Summary


Boardnucleo-f091rc
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2023.01-devel-532-g945af26648
HIL Tests Version
5e18f75314
Date / Time
03.12.202223:2200:00:41.209
100%

Log


Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:02.820
INFO
Starting process: make reset
23:22:02.830
INFO
Waiting for process to complete.
23:22:04.012
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:04.017
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:04.030
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:04.132
INFO
Starting process: make reset
23:22:04.142
INFO
Waiting for process to complete.
23:22:05.301
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.305
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.320
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.408
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.412
INFO
${RESULT} = {'cmd': 'gpio_set 2 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.529
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.554
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.560
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.639
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.645
INFO
${RESULT} = {'cmd': 'gpio_clear 2 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.763
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.781
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.784
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(794,0,1)', 'rr 794 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:05.842
INFO
Starting process: make reset
23:22:05.851
INFO
Waiting for process to complete.
23:22:07.068
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.072
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.088
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.179
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.183
INFO
${RESULT} = {'cmd': 'gpio_set 2 8', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.307
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.330
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.335
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.391
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.395
INFO
${RESULT} = {'cmd': 'gpio_clear 2 8', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.512
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.529
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.532
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(798,0,1)', 'rr 798 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:07.590
INFO
Starting process: make reset
23:22:07.600
INFO
Waiting for process to complete.
23:22:08.806
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:08.810
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:08.826
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:08.926
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:08.932
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.061
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.078
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.081
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.138
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.141
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.258
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.274
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.277
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(802,0,1)', 'rr 802 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify if board to philip wiring is correct.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:09.601
INFO
Starting process: make reset
23:22:09.610
INFO
Waiting for process to complete.
23:22:10.766
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:10.769
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:10.783
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:10.885
INFO
Starting process: make reset
23:22:10.894
INFO
Waiting for process to complete.
23:22:12.122
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:12.126
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:12.142
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:12.211
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:12.260
INFO
Starting process: make reset
23:22:12.270
INFO
Waiting for process to complete.
23:22:13.471
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:13.474
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:13.491
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:13.563
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:13.633
INFO
Starting process: make reset
23:22:13.648
INFO
Waiting for process to complete.
23:22:14.850
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:14.853
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:14.870
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:14.959
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:14.962
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:14.995
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:14.998
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.027
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.030
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.064
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.069
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(670,2,2,1)', 'rr 670 1', 'wr 670 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.114
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.117
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.147
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.150
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.188
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.193
INFO
${RESULT} = {'cmd': 'gpio_set 0 9', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.319
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.341
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.345
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.396
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.399
INFO
${RESULT} = {'cmd': 'gpio_clear 0 9', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.516
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.533
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.536
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(670,5,1)', 'rr 670 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:15.592
INFO
Starting process: make reset
23:22:15.602
INFO
Waiting for process to complete.
23:22:16.793
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:16.797
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:16.812
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:16.907
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:16.912
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(668,1,1,1)', 'rr 668 1', 'wr 668 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:16.964
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:16.969
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.006
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.009
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.042
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.046
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(671,2,2,1)', 'rr 671 1', 'wr 671 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.080
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.084
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(668,0,1,0)', 'rr 668 1', 'wr 668 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.111
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.114
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.146
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.150
INFO
${RESULT} = {'cmd': 'gpio_set 0 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.266
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.282
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.286
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.327
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.330
INFO
${RESULT} = {'cmd': 'gpio_clear 0 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.446
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes the given keyword with the given arguments.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.463
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.467
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(671,5,1)', 'rr 671 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Fails if the given objects are unequal.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Executes all the given keywords in a sequence.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the PHiLIP MCU
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Resets the device
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Reset the test application
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Runs a process and waits for it to complete.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:17.523
INFO
Starting process: make reset
23:22:17.533
INFO
Waiting for process to complete.
23:22:18.758
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:18.762
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
23:22:18.777
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 03.12.2022 - 23:22 / 03.12.2022 - 23:22