Summary


Boardnucleo-f103rb
Testsuitetests_xtimer_benchmarks
Status
PASS
RIOT Version
2022.04-devel-147-g99d245f538
HIL Tests Version
8fe8d2d38b
Date / Time
26.01.202223:1800:04:53.555
100%

Log


Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:06.781
INFO
Starting process: make reset
23:18:06.804
INFO
Waiting for process to complete.
23:18:08.922
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:08.929
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:09.312
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Record the timer version
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:09.543
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:09.715
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:09.721
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:09.769
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:09.774
INFO
VALUE: xtimer
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:19
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the test application
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs a process and waits for it to complete.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:09.929
INFO
Starting process: make reset
23:18:09.954
INFO
Waiting for process to complete.
23:18:11.973
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:11.981
INFO
Slept 0 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:12.424
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:12.635
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the specified keyword multiple times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:12.766
INFO
Repeating keyword, round 1/20.
23:18:13.502
INFO
Repeating keyword, round 2/20.
23:18:14.239
INFO
Repeating keyword, round 3/20.
23:18:15.002
INFO
Repeating keyword, round 4/20.
23:18:15.788
INFO
Repeating keyword, round 5/20.
23:18:16.545
INFO
Repeating keyword, round 6/20.
23:18:17.287
INFO
Repeating keyword, round 7/20.
23:18:18.020
INFO
Repeating keyword, round 8/20.
23:18:18.754
INFO
Repeating keyword, round 9/20.
23:18:19.486
INFO
Repeating keyword, round 10/20.
23:18:20.150
INFO
Repeating keyword, round 11/20.
23:18:20.883
INFO
Repeating keyword, round 12/20.
23:18:21.639
INFO
Repeating keyword, round 13/20.
23:18:22.378
INFO
Repeating keyword, round 14/20.
23:18:23.115
INFO
Repeating keyword, round 15/20.
23:18:23.863
INFO
Repeating keyword, round 16/20.
23:18:24.618
INFO
Repeating keyword, round 17/20.
23:18:25.351
INFO
Repeating keyword, round 18/20.
23:18:26.084
INFO
Repeating keyword, round 19/20.
23:18:26.797
INFO
Repeating keyword, round 20/20.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:12.879
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:12.886
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:13.318
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028183264, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028183792, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:13.337
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028183264, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028183792, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:13.434
INFO
${GPIO_OVERHEAD} = {'time': [0.028183264, 0.028183792, 0.029198917, 0.029199444, 0.030215028, 0.030215556, 0.031231139, 0.031231667, 0.03224725, 0.032247778, 0.033263347, 0.033263875, 0.034279458, 0.034279986, 0.0352955...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:13.450
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:13.456
INFO
VALUE: [0, 5.279999999996399e-07, 0.0010151250000000021, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015582999999997, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:13.616
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:13.623
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.052
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028294389, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028294917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.072
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028294389, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028294917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.171
INFO
${GPIO_OVERHEAD} = {'time': [0.028294389, 0.028294917, 0.029310708, 0.029311236, 0.030326819, 0.030327347, 0.031342931, 0.031343458, 0.032359042, 0.032359569, 0.033375153, 0.033375681, 0.034391264, 0.034391792, 0.035407...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.186
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.193
INFO
VALUE: [0, 5.279999999996399e-07, 0.001015791000000002, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155839999999965, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.353
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.360
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.786
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028258542, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028259069, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.805
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028258542, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028259069, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.928
INFO
${GPIO_OVERHEAD} = {'time': [0.028258542, 0.028259069, 0.029274528, 0.029275056, 0.030290639, 0.030291167, 0.03130675, 0.031307278, 0.032322847, 0.032323375, 0.033338958, 0.033339486, 0.034355069, 0.034355597, 0.0353711...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.945
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:14.952
INFO
VALUE: [0, 5.270000000001662e-07, 0.0010154589999999998, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.269999999932273e-07, 0.0010155840000000069, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000073, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.122
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.129
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.594
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.031631875, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.031632403, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.614
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.031631875, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.031632403, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.713
INFO
${GPIO_OVERHEAD} = {'time': [0.031631875, 0.031632403, 0.032648194, 0.032648722, 0.033664306, 0.033664833, 0.034680417, 0.034680944, 0.035696528, 0.035697056, 0.036712639, 0.036713167, 0.03772875, 0.037729278, 0.0387448...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.734
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.741
INFO
VALUE: [0, 5.280000000065788e-07, 0.001015790999999995, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155829999999935, 5.280000000135177e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155699999999934, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.904
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:15.911
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:16.359
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.029734806, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.029735333, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:16.378
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.029734806, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.029735333, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:16.476
INFO
${GPIO_OVERHEAD} = {'time': [0.029734806, 0.029735333, 0.030750792, 0.030751319, 0.031766903, 0.031767431, 0.032783014, 0.032783542, 0.033799125, 0.033799653, 0.034815222, 0.03481575, 0.035831333, 0.035831861, 0.0368474...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:16.492
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:16.499
INFO
VALUE: [0, 5.270000000001662e-07, 0.0010154589999999998, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015583999999993, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000078, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:16.660
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:16.667
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.096
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028384833, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028385361, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.116
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028384833, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028385361, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.213
INFO
${GPIO_OVERHEAD} = {'time': [0.028384833, 0.028385361, 0.029400819, 0.029401347, 0.030416931, 0.030417458, 0.031433042, 0.031433569, 0.032449153, 0.032449681, 0.033465264, 0.033465792, 0.034481375, 0.034481903, 0.035497...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.229
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.236
INFO
VALUE: [0, 5.279999999996399e-07, 0.0010154580000000003, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.409999999997361e-07, 0.0010155699999999934, 5.280000000065788e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.0010155829999999935, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000074, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.401
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.407
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.835
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028244097, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028244625, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.853
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028244097, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028244625, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.950
INFO
${GPIO_OVERHEAD} = {'time': [0.028244097, 0.028244625, 0.029260417, 0.029260944, 0.030276528, 0.030277056, 0.031292639, 0.031293167, 0.03230875, 0.032309278, 0.033324861, 0.033325389, 0.034340958, 0.034341486, 0.0353570...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.966
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:17.973
INFO
VALUE: [0, 5.279999999996399e-07, 0.0010157920000000015, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.001015582999999997, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155840000000069, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.134
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.141
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.571
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028240861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028241389, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.589
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028240861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028241389, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.686
INFO
${GPIO_OVERHEAD} = {'time': [0.028240861, 0.028241389, 0.029257181, 0.029257708, 0.030273292, 0.030273819, 0.031289403, 0.031289931, 0.032305514, 0.032306042, 0.033321625, 0.033322153, 0.034337722, 0.03433825, 0.0353538...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.701
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.708
INFO
VALUE: [0, 5.279999999996399e-07, 0.0010157920000000015, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000078, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.868
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:18.875
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.302
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028119361, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028119889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.321
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028119361, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028119889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.417
INFO
${GPIO_OVERHEAD} = {'time': [0.028119361, 0.028119889, 0.029135014, 0.029135542, 0.030151111, 0.030151639, 0.031167222, 0.03116775, 0.032183333, 0.032183861, 0.033199444, 0.033199972, 0.034215556, 0.034216083, 0.0352316...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.433
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.439
INFO
VALUE: [0, 5.279999999996399e-07, 0.0010151250000000021, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.600
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.607
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.966
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028415458, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028415986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:19.985
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028415458, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028415986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.081
INFO
${GPIO_OVERHEAD} = {'time': [0.028415458, 0.028415986, 0.029431444, 0.029431972, 0.030447556, 0.030448083, 0.031463667, 0.031464194, 0.032479778, 0.032480306, 0.033495889, 0.033496417, 0.034512, 0.034512528, 0.035528111...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.097
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.103
INFO
VALUE: [0, 5.279999999996399e-07, 0.0010154580000000003, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155829999999935, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000078, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.264
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.270
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.698
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028323403, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028323931, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.716
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028323403, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028323931, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.813
INFO
${GPIO_OVERHEAD} = {'time': [0.028323403, 0.028323931, 0.029339389, 0.029339917, 0.0303555, 0.030356028, 0.031371611, 0.031372139, 0.032387722, 0.03238825, 0.033403833, 0.033404361, 0.034419944, 0.034420472, 0.035436056...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.828
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.835
INFO
VALUE: [0, 5.279999999996399e-07, 0.0010154580000000003, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000073, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:20.997
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.004
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.450
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028395111, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028395639, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.471
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.028395111, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.028395639, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.570
INFO
${GPIO_OVERHEAD} = {'time': [0.028395111, 0.028395639, 0.029411431, 0.029411958, 0.030427542, 0.030428069, 0.031443653, 0.031444181, 0.03245975, 0.032460278, 0.033475861, 0.033476389, 0.034491972, 0.0344925, 0.035508083...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.586
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.592
INFO
VALUE: [0, 5.279999999996399e-07, 0.001015791999999998, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.0010155840000000034, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.0010155829999999935, 5.280000000065788e-07, 0.001015568999999994, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155700000000004, 5.270000000001662e-07, 0.0010155840000000069, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155699999999934, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.754
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:21.760
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:22.188
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.029096528, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.029097056, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:22.206
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.029096528, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.029097056, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Only use with data containing dicts as follows:
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:22.304
INFO
${GPIO_OVERHEAD} = {'time': [0.029096528, 0.029097056, 0.030112847, 0.030113375, 0.031128958, 0.031129486, 0.032145069, 0.032145597, 0.033161181, 0.033161708, 0.034177278, 0.034177806, 0.035193389, 0.035193917, 0.036209...
Documentation: Adds the given property in output
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:22.320
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:22.327
INFO
VALUE: [0, 5.279999999996399e-07, 0.001015791000000002, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015582999999997, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.0010155700000000004, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155690000000009, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.001015568999999994, 5.279999999996399e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.270000000001662e-07, 0.001015584, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07, 0.0010155830000000005, 5.279999999996399e-07]
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Reset the PHiLIP MCU
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Resets the device
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:22.492
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 26.01.2022 - 23:18 / 26.01.2022 - 23:18
23:18:22.499
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}