Summary


Boardnucleo-g474re
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.10-devel-565-g44440caf68
HIL Tests Version
5e18f75314
Date / Time
03.09.202200:2400:00:43.546
100%

Log


Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:25
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:19.133
INFO
Starting process: make reset
00:24:19.144
INFO
Waiting for process to complete.
00:24:20.391
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:20.396
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:20.411
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:20.538
INFO
Starting process: make reset
00:24:20.554
INFO
Waiting for process to complete.
00:24:21.818
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:21.822
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:21.840
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:21.949
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:21.952
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.072
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.093
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.098
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.154
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.158
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.279
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.296
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.299
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:22.361
INFO
Starting process: make reset
00:24:22.373
INFO
Waiting for process to complete.
00:24:23.634
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.638
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.655
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.799
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.803
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.921
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.939
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.942
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.985
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:23.989
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:24.108
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:24.127
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:24.131
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:24.204
INFO
Starting process: make reset
00:24:24.215
INFO
Waiting for process to complete.
00:24:25.513
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.520
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.540
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.655
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.658
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.777
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.795
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.799
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.845
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.849
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.968
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.985
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:25.989
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify if board to philip wiring is correct.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:26.367
INFO
Starting process: make reset
00:24:26.378
INFO
Waiting for process to complete.
00:24:27.633
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:27.638
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:27.657
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:27.791
INFO
Starting process: make reset
00:24:27.805
INFO
Waiting for process to complete.
00:24:29.071
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:29.075
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:29.092
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:29.192
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:29.247
INFO
Starting process: make reset
00:24:29.259
INFO
Waiting for process to complete.
00:24:30.600
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:30.604
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:30.620
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:30.716
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:30.768
INFO
Starting process: make reset
00:24:30.780
INFO
Waiting for process to complete.
00:24:32.011
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.017
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.038
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.167
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.170
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.207
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.210
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.241
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.245
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.282
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.285
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.321
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.325
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.357
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.360
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.393
INFO
${RESULT} = {'cmd': 'gpio_set 2 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.397
INFO
${RESULT} = {'cmd': 'gpio_set 2 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.516
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.533
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.537
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.581
INFO
${RESULT} = {'cmd': 'gpio_clear 2 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.584
INFO
${RESULT} = {'cmd': 'gpio_clear 2 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.703
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.724
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.728
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:32.790
INFO
Starting process: make reset
00:24:32.801
INFO
Waiting for process to complete.
00:24:34.024
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.029
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.045
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.165
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.168
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.205
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.209
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.240
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.243
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.280
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.284
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.320
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.323
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.356
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.359
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.393
INFO
${RESULT} = {'cmd': 'gpio_set 2 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.396
INFO
${RESULT} = {'cmd': 'gpio_set 2 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.515
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.533
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.537
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.580
INFO
${RESULT} = {'cmd': 'gpio_clear 2 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.584
INFO
${RESULT} = {'cmd': 'gpio_clear 2 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.703
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.721
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.725
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Resets the device
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Reset the test application
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:34.787
INFO
Starting process: make reset
00:24:34.798
INFO
Waiting for process to complete.
00:24:36.061
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:36.067
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24
00:24:36.085
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.09.2022 - 00:24 / 03.09.2022 - 00:24