Summary


Boardhifive1b
Testsuitetests_xtimer_benchmarks
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:1800:03:51.819
100%

Log


Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:22
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:27.018
INFO
Starting process: make reset
00:18:27.029
INFO
Waiting for process to complete.
00:18:28.072
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.077
INFO
Slept 3 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.324
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Record the timer version
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.474
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.591
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.594
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.620
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.623
INFO
VALUE: xtimer
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:19
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:31.706
INFO
Starting process: make reset
00:18:31.717
INFO
Waiting for process to complete.
00:18:32.762
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:35.768
INFO
Slept 3 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.080
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.222
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the specified keyword multiple times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.317
INFO
Repeating keyword, round 1/20.
00:18:36.851
INFO
Repeating keyword, round 2/20.
00:18:37.377
INFO
Repeating keyword, round 3/20.
00:18:37.900
INFO
Repeating keyword, round 4/20.
00:18:38.431
INFO
Repeating keyword, round 5/20.
00:18:38.958
INFO
Repeating keyword, round 6/20.
00:18:39.481
INFO
Repeating keyword, round 7/20.
00:18:40.008
INFO
Repeating keyword, round 8/20.
00:18:40.536
INFO
Repeating keyword, round 9/20.
00:18:41.060
INFO
Repeating keyword, round 10/20.
00:18:41.589
INFO
Repeating keyword, round 11/20.
00:18:42.117
INFO
Repeating keyword, round 12/20.
00:18:42.641
INFO
Repeating keyword, round 13/20.
00:18:43.165
INFO
Repeating keyword, round 14/20.
00:18:43.694
INFO
Repeating keyword, round 15/20.
00:18:44.219
INFO
Repeating keyword, round 16/20.
00:18:44.742
INFO
Repeating keyword, round 17/20.
00:18:45.272
INFO
Repeating keyword, round 18/20.
00:18:45.798
INFO
Repeating keyword, round 19/20.
00:18:46.323
INFO
Repeating keyword, round 20/20.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.408
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.412
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.740
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018371361, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018371458, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.751
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018371361, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018371458, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.804
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.0011246529999999998, 9.700000000098519e-08, 0.0009732920000000006, 9.699999999751574e-08, 0.0009765000000000017, 9.699999999751574e-08, 0.000976653000000001, 9.70...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.813
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.817
INFO
VALUE: [0, 9.700000000098519e-08, 0.0011246529999999998, 9.700000000098519e-08, 0.0009732920000000006, 9.699999999751574e-08, 0.0009765000000000017, 9.699999999751574e-08, 0.000976653000000001, 9.700000000098519e-08, 0.0009764869999999981, 9.700000000098519e-08, 0.0009764579999999995, 9.700000000098519e-08, 0.0009765699999999995, 9.700000000098519e-08, 0.0009766940000000002, 9.800000000045883e-08, 0.0009764019999999977, 9.800000000045883e-08, 0.0009765550000000005, 9.700000000098519e-08, 0.0009765420000000004, 9.699999999751574e-08, 0.0009765420000000004, 9.700000000098519e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.000976569999999996, 9.700000000445463e-08, 0.0009764439999999999, 9.799999999698938e-08, 0.0009765410000000044, 9.799999999698938e-08, 0.000976638000000002, 9.799999999698938e-08, 0.0009763750000000015, 9.699999999751574e-08, 0.0009766940000000002, 9.800000000392828e-08, 0.0009764859999999986, 9.699999999751574e-08, 0.000976653000000001, 9.700000000445463e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.0009766120000000017, 9.699999999751574e-08, 0.0009764999999999982, 9.700000000445463e-08, 0.0009765829999999961, 9.800000000392828e-08, 0.0009765689999999966, 8.300000000488472e-08, 0.0009764729999999985, 9.699999999751574e-08, 0.000976653000000001, 9.699999999751574e-08, 0.0009764030000000007, 9.700000000445463e-08, 0.0009766940000000002, 9.699999999751574e-08, 0.0009764999999999982, 9.800000000392828e-08, 0.0009764999999999982, 9.699999999751574e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765000000000051, 9.699999999751574e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009765279999999973, 9.699999999751574e-08, 0.0009765840000000026, 9.699999999751574e-08, 0.000976472000000006, 9.699999999751574e-08, 0.0009765840000000026, 9.699999999751574e-08, 0.000976666000000001, 9.799999999698938e-08, 0.0009764020000000012, 9.799999999698938e-08, 0.0009765270000000048, 9.799999999698938e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764160000000008, 9.800000000392828e-08, 0.0009765409999999974, 9.800000000392828e-08, 0.0009766110000000022, 9.699999999057685e-08, 0.0009766530000000079, 9.699999999057685e-08, 0.0009765420000000108, 8.299999999794583e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.943
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:36.947
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.268
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018458375, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018458472, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.278
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018458375, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018458472, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.331
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.0009864859999999982, 9.800000000045883e-08, 0.0009614720000000014, 9.700000000098519e-08, 0.0009764859999999986, 9.700000000098519e-08, 0.000976638999999998, 9.70...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.340
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.343
INFO
VALUE: [0, 9.700000000098519e-08, 0.0009864859999999982, 9.800000000045883e-08, 0.0009614720000000014, 9.700000000098519e-08, 0.0009764859999999986, 9.700000000098519e-08, 0.000976638999999998, 9.700000000098519e-08, 0.0009764870000000016, 9.699999999751574e-08, 0.0009765550000000005, 9.800000000045883e-08, 0.0009765550000000005, 9.700000000098519e-08, 0.0009763609999999985, 9.800000000045883e-08, 0.0009767079999999997, 9.700000000098519e-08, 0.0009764449999999994, 9.700000000098519e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.0009765280000000008, 9.700000000098519e-08, 0.0009764999999999982, 9.700000000098519e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764030000000007, 9.699999999751574e-08, 0.000976653000000001, 9.699999999751574e-08, 0.0009764860000000056, 9.799999999698938e-08, 0.0009766520000000015, 9.799999999698938e-08, 0.0009764020000000012, 9.800000000392828e-08, 0.0009765689999999966, 9.699999999751574e-08, 0.0009765140000000047, 9.699999999751574e-08, 0.0009766250000000018, 9.799999999698938e-08, 0.000976555000000004, 9.699999999751574e-08, 0.000976458999999999, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.0009767219999999993, 9.800000000392828e-08, 0.0009764439999999999, 9.699999999751574e-08, 0.0009765420000000039, 9.699999999751574e-08, 0.0009765559999999965, 9.700000000445463e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.0009766949999999996, 9.700000000445463e-08, 0.0009765559999999965, 9.700000000445463e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.000976569999999996, 9.700000000445463e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009765689999999966, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009764449999999994, 9.700000000445463e-08, 0.0009765969999999957, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.000976653000000001, 9.700000000445463e-08, 0.0009764859999999986, 9.799999999698938e-08, 0.0009764020000000012, 9.800000000392828e-08, 0.0009765969999999957, 9.700000000445463e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009766670000000005, 9.699999999057685e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.468
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.472
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.792
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018001903, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018002, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.802
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018001903, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018002, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.854
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.000959485999999999, 0.0, 0.0009763059999999997, 9.700000000098519e-08, 0.0009766249999999983, 9.700000000098519e-08, 0.0009764719999999991, 9.800000000045883e-08,...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.863
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.866
INFO
VALUE: [0, 9.700000000098519e-08, 0.000959485999999999, 0.0, 0.0009763059999999997, 9.700000000098519e-08, 0.0009766249999999983, 9.700000000098519e-08, 0.0009764719999999991, 9.800000000045883e-08, 0.0009766800000000006, 9.700000000098519e-08, 0.0009766109999999988, 9.800000000045883e-08, 0.0009762910000000007, 9.800000000045883e-08, 0.0009766800000000006, 9.699999999751574e-08, 0.0009765420000000004, 9.700000000098519e-08, 0.0009764999999999982, 9.700000000098519e-08, 0.0009765280000000008, 9.700000000098519e-08, 0.0009765139999999978, 9.800000000045883e-08, 0.000976666000000001, 9.699999999751574e-08, 0.0009765980000000021, 9.699999999751574e-08, 0.0009764170000000003, 9.700000000445463e-08, 0.0009764859999999986, 9.699999999751574e-08, 0.000976583000000003, 9.799999999698938e-08, 0.0009765970000000027, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009764859999999986, 9.700000000445463e-08, 0.0009765969999999957, 9.800000000392828e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009765970000000027, 9.699999999751574e-08, 0.0009764030000000007, 9.699999999751574e-08, 0.0009766670000000005, 9.700000000445463e-08, 0.000976652999999994, 9.700000000445463e-08, 0.0009764719999999991, 9.799999999698938e-08, 0.0009764719999999991, 9.700000000445463e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764999999999982, 9.700000000445463e-08, 0.0009765559999999965, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009764860000000056, 9.699999999751574e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.0009766949999999996, 9.699999999751574e-08, 0.0009764300000000004, 9.799999999698938e-08, 0.000976583000000003, 9.699999999751574e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009764030000000007, 9.699999999751574e-08, 0.0009765560000000034, 9.699999999751574e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.000976487000000005, 9.699999999751574e-08, 0.0009765970000000027, 9.699999999751574e-08, 0.0009765140000000047, 9.699999999057685e-08, 0.0009765840000000026, 9.700000000445463e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.0009765689999999966, 9.800000000392828e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.991
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:37.995
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.318
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018248986, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018249083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.329
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018248986, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018249083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.383
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.000960403000000002, 9.699999999751574e-08, 0.000976750000000002, 9.800000000045883e-08, 0.0009764159999999973, 9.700000000098519e-08, 0.000976583999999999, 9.7000...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.392
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.396
INFO
VALUE: [0, 9.700000000098519e-08, 0.000960403000000002, 9.699999999751574e-08, 0.000976750000000002, 9.800000000045883e-08, 0.0009764159999999973, 9.700000000098519e-08, 0.000976583999999999, 9.700000000098519e-08, 0.0009765280000000008, 9.700000000098519e-08, 0.0009764029999999972, 9.700000000098519e-08, 0.0009767219999999993, 9.700000000098519e-08, 0.0009765420000000004, 9.700000000098519e-08, 0.0009764449999999994, 9.700000000098519e-08, 0.0009766249999999983, 9.700000000098519e-08, 0.0009765969999999992, 9.800000000045883e-08, 0.0009764160000000008, 9.799999999698938e-08, 0.000976638000000002, 9.800000000045883e-08, 0.0009765409999999974, 9.800000000392828e-08, 0.0009764439999999999, 9.699999999751574e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009764170000000003, 9.699999999751574e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009767089999999992, 9.700000000445463e-08, 0.0009763750000000015, 9.699999999751574e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764449999999994, 9.699999999751574e-08, 0.0009766390000000014, 9.700000000445463e-08, 0.0009764719999999991, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009764719999999991, 9.700000000445463e-08, 0.0009767089999999992, 9.699999999751574e-08, 0.0009763470000000024, 9.699999999751574e-08, 0.0009767369999999984, 9.700000000445463e-08, 0.0009764300000000004, 9.799999999698938e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.000976554999999997, 9.800000000392828e-08, 0.0009764300000000004, 9.699999999751574e-08, 0.0009765980000000021, 9.699999999751574e-08, 0.0009765420000000039, 9.699999999751574e-08, 0.000976666000000001, 9.799999999698938e-08, 0.0009764300000000004, 9.700000000445463e-08, 0.0009766119999999948, 9.700000000445463e-08, 0.0009766109999999953, 9.700000000445463e-08, 0.0009764170000000003, 9.699999999751574e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009764859999999986, 9.800000000392828e-08, 0.0009765689999999966, 9.700000000445463e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009763470000000024, 9.799999999005049e-08, 0.0009767910000000046, 9.700000000445463e-08, 0.0009765839999999887, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.523
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.527
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.849
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019256861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019256958, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.859
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.019256861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.019256958, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.911
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.0009495139999999985, 9.700000000098519e-08, 0.000976556, 9.700000000098519e-08, 0.000976666999999997, 9.700000000098519e-08, 0.000976361000000002, 9.6999999997515...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.920
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:38.924
INFO
VALUE: [0, 9.700000000098519e-08, 0.0009495139999999985, 9.700000000098519e-08, 0.000976556, 9.700000000098519e-08, 0.000976666999999997, 9.700000000098519e-08, 0.000976361000000002, 9.699999999751574e-08, 0.0009766670000000005, 9.700000000098519e-08, 0.0009765139999999978, 9.700000000098519e-08, 0.0009765140000000012, 9.800000000045883e-08, 0.0009765829999999996, 9.700000000098519e-08, 0.0009765829999999996, 9.800000000045883e-08, 0.0009765269999999979, 9.800000000045883e-08, 0.000976569, 9.700000000098519e-08, 0.0009765139999999978, 9.700000000098519e-08, 0.0009764999999999982, 9.800000000392828e-08, 0.0009765969999999957, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.000976472000000006, 9.799999999698938e-08, 0.0009766940000000002, 9.699999999751574e-08, 0.0009764309999999998, 9.700000000445463e-08, 0.0009764999999999982, 9.699999999751574e-08, 0.0009767229999999988, 9.700000000445463e-08, 0.0009764999999999982, 8.299999999794583e-08, 0.000976653000000001, 9.700000000445463e-08, 0.000976360999999995, 9.700000000445463e-08, 0.0009765839999999956, 9.700000000445463e-08, 0.0009766109999999953, 9.700000000445463e-08, 0.0009764859999999986, 9.799999999698938e-08, 0.0009765270000000048, 9.799999999698938e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009763190000000033, 9.799999999698938e-08, 0.0009766940000000002, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009765000000000051, 9.699999999751574e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009766120000000017, 9.699999999751574e-08, 0.0009763750000000015, 9.699999999751574e-08, 0.0009766670000000005, 9.700000000445463e-08, 0.0009764999999999982, 9.699999999751574e-08, 0.0009765420000000039, 9.699999999751574e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.000976681, 9.700000000445463e-08, 0.0009764029999999937, 9.700000000445463e-08, 0.0009767219999999993, 9.799999999698938e-08, 0.0009765000000000051, 9.699999999751574e-08, 0.0009764999999999982, 9.700000000445463e-08, 0.0009766390000000014, 9.699999999057685e-08, 0.0009765000000000051, 9.700000000445463e-08, 0.0009764869999999981, 9.700000000445463e-08, 0.0009765549999999901, 9.800000000392828e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.049
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.053
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.372
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018038903, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018039, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.383
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018038903, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018039, 'source': 'DUT_IC', 'event': 'RISING...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.434
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.0009572080000000011, 9.800000000045883e-08, 0.0009763749999999981, 9.700000000098519e-08, 0.0009765829999999996, 9.700000000098519e-08, 0.000976583999999999, 9.70...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.443
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.447
INFO
VALUE: [0, 9.700000000098519e-08, 0.0009572080000000011, 9.800000000045883e-08, 0.0009763749999999981, 9.700000000098519e-08, 0.0009765829999999996, 9.700000000098519e-08, 0.000976583999999999, 9.700000000098519e-08, 0.0009765139999999978, 9.700000000098519e-08, 0.0009765829999999996, 9.800000000045883e-08, 0.0009765410000000009, 9.700000000098519e-08, 0.0009764999999999982, 9.800000000045883e-08, 0.0009765969999999992, 9.700000000098519e-08, 0.0009765699999999995, 9.700000000098519e-08, 0.0009765550000000005, 9.799999999698938e-08, 0.0009764300000000004, 9.700000000098519e-08, 0.0009765699999999995, 9.700000000098519e-08, 0.0009765829999999996, 9.799999999698938e-08, 0.0009765000000000051, 9.699999999751574e-08, 0.0009765690000000035, 9.699999999751574e-08, 0.0009766250000000018, 9.799999999698938e-08, 0.0009764579999999995, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.0009765420000000039, 9.699999999751574e-08, 0.0009765840000000026, 8.299999999794583e-08, 0.0009765689999999966, 9.800000000392828e-08, 0.0009764999999999982, 9.699999999751574e-08, 0.000976653000000001, 9.700000000445463e-08, 0.0009764439999999999, 9.699999999751574e-08, 0.0009765420000000039, 9.699999999751574e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009765419999999969, 9.699999999751574e-08, 0.000976653000000001, 9.700000000445463e-08, 0.0009764999999999982, 9.699999999751574e-08, 0.000976458999999999, 9.700000000445463e-08, 0.0009767219999999993, 9.699999999751574e-08, 0.0009764030000000007, 9.700000000445463e-08, 0.0009766669999999936, 9.700000000445463e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009764449999999994, 9.699999999751574e-08, 0.000976583000000003, 9.699999999751574e-08, 0.000976458999999999, 9.700000000445463e-08, 0.0009766939999999932, 9.800000000392828e-08, 0.0009765269999999979, 9.800000000392828e-08, 0.0009764999999999982, 9.699999999751574e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009764579999999995, 9.800000000392828e-08, 0.0009767079999999997, 9.699999999751574e-08, 0.000976361000000002, 9.699999999751574e-08, 0.000976598000000009, 9.699999999057685e-08, 0.0009765000000000051, 9.700000000445463e-08, 0.0009766109999999883, 9.700000000445463e-08, 0.0009765000000000051, 9.799999999005049e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.572
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.576
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.897
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018471958, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018472056, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.907
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018471958, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018472056, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.961
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.800000000045883e-08, 0.0009604019999999991, 9.800000000045883e-08, 0.0009764160000000008, 9.699999999751574e-08, 0.000976473000000002, 9.700000000098519e-08, 0.0009766249999999983, 9.70...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.970
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:39.974
INFO
VALUE: [0, 9.800000000045883e-08, 0.0009604019999999991, 9.800000000045883e-08, 0.0009764160000000008, 9.699999999751574e-08, 0.000976473000000002, 9.700000000098519e-08, 0.0009766249999999983, 9.700000000098519e-08, 0.0009766949999999996, 9.700000000098519e-08, 0.0009763469999999989, 9.700000000098519e-08, 0.000976583999999999, 9.700000000098519e-08, 0.0009765969999999992, 9.700000000098519e-08, 0.0009765279999999973, 9.700000000098519e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764170000000003, 9.700000000098519e-08, 0.000976556, 9.700000000098519e-08, 0.0009766249999999983, 9.700000000098519e-08, 0.0009764999999999982, 9.700000000445463e-08, 0.0009766119999999948, 9.700000000445463e-08, 0.0009764719999999991, 8.299999999794583e-08, 0.0009765980000000021, 9.699999999751574e-08, 0.0009764030000000007, 9.699999999751574e-08, 0.000976583000000003, 9.699999999751574e-08, 0.0009765420000000039, 9.699999999751574e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.000976472000000006, 9.799999999698938e-08, 0.000976583000000003, 9.699999999751574e-08, 0.0009764999999999982, 9.700000000445463e-08, 0.0009765839999999956, 9.700000000445463e-08, 0.0009764719999999991, 9.699999999751574e-08, 0.0009765840000000026, 9.699999999751574e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.0009765689999999966, 9.800000000392828e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.0009766940000000002, 9.700000000445463e-08, 0.0009763619999999945, 9.700000000445463e-08, 0.0009766109999999953, 8.300000000488472e-08, 0.0009766249999999949, 9.700000000445463e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009765419999999969, 9.699999999751574e-08, 0.0009764590000000059, 9.699999999751574e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009764719999999991, 9.800000000392828e-08, 0.0009765969999999957, 9.700000000445463e-08, 0.0009765419999999969, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009766940000000002, 9.799999999698938e-08, 0.0009764439999999999, 9.700000000445463e-08, 0.0009764999999999982, 9.700000000445463e-08, 0.000976652999999994, 9.700000000445463e-08, 0.0009765559999999895, 9.700000000445463e-08, 0.0009764859999999986, 9.800000000392828e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.100
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.104
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.426
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018648931, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018649028, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.437
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018648931, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018649028, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.489
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.0009667639999999984, 9.700000000098519e-08, 0.0009764719999999991, 9.700000000098519e-08, 0.0009764309999999998, 9.699999999751574e-08, 0.0009766390000000014, 9.7...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.498
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.502
INFO
VALUE: [0, 9.700000000098519e-08, 0.0009667639999999984, 9.700000000098519e-08, 0.0009764719999999991, 9.700000000098519e-08, 0.0009764309999999998, 9.699999999751574e-08, 0.0009766390000000014, 9.700000000098519e-08, 0.0009765699999999995, 9.700000000098519e-08, 0.0009765550000000005, 9.799999999698938e-08, 0.0009764439999999999, 9.700000000098519e-08, 0.000976653000000001, 9.700000000098519e-08, 0.0009764029999999972, 9.700000000098519e-08, 0.0009765979999999987, 9.700000000098519e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765000000000017, 9.700000000098519e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009764449999999994, 9.699999999751574e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.0009764309999999998, 9.699999999751574e-08, 0.000976653000000001, 9.700000000445463e-08, 0.0009765419999999969, 9.699999999751574e-08, 0.0009765000000000051, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009765139999999978, 8.300000000488472e-08, 0.0009764729999999985, 9.699999999751574e-08, 0.000976653000000001, 9.699999999751574e-08, 0.0009764579999999995, 9.700000000445463e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009765839999999956, 9.700000000445463e-08, 0.0009765419999999969, 9.699999999751574e-08, 0.0009766390000000014, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.0009765140000000047, 9.699999999751574e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009764170000000003, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009765969999999957, 9.800000000392828e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009764579999999995, 9.799999999698938e-08, 0.000976555000000004, 9.699999999751574e-08, 0.0009764859999999986, 9.800000000392828e-08, 0.0009766520000000015, 9.799999999698938e-08, 0.000976554999999997, 9.700000000445463e-08, 0.0009764869999999981, 9.700000000445463e-08, 0.0009766110000000022, 9.699999999057685e-08, 0.0009765970000000096, 9.799999999005049e-08, 0.0009764160000000077, 9.699999999057685e-08, 0.0009766250000000087, 9.799999999005049e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.626
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.630
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.950
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018018375, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018018472, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:40.960
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018018375, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018018472, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.013
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.0009661670000000004, 8.299999999794583e-08, 0.0009765970000000027, 9.799999999698938e-08, 0.0009764020000000012, 9.800000000045883e-08, 0.0009765969999999992, 9.7...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.022
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.026
INFO
VALUE: [0, 9.700000000098519e-08, 0.0009661670000000004, 8.299999999794583e-08, 0.0009765970000000027, 9.799999999698938e-08, 0.0009764020000000012, 9.800000000045883e-08, 0.0009765969999999992, 9.700000000098519e-08, 0.0009765280000000008, 9.699999999751574e-08, 0.000976653000000001, 9.700000000098519e-08, 0.0009765139999999978, 9.700000000098519e-08, 0.0009764860000000021, 9.799999999698938e-08, 0.000976638000000002, 9.800000000045883e-08, 0.0009764859999999986, 9.700000000098519e-08, 0.0009764439999999999, 9.800000000045883e-08, 0.0009765829999999996, 9.700000000098519e-08, 0.000976583999999999, 9.700000000098519e-08, 0.0009765969999999992, 9.699999999751574e-08, 0.0009764719999999991, 9.800000000392828e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764999999999982, 9.700000000445463e-08, 0.0009765559999999965, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009765140000000047, 9.699999999751574e-08, 0.0009765689999999966, 9.800000000392828e-08, 0.0009765129999999983, 9.799999999698938e-08, 0.0009765270000000048, 9.799999999698938e-08, 0.000976666000000001, 9.800000000392828e-08, 0.0009764159999999938, 9.700000000445463e-08, 0.0009766390000000014, 9.799999999698938e-08, 0.0009765129999999983, 9.800000000392828e-08, 0.0009765829999999961, 9.700000000445463e-08, 0.0009765279999999973, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009765689999999966, 9.800000000392828e-08, 0.0009766109999999953, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.0009764439999999999, 9.800000000392828e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009765419999999969, 9.699999999751574e-08, 0.0009765000000000051, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.0009763330000000028, 9.699999999751574e-08, 0.0009767779999999976, 9.700000000445463e-08, 0.0009764869999999981, 9.699999999751574e-08, 0.0009765409999999974, 9.800000000392828e-08, 0.0009765969999999957, 9.700000000445463e-08, 0.0009764859999999986, 9.700000000445463e-08, 0.0009765419999999969, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.150
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.154
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.475
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018104681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018104778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.485
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018104681, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018104778, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.538
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.699999999751574e-08, 0.0009490140000000015, 9.700000000098519e-08, 0.0009764300000000004, 9.799999999698938e-08, 0.0009765270000000013, 9.800000000045883e-08, 0.0009766390000000014, 0.0...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.547
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.551
INFO
VALUE: [0, 9.699999999751574e-08, 0.0009490140000000015, 9.700000000098519e-08, 0.0009764300000000004, 9.799999999698938e-08, 0.0009765270000000013, 9.800000000045883e-08, 0.0009766390000000014, 0.0, 0.0009766799999999971, 9.700000000098519e-08, 0.0009763059999999997, 9.700000000098519e-08, 0.000976653000000001, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009765140000000012, 9.700000000098519e-08, 0.0009766109999999988, 9.700000000098519e-08, 0.0009765139999999978, 9.700000000098519e-08, 0.0009764449999999994, 9.700000000098519e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009765420000000004, 9.699999999751574e-08, 0.0009764860000000056, 9.699999999751574e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.000976681, 9.699999999751574e-08, 0.0009764719999999991, 9.800000000392828e-08, 0.000976665999999994, 9.800000000392828e-08, 0.0009763750000000015, 9.699999999751574e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.0009765689999999966, 8.399999999741947e-08, 0.000976583000000003, 9.699999999751574e-08, 0.0009765420000000039, 9.699999999751574e-08, 0.000976458999999999, 9.700000000445463e-08, 0.0009765689999999966, 9.700000000445463e-08, 0.0009765559999999965, 9.699999999751574e-08, 0.0009766670000000005, 9.700000000445463e-08, 0.0009765279999999973, 9.699999999751574e-08, 0.000976472000000006, 9.799999999698938e-08, 0.000976554999999997, 9.700000000445463e-08, 0.0009765839999999956, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.000976472000000006, 9.699999999751574e-08, 0.000976681, 9.699999999751574e-08, 0.0009764859999999986, 9.800000000392828e-08, 0.0009765689999999966, 9.700000000445463e-08, 0.0009766390000000014, 0.0, 0.0009765279999999973, 9.699999999751574e-08, 0.0009765140000000047, 9.699999999751574e-08, 0.0009764859999999986, 9.800000000392828e-08, 0.0009766800000000006, 0.0, 0.0009766249999999949, 9.700000000445463e-08, 0.0009765139999999908, 9.700000000445463e-08, 0.0009764869999999981, 9.700000000445463e-08, 0.000976652999999994, 9.700000000445463e-08, 0.000976472000000006, 9.699999999057685e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.681
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:41.685
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.006
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018444667, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018444764, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.017
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018444667, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018444764, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.070
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.699999999751574e-08, 0.0009619860000000015, 9.700000000098519e-08, 0.0009765139999999978, 9.700000000098519e-08, 0.000976681, 9.700000000098519e-08, 0.0009764170000000003, 9.69999999975...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.079
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.083
INFO
VALUE: [0, 9.699999999751574e-08, 0.0009619860000000015, 9.700000000098519e-08, 0.0009765139999999978, 9.700000000098519e-08, 0.000976681, 9.700000000098519e-08, 0.0009764170000000003, 9.699999999751574e-08, 0.0009767219999999993, 9.700000000098519e-08, 0.0009764449999999994, 9.700000000098519e-08, 0.0009764579999999995, 9.800000000045883e-08, 0.0009766109999999988, 9.700000000098519e-08, 0.0009766670000000005, 9.700000000098519e-08, 0.0009764170000000003, 9.699999999751574e-08, 0.000976569, 9.700000000098519e-08, 0.000976473000000002, 9.699999999751574e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765970000000027, 9.799999999698938e-08, 0.0009764719999999991, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999751574e-08, 0.0009765970000000027, 9.799999999698938e-08, 0.0009766250000000018, 9.700000000445463e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.0009765560000000034, 0.0, 0.0009765409999999974, 9.799999999698938e-08, 0.0009766520000000015, 9.800000000392828e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.0009764170000000003, 9.699999999751574e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009766110000000022, 9.800000000392828e-08, 0.0009764999999999982, 9.699999999751574e-08, 0.0009765410000000044, 9.799999999698938e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009764309999999998, 9.699999999751574e-08, 0.0009768050000000042, 0.0, 0.0009764309999999998, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009766249999999949, 9.700000000445463e-08, 0.0009764999999999982, 9.800000000392828e-08, 0.0009765269999999979, 9.799999999698938e-08, 0.000976555000000004, 9.699999999751574e-08, 0.000976570000000003, 9.699999999751574e-08, 0.0009764719999999991, 9.699999999751574e-08, 0.0009766120000000017, 9.700000000445463e-08, 0.0009765279999999973, 9.699999999751574e-08, 0.0009766110000000022, 8.299999999794583e-08, 0.0009764859999999986, 9.800000000392828e-08, 0.0009765409999999974, 9.700000000445463e-08, 0.000976652999999994, 9.700000000445463e-08, 0.0009764309999999998, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.208
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.212
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.532
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018143139, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018143236, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.542
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018143139, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018143236, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.595
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.700000000098519e-08, 0.0009559999999999985, 9.700000000098519e-08, 0.0009765420000000004, 9.700000000098519e-08, 0.0009765279999999973, 9.700000000098519e-08, 0.0009765969999999992, 9.8...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.604
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.608
INFO
VALUE: [0, 9.700000000098519e-08, 0.0009559999999999985, 9.700000000098519e-08, 0.0009765420000000004, 9.700000000098519e-08, 0.0009765279999999973, 9.700000000098519e-08, 0.0009765969999999992, 9.800000000045883e-08, 0.0009764579999999995, 9.700000000098519e-08, 0.0009765000000000017, 9.699999999751574e-08, 0.000976653000000001, 9.700000000098519e-08, 0.0009765979999999987, 9.700000000098519e-08, 0.0009765829999999996, 9.700000000098519e-08, 0.0009763749999999981, 9.800000000045883e-08, 0.0009766250000000018, 9.699999999751574e-08, 0.0009765140000000012, 8.300000000141528e-08, 0.000976681, 9.699999999751574e-08, 0.0009764860000000021, 9.699999999751574e-08, 0.0009765840000000026, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009765689999999966, 9.700000000445463e-08, 0.0009764869999999981, 9.699999999751574e-08, 0.000976583000000003, 9.699999999751574e-08, 0.0009765000000000051, 9.799999999698938e-08, 0.0009764859999999986, 9.700000000445463e-08, 0.000976652999999994, 9.700000000445463e-08, 0.0009764579999999995, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009765980000000021, 9.699999999751574e-08, 0.000976653000000001, 9.699999999751574e-08, 0.0009764439999999999, 9.800000000392828e-08, 0.0009765969999999957, 9.700000000445463e-08, 0.0009764439999999999, 9.799999999698938e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764030000000007, 9.700000000445463e-08, 0.0009767779999999976, 9.699999999751574e-08, 0.0009763750000000015, 9.699999999751574e-08, 0.0009765690000000035, 9.799999999698938e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009763890000000011, 9.700000000445463e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.0009764999999999982, 9.800000000392828e-08, 0.0009764859999999986, 9.699999999751574e-08, 0.000976583000000003, 9.699999999751574e-08, 0.0009765840000000026, 9.699999999751574e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.0009766249999999949, 9.700000000445463e-08, 0.000976458999999999, 9.699999999751574e-08, 0.0009765139999999978, 9.700000000445463e-08, 0.000976583000000003, 9.799999999005049e-08, 0.000976472000000006, 9.700000000445463e-08, 0.000976583000000003, 9.799999999005049e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.733
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:42.736
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:43.056
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018163083, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018163181, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:43.066
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.018163083, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.018163181, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:43.118
INFO
${GPIO_OVERHEAD} = {'diff': [0, 9.800000000045883e-08, 0.0009724299999999998, 9.700000000098519e-08, 0.0009765279999999973, 9.700000000098519e-08, 0.0009764170000000003, 9.700000000098519e-08, 0.0009766670000000005, 9.6...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:43.127
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:43.131
INFO
VALUE: [0, 9.800000000045883e-08, 0.0009724299999999998, 9.700000000098519e-08, 0.0009765279999999973, 9.700000000098519e-08, 0.0009764170000000003, 9.700000000098519e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009764170000000003, 9.700000000098519e-08, 0.000976681, 9.700000000098519e-08, 0.0009764719999999991, 9.800000000045883e-08, 0.0009764859999999986, 9.700000000098519e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009765140000000012, 9.700000000098519e-08, 0.0009764859999999986, 9.700000000098519e-08, 0.0009765979999999987, 9.700000000098519e-08, 0.0009764720000000025, 9.699999999751574e-08, 0.0009766670000000005, 9.699999999751574e-08, 0.0009764309999999998, 9.700000000445463e-08, 0.0009766389999999944, 9.700000000445463e-08, 0.000976569999999996, 9.700000000445463e-08, 0.0009764030000000007, 9.699999999751574e-08, 0.0009767079999999997, 9.699999999751574e-08, 0.0009765280000000043, 9.699999999751574e-08, 0.0009764999999999982, 9.800000000392828e-08, 0.0009765689999999966, 9.700000000445463e-08, 0.000976569999999996, 9.700000000445463e-08, 0.0009765419999999969, 9.699999999751574e-08, 0.0009766390000000014, 9.700000000445463e-08, 0.0009763189999999963, 9.799999999698938e-08, 0.0009765690000000035, 9.699999999751574e-08, 0.0009767359999999989, 9.800000000392828e-08, 0.0009763880000000016, 9.799999999698938e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009764030000000007, 9.699999999751574e-08, 0.000976681, 9.700000000445463e-08, 0.000976653000000001, 9.699999999751574e-08, 0.0009764160000000008, 8.399999999741947e-08, 0.0009766110000000022, 9.699999999751574e-08, 0.0009764579999999995, 9.800000000392828e-08, 0.0009766390000000014, 9.699999999751574e-08, 0.0009764160000000008, 9.799999999698938e-08, 0.0009767079999999997, 9.700000000445463e-08, 0.0009764719999999991, 9.799999999698938e-08, 0.000976555000000004, 9.699999999751574e-08, 0.0009765279999999973, 9.700000000445463e-08, 0.0009765419999999969, 9.700000000445463e-08, 0.000976569999999996, 8.299999999794583e-08, 0.0009765140000000047, 9.700000000445463e-08, 0.0009765139999999978, 9.699999999057685e-08, 0.000976681000000007, 9.700000000445463e-08, 0.0009765559999999895, 9.700000000445463e-08]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:43.256
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:43.260
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}