Summary


Boardnucleo-f207zg
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:2600:00:43.604
100%

Log


Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:38.000
INFO
Starting process: make reset
00:26:38.011
INFO
Waiting for process to complete.
00:26:39.252
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:39.256
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:39.272
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:39.400
INFO
Starting process: make reset
00:26:39.411
INFO
Waiting for process to complete.
00:26:40.675
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.682
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.705
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.829
INFO
${RESULT} = {'cmd': 'gpio_set 4 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.833
INFO
${RESULT} = {'cmd': 'gpio_set 4 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.953
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.972
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:40.975
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:41.033
INFO
${RESULT} = {'cmd': 'gpio_clear 4 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:41.038
INFO
${RESULT} = {'cmd': 'gpio_clear 4 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:41.166
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:41.183
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:41.187
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:41.249
INFO
Starting process: make reset
00:26:41.260
INFO
Waiting for process to complete.
00:26:42.523
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.527
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.544
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.671
INFO
${RESULT} = {'cmd': 'gpio_set 4 12', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.676
INFO
${RESULT} = {'cmd': 'gpio_set 4 12', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.800
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.817
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.821
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.868
INFO
${RESULT} = {'cmd': 'gpio_clear 4 12', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.871
INFO
${RESULT} = {'cmd': 'gpio_clear 4 12', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:42.990
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.008
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.011
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:43.079
INFO
Starting process: make reset
00:26:43.089
INFO
Waiting for process to complete.
00:26:44.346
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.350
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.367
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.482
INFO
${RESULT} = {'cmd': 'gpio_set 4 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.485
INFO
${RESULT} = {'cmd': 'gpio_set 4 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.604
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.624
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.628
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.677
INFO
${RESULT} = {'cmd': 'gpio_clear 4 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.680
INFO
${RESULT} = {'cmd': 'gpio_clear 4 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.799
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.817
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:44.820
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:27
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:45.176
INFO
Starting process: make reset
00:26:45.186
INFO
Waiting for process to complete.
00:26:46.411
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:46.416
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:46.436
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:46.575
INFO
Starting process: make reset
00:26:46.586
INFO
Waiting for process to complete.
00:26:47.816
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.820
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.838
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:47.952
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:48.018
INFO
Starting process: make reset
00:26:48.029
INFO
Waiting for process to complete.
00:26:49.253
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:49.257
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:49.275
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:49.370
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:49.426
INFO
Starting process: make reset
00:26:49.440
INFO
Waiting for process to complete.
00:26:50.698
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.702
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.719
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.836
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.840
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.876
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.880
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.911
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.915
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.952
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.956
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.992
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:50.995
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.026
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.030
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.067
INFO
${RESULT} = {'cmd': 'gpio_set 6 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.070
INFO
${RESULT} = {'cmd': 'gpio_set 6 14', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.189
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.207
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.211
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.257
INFO
${RESULT} = {'cmd': 'gpio_clear 6 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.260
INFO
${RESULT} = {'cmd': 'gpio_clear 6 14', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.379
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.397
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.401
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:51.463
INFO
Starting process: make reset
00:26:51.474
INFO
Waiting for process to complete.
00:26:52.746
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.750
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.769
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.891
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.895
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.931
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.935
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.967
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:52.971
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.007
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.011
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.047
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.051
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.082
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.085
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.120
INFO
${RESULT} = {'cmd': 'gpio_set 6 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.123
INFO
${RESULT} = {'cmd': 'gpio_set 6 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.242
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.260
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.264
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.310
INFO
${RESULT} = {'cmd': 'gpio_clear 6 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.314
INFO
${RESULT} = {'cmd': 'gpio_clear 6 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.434
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.453
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.456
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Resets the device
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:53.520
INFO
Starting process: make reset
00:26:53.531
INFO
Waiting for process to complete.
00:26:54.807
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.811
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26
00:26:54.828
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:26 / 28.10.2021 - 00:26