Summary


Boardnrf52dk
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.07-devel-898-gd9fc082686
HIL Tests Version
8fe8d2d38b
Date / Time
28.06.202200:2800:01:09.434
100%

Log


Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:29
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:39.069
INFO
Starting process: make reset
00:28:39.096
INFO
Waiting for process to complete.
00:28:41.358
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:41.366
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:41.394
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:41.595
INFO
Starting process: make reset
00:28:41.623
INFO
Waiting for process to complete.
00:28:43.951
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:43.959
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:43.993
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.159
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.166
INFO
${RESULT} = {'cmd': 'gpio_set 0 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.304
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.335
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.343
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.428
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.434
INFO
${RESULT} = {'cmd': 'gpio_clear 0 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.575
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.605
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.612
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:44.717
INFO
Starting process: make reset
00:28:44.742
INFO
Waiting for process to complete.
00:28:47.023
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.030
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.063
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.234
INFO
${RESULT} = {'cmd': 'gpio_set 0 20', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.243
INFO
${RESULT} = {'cmd': 'gpio_set 0 20', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.381
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.412
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.418
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.502
INFO
${RESULT} = {'cmd': 'gpio_clear 0 20', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.509
INFO
${RESULT} = {'cmd': 'gpio_clear 0 20', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.645
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.676
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.683
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:47.789
INFO
Starting process: make reset
00:28:47.816
INFO
Waiting for process to complete.
00:28:50.112
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.120
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.152
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.324
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.331
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.468
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.498
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.505
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.587
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.595
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.732
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.763
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:50.770
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:29
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:51.375
INFO
Starting process: make reset
00:28:51.400
INFO
Waiting for process to complete.
00:28:53.665
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:53.673
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:53.702
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:53.893
INFO
Starting process: make reset
00:28:53.919
INFO
Waiting for process to complete.
00:28:56.209
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:56.217
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:56.249
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:56.392
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:56.481
INFO
Starting process: make reset
00:28:56.506
INFO
Waiting for process to complete.
00:28:58.837
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:58.845
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:58.877
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
00:28:59.016
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Resets the device
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:28
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:28 / 28.06.2022 - 00:29
00:28:59.122
INFO
Starting process: make reset
00:28:59.158
INFO
Waiting for process to complete.
00:29:01.456
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:01.465
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:01.500
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:01.638
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:01.731
INFO
Starting process: make reset
00:29:01.760
INFO
Waiting for process to complete.
00:29:04.039
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:04.048
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:04.080
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:04.221
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:04.312
INFO
Starting process: make reset
00:29:04.338
INFO
Waiting for process to complete.
00:29:06.631
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.639
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.671
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.842
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.849
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.916
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.923
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.981
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:06.987
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.053
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.061
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_nss.pull,1,0)', ['write_bits(389,2,2,1)', 'rr 389 1', 'wr 389 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.125
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.132
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.190
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.197
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.263
INFO
${RESULT} = {'cmd': 'gpio_set 0 22', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.270
INFO
${RESULT} = {'cmd': 'gpio_set 0 22', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.408
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.439
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.446
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.527
INFO
${RESULT} = {'cmd': 'gpio_clear 0 22', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.534
INFO
${RESULT} = {'cmd': 'gpio_clear 0 22', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.671
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.702
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.709
INFO
${RESULT} = {'cmd': ['read_reg(spi.dut_nss.level,0,1)', ['read_bits(389,5,1)', 'rr 389 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given objects are unequal.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the PHiLIP MCU
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Resets the device
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Reset the test application
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Runs a process and waits for it to complete.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:07.814
INFO
Starting process: make reset
00:29:07.841
INFO
Waiting for process to complete.
00:29:10.138
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.145
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.181
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.354
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.361
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.disable,1,0)', ['write_bits(384,1,1,1)', 'rr 384 1', 'wr 384 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.427
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.434
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.495
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.502
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.568
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.576
INFO
${RESULT} = {'cmd': ['write_reg(spi.dut_sck.pull,1,0)', ['write_bits(388,2,2,1)', 'rr 388 1', 'wr 388 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.641
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29
00:29:10.648
INFO
${RESULT} = {'cmd': ['write_reg(spi.mode.init,0,0)', ['write_bits(384,0,1,0)', 'rr 384 1', 'wr 384 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.06.2022 - 00:29 / 28.06.2022 - 00:29