Summary


Boardnucleo-f767zi
Testsuitetests_periph_gpio
Status
FAIL
RIOT Version
2021.10-devel-737-g92fc4ace65
HIL Tests Version
cff0e3ca87
Date / Time
21.09.202100:2100:00:42.173
93%

Log


Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:16.775
INFO
Starting process: make reset
00:21:16.786
INFO
Waiting for process to complete.
00:21:17.995
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:17.999
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:18.013
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:18.114
INFO
Starting process: make reset
00:21:18.124
INFO
Waiting for process to complete.
00:21:19.330
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.335
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.356
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.458
INFO
${RESULT} = {'cmd': 'gpio_set 4 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.462
INFO
${RESULT} = {'cmd': 'gpio_set 4 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.588
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.604
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.607
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.649
INFO
${RESULT} = {'cmd': 'gpio_clear 4 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.652
INFO
${RESULT} = {'cmd': 'gpio_clear 4 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.769
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.786
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.789
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:19.850
INFO
Starting process: make reset
00:21:19.860
INFO
Waiting for process to complete.
00:21:21.108
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.114
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.136
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.226
INFO
${RESULT} = {'cmd': 'gpio_set 4 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.229
INFO
${RESULT} = {'cmd': 'gpio_set 4 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.346
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.362
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.365
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.405
INFO
${RESULT} = {'cmd': 'gpio_clear 4 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.408
INFO
${RESULT} = {'cmd': 'gpio_clear 4 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.525
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.542
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.545
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:21.603
INFO
Starting process: make reset
00:21:21.613
INFO
Waiting for process to complete.
00:21:22.853
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:22.857
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:22.874
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:22.963
INFO
${RESULT} = {'cmd': 'gpio_set 4 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:22.966
INFO
${RESULT} = {'cmd': 'gpio_set 4 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.082
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.099
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.102
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.144
INFO
${RESULT} = {'cmd': 'gpio_clear 4 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.147
INFO
${RESULT} = {'cmd': 'gpio_clear 4 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.263
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.279
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.283
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify if board to philip wiring is correct.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:23.614
INFO
Starting process: make reset
00:21:23.624
INFO
Waiting for process to complete.
00:21:24.777
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:24.780
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:24.793
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:24.895
INFO
Starting process: make reset
00:21:24.905
INFO
Waiting for process to complete.
00:21:26.175
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:26.180
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:26.202
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:26.294
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:26.353
INFO
Starting process: make reset
00:21:26.363
INFO
Waiting for process to complete.
00:21:27.522
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:27.526
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:27.549
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:27.618
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:27.669
INFO
Starting process: make reset
00:21:27.679
INFO
Waiting for process to complete.
00:21:28.890
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:28.893
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:28.908
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:28.997
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.000
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.035
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.038
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.066
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.070
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.104
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.107
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.141
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.144
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.173
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.176
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.210
INFO
${RESULT} = {'cmd': 'gpio_set 6 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.213
INFO
${RESULT} = {'cmd': 'gpio_set 6 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.330
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.353
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.358
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.425
INFO
${RESULT} = {'cmd': 'gpio_clear 6 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.430
INFO
${RESULT} = {'cmd': 'gpio_clear 6 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.559
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.576
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.580
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:29.639
INFO
Starting process: make reset
00:21:29.649
INFO
Waiting for process to complete.
00:21:30.830
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:30.834
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:30.850
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:30.949
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:30.952
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:30.986
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:30.991
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.038
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.044
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.094
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.097
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.130
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.133
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.161
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.164
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.197
INFO
${RESULT} = {'cmd': 'gpio_set 6 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.200
INFO
${RESULT} = {'cmd': 'gpio_set 6 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.317
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.333
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.336
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.380
INFO
${RESULT} = {'cmd': 'gpio_clear 6 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.383
INFO
${RESULT} = {'cmd': 'gpio_clear 6 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.500
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.517
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.520
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Resets the device
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:31.578
INFO
Starting process: make reset
00:21:31.588
INFO
Waiting for process to complete.
00:21:32.771
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:32.775
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
00:21:32.790
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:21 / 21.09.2021 - 00:21