Summary


Boardnucleo-f103rb
Testsuitetests_periph_i2c
Status
FAIL
RIOT Version
2022.07-devel-898-gd9fc082686
HIL Tests Version
8fe8d2d38b
Date / Time
28.06.202200:2900:00:55.052
94%

Log


Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:30
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests
Documentation: Verify basic functionality of the periph I2C API.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/01__periph_i2c_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:19.726
INFO
Starting process: make reset
00:29:19.759
INFO
Waiting for process to complete.
00:29:21.774
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:21.782
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:21.814
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify I2C acquire and release API calls.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:22.014
INFO
Starting process: make reset
00:29:22.041
INFO
Waiting for process to complete.
00:29:24.113
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:24.120
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:24.151
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:24.310
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:24.317
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:24.382
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:24.388
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify acquiring an I2C bus after release.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:24.473
INFO
Starting process: make reset
00:29:24.499
INFO
Waiting for process to complete.
00:29:26.517
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.525
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.560
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.733
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.739
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.803
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.810
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.874
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.881
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify that acquiring a locked I2C bus blocks.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:26.968
INFO
Starting process: make reset
00:29:26.994
INFO
Waiting for process to complete.
00:29:29.031
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:29.038
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:29.070
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:29.227
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:29.234
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:30.308
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:30.315
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_acquire(0)\n', 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify recovery of I2C bus after NACK.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:30.401
INFO
Starting process: make reset
00:29:30.422
INFO
Waiting for process to complete.
00:29:32.490
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.498
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.529
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.687
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.693
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.763
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.770
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.841
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Read byte from register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.848
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) from reg 0x00 : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.913
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:32.920
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify recovery of read bytes NACK.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:33.004
INFO
Starting process: make reset
00:29:33.029
INFO
Waiting for process to complete.
00:29:35.066
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.070
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.086
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.178
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.185
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.252
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.258
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2a, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.328
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from the I2C device.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.335
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x2b, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.405
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Read byte from the I2C device.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.412
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x00)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.478
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.485
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify pins are high after release.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:35.573
INFO
Starting process: make reset
00:29:35.599
INFO
Waiting for process to complete.
00:29:37.680
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.688
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.719
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.879
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.885
INFO
${RESULT} = {'cmd': 'i2c_acquire(0)', 'data': None, 'msg': 'i2c_0 acquired', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.936
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.939
INFO
${RESULT} = {'cmd': 'i2c_release(0)', 'data': None, 'msg': 'i2c_0 released', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.968
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.971
INFO
${RESULT} = {'cmd': ['read_reg(i2c.dut_sda.level,0,1)', ['read_bits(322,5,1)', 'rr 322 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:37.992
FAIL
0 != 1
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Data driven tests to verify the i2c_write_regs call.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/02__periph_i2c_write_register.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:38.474
INFO
Starting process: make reset
00:29:38.501
INFO
Waiting for process to complete.
00:29:40.529
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:40.537
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:40.568
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:40.780
INFO
Starting process: make reset
00:29:40.810
INFO
Waiting for process to complete.
00:29:42.832
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:42.840
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:42.881
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify bytes are written to a register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:43.101
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:43.108
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x29])', 'data': None, 'msg': 'i2c_0 wrote 1 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:43.176
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:43.183
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,1)', 'rr 0 1'], 'data': [41], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:43.306
INFO
Starting process: make reset
00:29:43.331
INFO
Waiting for process to complete.
00:29:45.337
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:45.345
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:45.383
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify bytes are written to a register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:45.593
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:45.600
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2a, 0x2b])', 'data': None, 'msg': 'i2c_0 wrote 2 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:45.670
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:45.677
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,2)', 'rr 0 2'], 'data': [42, 43], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:45.804
INFO
Starting process: make reset
00:29:45.831
INFO
Waiting for process to complete.
00:29:47.929
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:47.937
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:47.974
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify bytes are written to a register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:48.198
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Write byte to register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:48.205
INFO
${RESULT} = {'cmd': 'i2c_write_regs(0, 0x55, 0x00, 0x00, [0x2f, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38])', 'data': None, 'msg': 'i2c_0 wrote 10 bytes to reg 0x00', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:48.277
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:48.284
INFO
${RESULT} = {'cmd': ['read_reg(user_reg,0,10)', 'rr 0 10'], 'data': [47, 48, 49, 50, 51, 52, 53, 54, 55, 56], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Tests to verify correct error codes are given.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/03__periph_i2c_error_codes.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:48.844
INFO
Starting process: make reset
00:29:48.872
INFO
Waiting for process to complete.
00:29:50.788
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:50.796
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:50.823
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify address NACK (ENXIO) occurs
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:51.039
INFO
Starting process: make reset
00:29:51.069
INFO
Waiting for process to complete.
00:29:52.733
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:52.741
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:52.775
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:52.963
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:52.970
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x2a, 0x00, 0x00)', 'data': None, 'msg': 'ENXIO [6]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ${msg} is not in the last API message
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify data NACK (EIO) occurs
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:53.103
INFO
Starting process: make reset
00:29:53.130
INFO
Waiting for process to complete.
00:29:55.135
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:55.142
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:55.175
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not fail.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:55.390
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Read byte from register.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:55.397
INFO
${RESULT} = {'cmd': 'i2c_read_reg(0, 0x55, 0x00, 0x00)', 'data': None, 'msg': 'EIO [5]', 'result': 'Error'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ${msg} is not in the last API message
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Release to the I2C bus.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Tests split frame i2c flags.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:30
Source: /opt/jenkins/workspace/nightly/tests/periph_i2c/tests/04__periph_i2c_flags.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:55.938
INFO
Starting process: make reset
00:29:55.953
INFO
Waiting for process to complete.
00:29:57.939
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:57.947
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:57.979
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify DUT does not lockup if read_byte with NOSTOP
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:30
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:30
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:30
00:29:58.192
INFO
Starting process: make reset
00:29:58.218
INFO
Waiting for process to complete.
00:30:00.134
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
00:30:00.142
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
00:30:00.179
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
Documentation: Get access to the I2C bus.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
00:30:00.376
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x04)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}
Documentation: Read byte from the I2C device.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:30 / 28.06.2022 - 00:30
00:30:00.382
INFO
${RESULT} = {'cmd': 'i2c_read_byte(0, 0x55, 0x04)', 'data': [0], 'msg': 'i2c_0 read 1 byte(s) : [0x00]', 'result': 'Success'}