:00.129
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019833278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019833514, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:11 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.139
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019833278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019833514, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.191
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.360000000006801e-07, 0.0010073609999999983, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.00100691699999999...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.200
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.204
INFO
VALUE: [0, 2.360000000006801e-07, 0.0010073609999999983, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069020000000005, 2.3700000000015375e-07, 0.0010069020000000005, 2.3599999999721066e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.3699999999321486e-07, 0.001006902000000004, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.3599999999374122e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.001006902000000004, 2.360000000006801e-07, 0.001006916999999996, 2.219999999941713e-07, 0.00100691700000001, 2.219999999941713e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07]
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Resets the device
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.329
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.333
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.652
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017874625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017874847, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.661
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017874625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017874847, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.711
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.2199999999764075e-07, 0.0010078339999999991, 2.220000000011102e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.720
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.723
INFO
VALUE: [0, 2.2199999999764075e-07, 0.0010078339999999991, 2.220000000011102e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.001006917000000003, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999999374122e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.3599999999374122e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999896, 2.360000000006801e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.0010069159999999966, 2.220000000080491e-07, 0.001006916999999996, 2.219999999941713e-07]
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Resets the device
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.846
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:00.850
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.168
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017443694, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017443917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.178
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017443694, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017443917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.228
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.2300000000058384e-07, 0.001007721999999999, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.3600...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.237
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.240
INFO
VALUE: [0, 2.2300000000058384e-07, 0.001007721999999999, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006901999999997, 2.3700000000015375e-07, 0.001006916, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.001006917000000003, 2.2199999999764075e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999999374122e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069159999999966, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.3599999999374122e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999896, 2.360000000006801e-07, 0.00100691700000001, 2.219999999941713e-07, 0.0010069159999999966, 2.2300000000752274e-07]
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Resets the device
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.363
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.367
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.686
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017479444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017479681, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.696
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017479444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017479681, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.747
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.3700000000015375e-07, 0.001007721999999999, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.3599999999721...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.757
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.761
INFO
VALUE: [0, 2.3700000000015375e-07, 0.001007721999999999, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.3599999999721066e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.3599999999721066e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.001006901999999997, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006901999999997, 2.3700000000015375e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999998680232e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000080491e-07, 0.0010069159999999966, 2.2300000000752274e-07, 0.0010069159999999966, 2.2299999999364495e-07]
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Resets the device
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.893
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:01.897
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.216
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018049792, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018050028, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.226
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018049792, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018050028, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.277
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.360000000006801e-07, 0.0010075550000000003, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.2199...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.287
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.291
INFO
VALUE: [0, 2.360000000006801e-07, 0.0010075550000000003, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.001006917000000003, 2.3599999999721066e-07, 0.001006903, 2.360000000006801e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.3599999999721066e-07, 0.001006917000000003, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006901999999997, 2.3700000000015375e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.3599999999374122e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.0010069159999999966, 2.3700000000015375e-07, 0.001006902000000004, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006901999999997, 2.3700000000015375e-07, 0.0010069160000000035, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000105, 2.3599999998680232e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000080491e-07]
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Resets the device
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.415
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.418
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.736
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017398653, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017398889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.747
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017398653, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017398889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.798
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.360000000006801e-07, 0.0010073609999999983, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.36000000000680...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.806
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.810
INFO
VALUE: [0, 2.360000000006801e-07, 0.0010073609999999983, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.001006916, 2.229999999971144e-07, 0.001006916, 2.2300000000058384e-07, 0.001006916, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.001006917000000003, 2.2199999999764075e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069020000000005, 2.3700000000015375e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.219999999941713e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.0010069159999999966, 2.3700000000015375e-07, 0.001006901999999997, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.3599999999374122e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999896, 2.360000000006801e-07, 0.00100691700000001, 2.219999999941713e-07, 0.001006916999999996, 2.220000000080491e-07, 0.001006916999999996, 2.360000000006801e-07]
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Resets the device
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.933
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:02.937
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:03.255
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017504444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017504667, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:03.265
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017504444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017504667, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Only use with data containing dicts as follows:
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:03.316
INFO
${GPIO_OVERHEAD} = {'source_diff': [0, 2.2300000000058384e-07, 0.0010077909999999975, 2.2300000000058384e-07, 0.001006916, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006...
Documentation: Adds the given property in output
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:03.325
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:03.329
INFO
VALUE: [0, 2.2300000000058384e-07, 0.0010077909999999975, 2.2300000000058384e-07, 0.001006916, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.0010069020000000005, 2.3700000000015375e-07, 0.0010069020000000005, 2.360000000006801e-07, 0.0010069169999999995, 2.2199999999764075e-07, 0.001006917000000003, 2.2199999999764075e-07, 0.0010069169999999995, 2.360000000006801e-07, 0.001006903, 2.360000000006801e-07, 0.0010069169999999995, 2.220000000011102e-07, 0.0010069159999999966, 2.2300000000058384e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2300000000058384e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000035, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.001006916999999996, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.001006902000000004, 2.3700000000015375e-07, 0.0010069159999999966, 2.220000000011102e-07, 0.001006917000000003, 2.219999999941713e-07, 0.001006917000000003, 2.220000000011102e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07, 0.0010069029999999965, 2.360000000006801e-07, 0.0010069160000000035, 2.2299999999364495e-07, 0.0010069160000000105, 2.2299999999364495e-07, 0.0010069159999999966, 2.220000000080491e-07, 0.001006916999999996, 2.360000000006801e-07, 0.0010069030000000034, 2.360000000006801e-07]
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Reset the PHiLIP MCU
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Resets the device
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Executes the given keyword with the given arguments.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:03.453
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 23.05.2022 - 00:12 / 23.05.2022 - 00:12
00:12:03.457
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}