Summary


Boardnucleo-f303re
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2023.01-devel-592-g154b1d6397
HIL Tests Version
5e18f75314
Date / Time
07.12.202223:2200:00:41.208
100%

Log


Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:16.362
INFO
Starting process: make reset
23:22:16.372
INFO
Waiting for process to complete.
23:22:17.570
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:17.574
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:17.588
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:17.688
INFO
Starting process: make reset
23:22:17.699
INFO
Waiting for process to complete.
23:22:18.923
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:18.928
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:18.947
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.034
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.037
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.155
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.171
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.174
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.218
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.221
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.338
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.354
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.357
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:19.414
INFO
Starting process: make reset
23:22:19.424
INFO
Waiting for process to complete.
23:22:20.650
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.654
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.668
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.767
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.770
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.888
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.906
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.910
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.954
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:20.957
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:21.074
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:21.091
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:21.095
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:21.156
INFO
Starting process: make reset
23:22:21.166
INFO
Waiting for process to complete.
23:22:22.377
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.382
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.398
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.486
INFO
${RESULT} = {'cmd': 'gpio_set 3 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.490
INFO
${RESULT} = {'cmd': 'gpio_set 3 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.607
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.625
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.628
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.677
INFO
${RESULT} = {'cmd': 'gpio_clear 3 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.681
INFO
${RESULT} = {'cmd': 'gpio_clear 3 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.798
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.823
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:22.829
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify if board to philip wiring is correct.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:23.177
INFO
Starting process: make reset
23:22:23.186
INFO
Waiting for process to complete.
23:22:24.358
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:24.364
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:24.384
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:24.495
INFO
Starting process: make reset
23:22:24.504
INFO
Waiting for process to complete.
23:22:25.667
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:25.671
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:25.688
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:25.758
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:25.808
INFO
Starting process: make reset
23:22:25.817
INFO
Waiting for process to complete.
23:22:27.033
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.037
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.053
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.123
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:27.173
INFO
Starting process: make reset
23:22:27.182
INFO
Waiting for process to complete.
23:22:28.373
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.377
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.393
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.483
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.487
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.521
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.524
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.554
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.557
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.592
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.595
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.628
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.631
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.660
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.663
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.697
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.700
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.817
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.834
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.837
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.880
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:28.883
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.000
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.017
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.021
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:29.078
INFO
Starting process: make reset
23:22:29.088
INFO
Waiting for process to complete.
23:22:30.280
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.284
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.299
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.389
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.394
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.437
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.441
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.479
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.484
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.521
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.525
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.561
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.565
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.593
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.596
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.630
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.633
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.750
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.767
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.771
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.812
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.816
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.933
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.950
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:30.953
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Resets the device
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:31.011
INFO
Starting process: make reset
23:22:31.021
INFO
Waiting for process to complete.
23:22:32.264
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.269
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
23:22:32.290
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 07.12.2022 - 23:22 / 07.12.2022 - 23:22