Summary


Boardhifive1b
Testsuitetests_ztimer_benchmarks
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:1300:03:57.380
100%

Log


Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:17
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:53.192
INFO
Starting process: make reset
00:13:53.203
INFO
Waiting for process to complete.
00:13:54.262
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.267
INFO
Slept 3 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Resets the device
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.518
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Record the timer version
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Resets the device
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.673
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.781
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['ztimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.784
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['ztimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.815
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.818
INFO
VALUE: ztimer
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
Source: /opt/jenkins/workspace/nightly/tests/ztimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:13
00:13:57.901
INFO
Starting process: make reset
00:13:57.912
INFO
Waiting for process to complete.
00:13:58.970
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:13 / 28.10.2021 - 00:14
00:14:01.975
INFO
Slept 3 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.288
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.423
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the specified keyword multiple times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.514
INFO
Repeating keyword, round 1/20.
00:14:03.038
INFO
Repeating keyword, round 2/20.
00:14:03.577
INFO
Repeating keyword, round 3/20.
00:14:04.101
INFO
Repeating keyword, round 4/20.
00:14:04.630
INFO
Repeating keyword, round 5/20.
00:14:05.158
INFO
Repeating keyword, round 6/20.
00:14:05.716
INFO
Repeating keyword, round 7/20.
00:14:06.245
INFO
Repeating keyword, round 8/20.
00:14:06.773
INFO
Repeating keyword, round 9/20.
00:14:07.303
INFO
Repeating keyword, round 10/20.
00:14:07.833
INFO
Repeating keyword, round 11/20.
00:14:08.362
INFO
Repeating keyword, round 12/20.
00:14:08.887
INFO
Repeating keyword, round 13/20.
00:14:09.415
INFO
Repeating keyword, round 14/20.
00:14:09.946
INFO
Repeating keyword, round 15/20.
00:14:10.472
INFO
Repeating keyword, round 16/20.
00:14:10.998
INFO
Repeating keyword, round 17/20.
00:14:11.528
INFO
Repeating keyword, round 18/20.
00:14:12.056
INFO
Repeating keyword, round 19/20.
00:14:12.581
INFO
Repeating keyword, round 20/20.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.605
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.609
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.933
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017768819, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017768917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.943
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017768819, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017768917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:02.993
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.001
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.005
INFO
VALUE: [0, 9.799999999698938e-08, 0.0012160829999999997, 9.700000000098519e-08, 0.0010029720000000013, 9.800000000045883e-08, 0.001006916, 9.800000000045883e-08, 0.0010072499999999977, 9.700000000098519e-08, 0.0010069579999999988, 9.700000000098519e-08, 0.0010070980000000014, 9.699999999751574e-08, 0.0010070830000000024, 9.699999999751574e-08, 0.0010069860000000014, 9.800000000045883e-08, 0.001007110999999998, 9.700000000098519e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.001007112000000001, 9.700000000098519e-08, 0.0010070969999999985, 9.700000000098519e-08, 0.001007028, 0.0, 0.001007305999999996, 9.700000000445463e-08, 0.0010069580000000022, 8.299999999794583e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010070559999999992, 9.700000000445463e-08, 0.0010071389999999972, 9.700000000445463e-08, 0.0010069029999999965, 9.699999999751574e-08, 0.0010072500000000012, 9.700000000445463e-08, 0.001006999999999994, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.001007000000000001, 9.700000000445463e-08, 0.0010071669999999963, 9.699999999751574e-08, 0.0010070700000000057, 9.699999999751574e-08, 0.001007110999999998, 9.700000000445463e-08, 0.0010069729999999943, 9.700000000445463e-08, 0.001007082999999999, 9.699999999751574e-08, 0.001007000000000001, 9.800000000392828e-08, 0.0010071519999999973, 9.799999999698938e-08, 0.0010070410000000002, 9.700000000445463e-08, 0.001007000000000001, 9.799999999698938e-08, 0.0010070969999999985, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010071390000000041, 9.699999999751574e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010071670000000033, 9.699999999751574e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.001007110999999998, 9.799999999698938e-08, 0.0010070689999999993, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.001007110999999998, 9.699999999751574e-08, 0.0010070559999999992, 9.700000000445463e-08, 0.0010070559999999923, 9.700000000445463e-08, 0.0010070000000000079, 9.699999999057685e-08, 0.001007222000000002, 9.800000000392828e-08, 0.0010069439999999957, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.129
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.152
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.471
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017659681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017659778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.481
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.017659681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.017659778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.532
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.540
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.544
INFO
VALUE: [0, 9.700000000098519e-08, 0.0010339860000000006, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000098519e-08, 0.0010070140000000005, 9.700000000098519e-08, 0.0010070559999999992, 9.700000000098519e-08, 0.0010071249999999976, 9.700000000098519e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.0010070140000000005, 9.800000000045883e-08, 0.0010070969999999985, 9.700000000098519e-08, 0.001007097000000002, 9.699999999751574e-08, 0.0010070700000000023, 9.699999999751574e-08, 0.0010069860000000014, 9.700000000098519e-08, 0.0010071119999999975, 9.700000000098519e-08, 0.0010071110000000015, 9.699999999751574e-08, 0.0010071110000000015, 9.699999999751574e-08, 0.0010069870000000009, 9.700000000445463e-08, 0.0010070410000000002, 9.799999999698938e-08, 0.0010071389999999972, 9.700000000445463e-08, 0.001007028, 9.699999999751574e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.0010070839999999984, 9.700000000445463e-08, 0.0010071799999999964, 9.800000000392828e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.0010072500000000012, 9.699999999751574e-08, 0.0010069450000000021, 9.699999999751574e-08, 0.0010070689999999993, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010071390000000041, 9.699999999751574e-08, 0.001006888999999997, 9.700000000445463e-08, 0.0010072229999999946, 9.700000000445463e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010070689999999993, 9.800000000392828e-08, 0.0010070549999999998, 9.699999999751574e-08, 0.001007110999999998, 9.800000000392828e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010070689999999993, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010071249999999976, 9.800000000392828e-08, 0.001007082999999999, 9.699999999751574e-08, 0.0010070699999999988, 8.300000000488472e-08, 0.001006999999999994, 9.700000000445463e-08, 0.001007209000000002, 9.699999999751574e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010070700000000057, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.00100716599999999, 9.800000000392828e-08, 0.0010069580000000022, 9.700000000445463e-08, 0.0010071249999999976, 9.699999999057685e-08, 0.0010070419999999997, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.669
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.673
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:03.993
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018286056, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018286153, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.003
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018286056, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018286153, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.055
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.064
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.068
INFO
VALUE: [0, 9.700000000098519e-08, 0.0010232639999999994, 9.700000000098519e-08, 0.0010069579999999988, 9.700000000098519e-08, 0.0010070419999999997, 9.700000000098519e-08, 0.0010071390000000006, 9.699999999751574e-08, 0.0010070980000000014, 9.700000000098519e-08, 0.001007028, 9.699999999751574e-08, 0.0010070420000000031, 9.699999999751574e-08, 0.0010069860000000014, 9.700000000098519e-08, 0.0010072359999999982, 9.700000000098519e-08, 0.0010068890000000004, 9.800000000045883e-08, 0.0010071660000000003, 9.699999999751574e-08, 0.0010070700000000023, 9.699999999751574e-08, 0.001007028, 9.699999999751574e-08, 0.0010070700000000057, 9.699999999751574e-08, 0.0010070549999999998, 9.799999999698938e-08, 0.0010071250000000045, 9.699999999751574e-08, 0.001007082999999999, 9.700000000445463e-08, 0.001007028, 9.699999999751574e-08, 0.001007097999999998, 9.700000000445463e-08, 0.0010069299999999962, 9.800000000392828e-08, 0.001007193999999996, 9.700000000445463e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.001007292, 9.699999999751574e-08, 0.001006805999999999, 9.700000000445463e-08, 0.001007110999999998, 9.699999999751574e-08, 0.0010071530000000037, 9.699999999751574e-08, 0.001007000000000001, 9.800000000392828e-08, 0.001006999999999994, 9.700000000445463e-08, 0.0010071659999999968, 9.800000000392828e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010070549999999998, 9.799999999698938e-08, 0.0010070689999999993, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.001007111000000005, 9.699999999751574e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010070140000000005, 9.700000000445463e-08, 0.0010070839999999984, 9.699999999751574e-08, 0.0010071660000000038, 9.799999999698938e-08, 0.001006930000000003, 9.699999999751574e-08, 0.0010072230000000015, 9.699999999751574e-08, 0.0010068750000000043, 9.699999999751574e-08, 0.0010071249999999976, 9.700000000445463e-08, 0.0010071389999999972, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010070840000000053, 9.699999999057685e-08, 0.001007028000000007, 9.699999999057685e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010071529999999967, 9.700000000445463e-08, 0.0010070140000000005, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.194
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.198
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.519
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018186569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018186653, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.530
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018186569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018186653, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.582
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.592
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.596
INFO
VALUE: [0, 8.400000000088892e-08, 0.0010177780000000004, 9.699999999751574e-08, 0.0010070690000000028, 9.699999999751574e-08, 0.0010071669999999998, 9.700000000098519e-08, 0.0010069169999999995, 9.700000000098519e-08, 0.0010070559999999992, 9.700000000098519e-08, 0.0010071530000000002, 9.700000000098519e-08, 0.0010070689999999993, 9.800000000045883e-08, 0.0010068749999999974, 9.700000000098519e-08, 0.001007222000000002, 9.699999999751574e-08, 0.0010069730000000013, 9.700000000098519e-08, 0.0010069719999999983, 9.700000000098519e-08, 0.0010072499999999977, 9.700000000098519e-08, 0.0010070980000000014, 9.699999999751574e-08, 0.0010069440000000027, 9.799999999698938e-08, 0.0010071520000000042, 9.799999999698938e-08, 0.0010070689999999993, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010070689999999993, 9.800000000392828e-08, 0.0010071249999999976, 9.699999999751574e-08, 0.001006930000000003, 9.799999999698938e-08, 0.0010070969999999985, 8.300000000488472e-08, 0.0010070969999999985, 9.799999999698938e-08, 0.0010071800000000034, 9.699999999751574e-08, 0.0010069730000000013, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010071389999999972, 9.700000000445463e-08, 0.001007028, 9.699999999751574e-08, 0.0010071389999999972, 9.700000000445463e-08, 0.0010069859999999944, 9.700000000445463e-08, 0.0010071529999999967, 9.700000000445463e-08, 0.0010069449999999952, 9.700000000445463e-08, 0.0010071389999999972, 9.699999999751574e-08, 0.001007111000000005, 9.799999999698938e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010070140000000005, 9.700000000445463e-08, 0.0010071669999999963, 9.700000000445463e-08, 0.0010070410000000002, 9.799999999698938e-08, 0.0010070549999999998, 9.699999999751574e-08, 0.0010069730000000013, 9.700000000445463e-08, 0.0010071249999999976, 9.699999999751574e-08, 0.0010070699999999988, 9.700000000445463e-08, 0.0010071799999999964, 9.800000000392828e-08, 0.0010069579999999953, 9.700000000445463e-08, 0.0010071250000000045, 9.699999999057685e-08, 0.0010070000000000079, 9.799999999005049e-08, 0.0010070970000000123, 9.699999999057685e-08, 0.0010070969999999985, 9.700000000445463e-08, 0.0010070840000000053, 9.699999999057685e-08, 0.0010070560000000062, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.724
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:04.728
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.050
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019396681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019396778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.060
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019396681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019396778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.111
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.120
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.124
INFO
VALUE: [0, 9.700000000098519e-08, 0.0010267220000000007, 9.700000000098519e-08, 0.0010067639999999968, 9.700000000098519e-08, 0.0010071530000000002, 9.700000000098519e-08, 0.0010070699999999988, 9.700000000098519e-08, 0.0010070419999999997, 9.700000000098519e-08, 0.0010070689999999993, 8.400000000088892e-08, 0.0010071519999999973, 9.800000000045883e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.0010070700000000023, 9.700000000098519e-08, 0.0010070689999999993, 9.699999999751574e-08, 0.0010070140000000005, 9.800000000045883e-08, 0.0010071939999999995, 9.700000000445463e-08, 0.001007110999999998, 9.799999999698938e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.0010071530000000037, 9.699999999751574e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.0010070980000000049, 9.699999999751574e-08, 0.0010070969999999985, 9.700000000445463e-08, 0.0010070969999999985, 9.799999999698938e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010070410000000002, 9.800000000392828e-08, 0.0010071519999999973, 9.800000000392828e-08, 0.0010070270000000006, 9.799999999698938e-08, 0.001007082999999999, 9.700000000445463e-08, 0.0010069449999999952, 9.700000000445463e-08, 0.001007082999999999, 9.699999999751574e-08, 0.001007292, 9.700000000445463e-08, 0.0010069589999999948, 0.0, 0.0010070140000000005, 9.700000000445463e-08, 0.0010070689999999993, 9.699999999751574e-08, 0.0010071810000000028, 9.699999999751574e-08, 0.0010070969999999985, 9.800000000392828e-08, 0.0010070410000000002, 9.799999999698938e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010070549999999998, 9.800000000392828e-08, 0.0010071379999999977, 8.399999999741947e-08, 0.0010069440000000027, 9.699999999751574e-08, 0.0010072780000000003, 9.700000000445463e-08, 0.0010069449999999952, 9.700000000445463e-08, 0.0010071669999999963, 9.700000000445463e-08, 0.0010069719999999949, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.001007111000000005, 9.799999999005049e-08, 0.0010070690000000132, 9.699999999057685e-08, 0.001006916999999996, 9.700000000445463e-08, 0.0010072640000000077, 9.699999999057685e-08, 0.0010068750000000043, 9.700000000445463e-08, 0.001007208999999995, 9.700000000445463e-08, 0.0010069309999999887, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.258
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.263
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.607
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.020245986, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.020246083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.618
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.020245986, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.020246083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.669
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.678
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.682
INFO
VALUE: [0, 9.700000000098519e-08, 0.0010186389999999983, 9.700000000098519e-08, 0.0010067779999999998, 9.700000000098519e-08, 0.0010071529999999967, 9.700000000098519e-08, 0.0010070980000000014, 8.299999999794583e-08, 0.0010070690000000028, 9.799999999698938e-08, 0.0010070690000000028, 9.699999999751574e-08, 0.0010071530000000002, 9.700000000098519e-08, 0.0010069590000000017, 9.699999999751574e-08, 0.001007097000000002, 8.299999999794583e-08, 0.0010070980000000014, 9.700000000098519e-08, 0.0010069999999999975, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010070689999999993, 9.699999999751574e-08, 0.0010070980000000049, 9.699999999751574e-08, 0.001006930000000003, 9.799999999698938e-08, 0.0010072360000000016, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010070689999999993, 9.799999999698938e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.001007194000000003, 9.799999999698938e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010071669999999963, 9.700000000445463e-08, 0.0010069309999999956, 9.700000000445463e-08, 0.0010072640000000008, 9.699999999751574e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010069580000000022, 8.299999999794583e-08, 0.0010071120000000044, 9.699999999751574e-08, 0.001007110999999998, 9.700000000445463e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.001007028, 9.699999999751574e-08, 0.0010071390000000041, 9.699999999751574e-08, 0.0010070699999999988, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010071250000000045, 9.699999999751574e-08, 0.001007082999999999, 9.800000000392828e-08, 0.001006999999999994, 9.700000000445463e-08, 0.001007082999999999, 9.699999999751574e-08, 0.0010070840000000053, 9.699999999751574e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.0010071810000000028, 9.700000000445463e-08, 0.0010070139999999866, 9.700000000445463e-08, 0.0010070699999999988, 9.700000000445463e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010070549999999928, 9.800000000392828e-08, 0.0010070549999999928, 9.700000000445463e-08, 0.001007097999999998, 9.700000000445463e-08, 0.0010069860000000014, 9.699999999057685e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.809
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:05.813
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.134
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018152819, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018152917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.144
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018152819, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018152917, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.198
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.207
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.211
INFO
VALUE: [0, 9.800000000045883e-08, 0.0010009719999999993, 9.700000000098519e-08, 0.0010069449999999987, 9.700000000098519e-08, 0.001007082999999999, 9.700000000098519e-08, 0.0010070559999999992, 9.700000000098519e-08, 0.0010070559999999992, 9.700000000098519e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010071660000000003, 9.800000000045883e-08, 0.0010069860000000014, 9.700000000098519e-08, 0.0010069579999999988, 8.400000000088892e-08, 0.0010072499999999977, 9.700000000098519e-08, 0.0010070689999999993, 9.800000000045883e-08, 0.001007013000000001, 9.800000000045883e-08, 0.001007082999999999, 9.700000000098519e-08, 0.0010070969999999985, 9.799999999698938e-08, 0.001006930000000003, 9.699999999751574e-08, 0.0010071670000000033, 9.699999999751574e-08, 0.0010070559999999992, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010070140000000005, 9.700000000445463e-08, 0.0010072079999999956, 9.700000000445463e-08, 0.0010069309999999956, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010070689999999993, 9.800000000392828e-08, 0.001007012999999994, 9.800000000392828e-08, 0.001007222000000002, 9.699999999751574e-08, 0.0010069580000000022, 9.799999999698938e-08, 0.0010070969999999985, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010071390000000041, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010071249999999976, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010070689999999993, 9.800000000392828e-08, 0.0010070549999999998, 9.699999999751574e-08, 0.0010070839999999984, 9.700000000445463e-08, 0.001007082999999999, 9.799999999698938e-08, 0.0010071380000000046, 9.799999999698938e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.0010070699999999988, 9.700000000445463e-08, 0.0010070969999999985, 9.699999999751574e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010070980000000049, 9.699999999751574e-08, 0.001006999999999994, 9.700000000445463e-08, 0.0010071529999999967, 9.700000000445463e-08, 0.0010069860000000014, 9.700000000445463e-08, 0.001007097999999998, 9.699999999057685e-08, 0.0010070970000000123, 9.699999999057685e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.339
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.343
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.665
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018742583, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018742681, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.675
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018742583, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018742681, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.727
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.736
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.739
INFO
VALUE: [0, 9.800000000045883e-08, 0.0010140969999999985, 9.700000000098519e-08, 0.0010069579999999988, 8.400000000088892e-08, 0.0010070549999999998, 9.700000000098519e-08, 0.0010070559999999992, 9.700000000098519e-08, 0.0010072640000000008, 0.0, 0.0010069579999999988, 9.800000000045883e-08, 0.0010071799999999999, 9.700000000098519e-08, 0.0010069999999999975, 9.800000000045883e-08, 0.001007125000000001, 9.700000000098519e-08, 0.001007013999999997, 9.700000000098519e-08, 0.0010071110000000015, 9.699999999751574e-08, 0.0010070140000000005, 9.700000000098519e-08, 0.0010071950000000024, 9.699999999751574e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010069029999999965, 9.699999999751574e-08, 0.001007209000000002, 9.700000000445463e-08, 0.001007028, 8.299999999794583e-08, 0.0010071249999999976, 9.700000000445463e-08, 0.0010069029999999965, 9.699999999751574e-08, 0.0010072500000000012, 9.700000000445463e-08, 0.001006999999999994, 8.400000000435837e-08, 0.0010070410000000002, 9.799999999698938e-08, 0.001007194000000003, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010069859999999944, 9.800000000392828e-08, 0.0010071519999999973, 9.800000000392828e-08, 0.0010071519999999973, 9.799999999698938e-08, 0.0010068750000000043, 9.699999999751574e-08, 0.0010070410000000002, 9.800000000392828e-08, 0.0010071249999999976, 9.699999999751574e-08, 0.001007194000000003, 9.799999999698938e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.0010070689999999993, 9.800000000392828e-08, 0.0010070689999999993, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010071669999999963, 9.700000000445463e-08, 0.001006999999999994, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010071250000000045, 9.699999999751574e-08, 0.001007097999999998, 8.300000000488472e-08, 0.0010069859999999944, 9.700000000445463e-08, 0.0010070559999999992, 8.299999999794583e-08, 0.0010071949999999955, 9.700000000445463e-08, 0.0010069860000000014, 9.700000000445463e-08, 0.0010069590000000017, 9.699999999057685e-08, 0.0010072080000000094, 9.699999999057685e-08, 0.0010070699999999988, 9.700000000445463e-08, 0.0010070279999999932, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.868
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:06.871
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.193
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019445514, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019445611, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.203
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019445514, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019445611, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.257
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.266
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.269
INFO
VALUE: [0, 9.700000000098519e-08, 0.0010024719999999973, 9.800000000045883e-08, 0.0010069020000000005, 9.800000000045883e-08, 0.0010071799999999999, 9.700000000098519e-08, 0.0010070559999999992, 9.700000000098519e-08, 0.001007013999999997, 9.700000000098519e-08, 0.0010071110000000015, 9.800000000045883e-08, 0.0010070410000000002, 9.699999999751574e-08, 0.001007209000000002, 9.699999999751574e-08, 0.0010068470000000017, 9.700000000098519e-08, 0.0010071249999999976, 9.800000000045883e-08, 0.001007097000000002, 9.699999999751574e-08, 0.0010069450000000021, 9.699999999751574e-08, 0.0010072910000000004, 9.800000000392828e-08, 0.0010068749999999974, 9.699999999751574e-08, 0.0010071250000000045, 9.699999999751574e-08, 0.0010070969999999985, 9.800000000392828e-08, 0.0010070689999999993, 9.699999999751574e-08, 0.0010069860000000014, 9.799999999698938e-08, 0.0010072080000000025, 9.699999999751574e-08, 0.0010069720000000018, 9.800000000392828e-08, 0.0010070549999999998, 9.699999999751574e-08, 0.0010071389999999972, 9.700000000445463e-08, 0.001007097999999998, 9.699999999751574e-08, 0.0010069580000000022, 9.699999999751574e-08, 0.0010070980000000049, 9.699999999751574e-08, 0.0010069720000000018, 9.699999999751574e-08, 0.0010071250000000045, 9.799999999698938e-08, 0.0010071249999999976, 9.700000000445463e-08, 0.0010070549999999998, 9.799999999698938e-08, 0.0010070689999999993, 9.700000000445463e-08, 0.0010070139999999936, 9.700000000445463e-08, 0.001007097999999998, 9.700000000445463e-08, 0.001007082999999999, 9.699999999751574e-08, 0.0010071389999999972, 9.700000000445463e-08, 0.0010069029999999965, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010072360000000016, 9.699999999751574e-08, 0.0010069730000000013, 9.699999999751574e-08, 0.0010070830000000058, 9.699999999751574e-08, 0.001007000000000001, 9.799999999698938e-08, 0.0010070970000000054, 8.299999999794583e-08, 0.0010071529999999967, 9.700000000445463e-08, 0.0010070279999999932, 9.700000000445463e-08, 0.0010070699999999988, 9.700000000445463e-08, 0.001006930000000003, 9.799999999005049e-08, 0.001007305, 9.700000000445463e-08, 0.001006888999999997, 9.800000000392828e-08, 0.0010071519999999973, 9.800000000392828e-08, 0.0010070689999999993, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.397
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.400
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.724
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018157486, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018157583, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.734
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018157486, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018157583, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.786
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.796
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.799
INFO
VALUE: [0, 9.700000000098519e-08, 0.0009979999999999989, 9.800000000045883e-08, 0.001006916, 9.699999999751574e-08, 0.001007125000000001, 9.800000000045883e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.001007097000000002, 9.700000000098519e-08, 0.0010069449999999987, 9.700000000098519e-08, 0.0010072639999999973, 9.700000000098519e-08, 0.001007000000000001, 9.700000000098519e-08, 0.001007028, 9.699999999751574e-08, 0.001007112000000001, 9.700000000098519e-08, 0.0010070969999999985, 9.700000000098519e-08, 0.001007028, 8.299999999794583e-08, 0.0010070980000000014, 9.700000000098519e-08, 0.0010070689999999959, 9.700000000445463e-08, 0.0010069730000000013, 9.699999999751574e-08, 0.0010071529999999967, 9.700000000445463e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010070140000000005, 9.699999999751574e-08, 0.0010072360000000016, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010070840000000053, 9.699999999751574e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010071799999999964, 9.799999999698938e-08, 0.0010069860000000014, 9.700000000445463e-08, 0.0010070969999999985, 9.699999999751574e-08, 0.0010070559999999992, 9.700000000445463e-08, 0.0010069719999999949, 9.800000000392828e-08, 0.001007193999999996, 9.700000000445463e-08, 0.001007000000000001, 8.399999999741947e-08, 0.0010070689999999993, 9.699999999751574e-08, 0.0010071670000000033, 9.699999999751574e-08, 0.0010068890000000039, 9.699999999751574e-08, 0.0010072230000000015, 9.699999999751574e-08, 0.0010069030000000034, 9.699999999751574e-08, 0.0010070549999999998, 9.800000000392828e-08, 0.0010071379999999977, 8.399999999741947e-08, 0.0010070830000000058, 9.699999999751574e-08, 0.001007097999999998, 9.700000000445463e-08, 0.001007082999999999, 9.699999999751574e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010071530000000037, 8.299999999794583e-08, 0.0010069450000000021, 9.699999999751574e-08, 0.0010071530000000037, 9.700000000445463e-08, 0.0010069309999999887, 9.700000000445463e-08, 0.001007194000000003, 9.700000000445463e-08, 0.0010070139999999866, 9.800000000392828e-08, 0.001007111000000005, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.927
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:07.930
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.252
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018786153, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01878625, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.262
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018786153, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01878625, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.315
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.324
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.328
INFO
VALUE: [0, 9.700000000098519e-08, 0.001004708, 9.800000000045883e-08, 0.001006901999999997, 9.800000000045883e-08, 0.001007097000000002, 9.700000000098519e-08, 0.0010070689999999993, 9.800000000045883e-08, 0.0010071249999999976, 0.0, 0.0010070410000000002, 9.800000000045883e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.0010071799999999999, 9.800000000045883e-08, 0.001007000000000001, 9.700000000098519e-08, 0.001007082999999999, 9.700000000098519e-08, 0.0010070559999999992, 9.700000000098519e-08, 0.0010071809999999994, 9.700000000098519e-08, 0.0010069309999999956, 9.700000000445463e-08, 0.0010071659999999968, 9.800000000392828e-08, 0.0010070549999999998, 9.699999999751574e-08, 0.0010070559999999992, 9.700000000445463e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010071389999999972, 9.700000000445463e-08, 0.0010070559999999992, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010070969999999985, 9.700000000445463e-08, 0.001007028, 9.699999999751574e-08, 0.0010071529999999967, 9.700000000445463e-08, 0.0010069309999999956, 9.700000000445463e-08, 0.001007082999999999, 9.799999999698938e-08, 0.0010072360000000016, 9.699999999751574e-08, 0.001007000000000001, 9.700000000445463e-08, 0.0010069719999999949, 9.800000000392828e-08, 0.0010072079999999956, 9.700000000445463e-08, 0.001007000000000001, 9.699999999751574e-08, 0.0010070559999999992, 9.700000000445463e-08, 0.0010071249999999976, 9.699999999751574e-08, 0.0010069030000000034, 9.699999999751574e-08, 0.0010071670000000033, 9.699999999751574e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010069860000000014, 9.700000000445463e-08, 0.001007208999999995, 9.700000000445463e-08, 0.0010069579999999953, 9.800000000392828e-08, 0.0010070549999999998, 9.699999999751574e-08, 0.0010071530000000037, 9.699999999751574e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010069720000000018, 9.700000000445463e-08, 0.0010071249999999976, 9.800000000392828e-08, 0.001007082999999992, 9.700000000445463e-08, 0.0010070279999999932, 9.700000000445463e-08, 0.0010071950000000024, 9.700000000445463e-08, 0.0010070140000000005, 9.699999999057685e-08, 0.0010069860000000014, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.454
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.458
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.778
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018196458, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018196556, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.788
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018196458, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018196556, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.840
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.849
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.853
INFO
VALUE: [0, 9.800000000045883e-08, 0.001012680000000002, 9.699999999751574e-08, 0.0010068890000000004, 9.700000000098519e-08, 0.001007125000000001, 9.800000000045883e-08, 0.001006888999999997, 9.700000000098519e-08, 0.0010071390000000006, 9.700000000098519e-08, 0.0010070969999999985, 9.700000000098519e-08, 0.0010071669999999998, 9.700000000098519e-08, 0.001007013999999997, 9.700000000098519e-08, 0.0010071110000000015, 9.800000000045883e-08, 0.0010070549999999998, 9.699999999751574e-08, 0.001006903, 9.700000000098519e-08, 0.0010071809999999994, 9.700000000098519e-08, 0.0010069999999999975, 9.700000000445463e-08, 0.0010071669999999963, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.0010071250000000045, 9.799999999698938e-08, 0.0010070270000000006, 9.799999999698938e-08, 0.0010071520000000042, 9.799999999698938e-08, 0.0010069160000000035, 9.699999999751574e-08, 0.0010071810000000028, 9.699999999751574e-08, 0.0010069860000000014, 9.799999999698938e-08, 0.0010070549999999998, 9.700000000445463e-08, 0.0010070839999999984, 9.699999999751574e-08, 0.0010070970000000054, 9.699999999751574e-08, 0.0010069860000000014, 9.799999999698938e-08, 0.001007222000000002, 9.699999999751574e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010072230000000015, 9.699999999751574e-08, 0.0010068890000000039, 9.699999999751574e-08, 0.001007082999999999, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.001007028, 9.699999999751574e-08, 0.0010071950000000024, 9.699999999751574e-08, 0.0010069030000000034, 9.699999999751574e-08, 0.0010072500000000012, 9.699999999751574e-08, 0.0010071670000000033, 0.0, 0.001006930000000003, 9.699999999751574e-08, 0.0010071950000000024, 9.699999999751574e-08, 0.0010070969999999985, 9.800000000392828e-08, 0.0010069719999999949, 8.300000000488472e-08, 0.0010070559999999923, 9.700000000445463e-08, 0.0010071249999999976, 9.700000000445463e-08, 0.001007082999999992, 9.800000000392828e-08, 0.001006930000000003, 9.700000000445463e-08, 0.001007208999999995, 9.700000000445463e-08, 0.0010070559999999923, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.980
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:08.983
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:09.304
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018204389, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018204486, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:09.315
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018204389, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018204486, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:09.368
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:09.377
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:09.381
INFO
VALUE: [0, 9.699999999751574e-08, 0.0010101390000000002, 9.700000000098519e-08, 0.0010068890000000004, 9.700000000098519e-08, 0.0010070839999999984, 9.700000000098519e-08, 0.0010071669999999998, 9.700000000098519e-08, 0.0010069579999999988, 9.700000000098519e-08, 0.0010071249999999976, 9.800000000045883e-08, 0.0010070689999999993, 9.700000000098519e-08, 0.0010070840000000018, 9.699999999751574e-08, 0.0010069860000000014, 9.700000000098519e-08, 0.0010071249999999976, 9.700000000098519e-08, 0.0010069730000000013, 9.699999999751574e-08, 0.001007097000000002, 9.700000000098519e-08, 0.0010070559999999958, 9.700000000445463e-08, 0.0010071529999999967, 9.700000000445463e-08, 0.0010070689999999993, 9.799999999698938e-08, 0.0010068890000000039, 9.699999999751574e-08, 0.001007193999999996, 9.700000000445463e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010070419999999997, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.001007110999999998, 9.700000000445463e-08, 0.0010071669999999963, 9.700000000445463e-08, 0.0010070699999999988, 9.699999999751574e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.001007000000000001, 9.700000000445463e-08, 0.0010072229999999946, 9.700000000445463e-08, 0.0010069439999999957, 9.700000000445463e-08, 0.001006916999999996, 9.700000000445463e-08, 0.0010073479999999982, 9.699999999751574e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.0010069720000000018, 9.800000000392828e-08, 0.0010071379999999977, 9.799999999698938e-08, 0.0010071520000000042, 9.799999999698938e-08, 0.0010068750000000043, 9.699999999751574e-08, 0.0010072780000000003, 9.699999999751574e-08, 0.001007028, 9.700000000445463e-08, 0.001006999999999994, 9.700000000445463e-08, 0.0010070419999999997, 9.699999999751574e-08, 0.0010070689999999993, 9.800000000392828e-08, 0.0010069860000000014, 9.699999999751574e-08, 0.001007193999999996, 9.800000000392828e-08, 0.0010069440000000027, 9.699999999751574e-08, 0.0010071950000000024, 9.699999999751574e-08, 0.0010070140000000005, 9.700000000445463e-08, 0.001007110999999991, 9.700000000445463e-08, 0.0010070559999999923, 9.700000000445463e-08, 0.0010070560000000062, 9.699999999057685e-08, 0.001007111000000005, 9.700000000445463e-08, 0.0010070559999999923, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Resets the device
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:09.509
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:14 / 28.10.2021 - 00:14
00:14:09.513
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.