Summary


Boardhifive1b
Testsuitetests_periph_uart
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:2200:01:34.129
100%

Log


Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:24
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests
Documentation: Verify basic functionality of the periph UART API.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/01__periph_uart_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Resets the device
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:22
00:22:56.645
INFO
Starting process: make reset
00:22:56.656
INFO
Waiting for process to complete.
00:22:57.695
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:22 / 28.10.2021 - 00:23
00:23:00.700
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:00.737
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write short string to UART and verify echo reply.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:01.099
INFO
Starting process: make reset
00:23:01.110
INFO
Waiting for process to complete.
00:23:02.182
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.186
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.222
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.615
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.618
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.905
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.909
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.967
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:05.970
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.078
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.026
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:23:06.027
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.044
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:06.045
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:06.045
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:06.045
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.080
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Write long string to UART and verify echo reply.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:06.119
INFO
Starting process: make reset
00:23:06.130
INFO
Waiting for process to complete.
00:23:07.197
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.203
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.237
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.571
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.574
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.874
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.878
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.954
INFO
${RESULT} = {'cmd': 'uart_write 1 t384029960027882936229309187127056571881027', 'data': ['t384029960027882936229309187127056571881027'], 'msg': '> UART_DEV(1) RX: [t384029960027882936229309187127056571881027]\\n'...
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:10.958
INFO
${RESULT} = {'cmd': 'uart_write 1 t384029960027882936229309187127056571881027', 'data': ['t384029960027882936229309187127056571881027'], 'msg': '> UART_DEV(1) RX: [t384029960027882936229309187127056571881027]\\n'...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:11.091
INFO
${stats} = RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:11.028
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 56, 'result': 'Success'}
00:23:11.028
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 56, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:11.048
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:11.049
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:11.049
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:11.050
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:11.094
INFO
RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify echo of short string to UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:11.133
INFO
Starting process: make reset
00:23:11.144
INFO
Waiting for process to complete.
00:23:12.190
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.194
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.232
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.614
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.617
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.912
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.916
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.974
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['u222'], 'msg': '> UART_DEV(1) RX: [u222]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:15.978
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['u222'], 'msg': '> UART_DEV(1) RX: [u222]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:16.085
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:16.032
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:23:16.033
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:16.050
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:16.050
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:16.051
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:16.051
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:16.088
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify echo of long string to UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:16.126
INFO
Starting process: make reset
00:23:16.137
INFO
Waiting for process to complete.
00:23:17.189
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.194
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.228
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.570
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.573
INFO
[{'cmd': ['write_reg(uart.mode.if_type,1,0)', ['write_bits(416,2,2,1)', 'rr 416 1', 'wr 416 5']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 4']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.860
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.865
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.943
INFO
${RESULT} = {'cmd': 'uart_write 1 t384029960027882936229309187127056571881027', 'data': ['u49513::71138993:4733:41:298238167682992138'], 'msg': '> UART_DEV(1) RX: [u49513::71138993:4733:41:298238167682992138]\\n'...
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:20.947
INFO
${RESULT} = {'cmd': 'uart_write 1 t384029960027882936229309187127056571881027', 'data': ['u49513::71138993:4733:41:298238167682992138'], 'msg': '> UART_DEV(1) RX: [u49513::71138993:4733:41:298238167682992138]\\n'...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:21.079
INFO
${stats} = RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:21.003
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 56, 'result': 'Success'}
00:23:21.004
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 56, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:21.024
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:21.024
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:21.025
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:21.025
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:21.083
INFO
RX: 56, TX: 56, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify access of user register via UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:21.126
INFO
Starting process: make reset
00:23:21.137
INFO
Waiting for process to complete.
00:23:22.180
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.185
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.224
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.570
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.573
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.863
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.866
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.934
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr 0 10"', 'data': ['{"data":[0,1,2,3,4,5,6,7,8,9'], 'msg': '> UART_DEV(1) RX: [{"data":[0,1,2,3,4,5,6,7,8,9], "result":0}]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.938
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr 0 10"', 'data': ['{"data":[0,1,2,3,4,5,6,7,8,9'], 'msg': '> UART_DEV(1) RX: [{"data":[0,1,2,3,4,5,6,7,8,9], "result":0}]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:26.061
INFO
${stats} = RX: 20, TX: 73, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:25.991
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 20, 'result': 'Success'}
00:23:25.992
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 73, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:26.012
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:26.012
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:26.013
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:26.014
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:26.064
INFO
RX: 20, TX: 73, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verfiy access of invalid register via UART fails.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:26.107
INFO
Starting process: make reset
00:23:26.118
INFO
Waiting for process to complete.
00:23:27.146
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.151
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.191
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.536
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Succes...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.541
INFO
[{'cmd': ['write_reg(uart.mode.if_type,2,0)', ['write_bits(416,2,2,2)', 'rr 416 1', 'wr 416 9']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,115200,0)', 'wr 422 0 194 1 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 8']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.833
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.836
INFO
${RESULT} = {'cmd': 'uart_init 1 115200', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 115200', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.900
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr -1 10"', 'data': ['{"result":22}'], 'msg': '> UART_DEV(1) RX: [{"result":22}]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.904
INFO
${RESULT} = {'cmd': 'uart_write 1 "rr -1 10"', 'data': ['{"result":22}'], 'msg': '> UART_DEV(1) RX: [{"result":22}]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:31.038
INFO
${stats} = RX: 21, TX: 44, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.967
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 21, 'result': 'Success'}
00:23:30.968
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 44, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:30.991
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:30.991
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:30.992
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:30.993
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:31.040
INFO
RX: 21, TX: 44, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write with baudrate 9600.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:31.080
INFO
Starting process: make reset
00:23:31.091
INFO
Waiting for process to complete.
00:23:32.108
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.112
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.153
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.499
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.503
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.807
INFO
${RESULT} = {'cmd': 'uart_init 1 9600', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 9600', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.811
INFO
${RESULT} = {'cmd': 'uart_init 1 9600', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 9600', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.895
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.900
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:36.033
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.980
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:23:35.980
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:35.998
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:35.998
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:35.999
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:35.999
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:36.036
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write with baudrate 38400.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:36.074
INFO
Starting process: make reset
00:23:36.086
INFO
Waiting for process to complete.
00:23:37.109
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.114
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.149
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.523
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 422 0 150 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.526
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,38400,0)', 'wr 422 0 150 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.821
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.825
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should succeed
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.891
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.895
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': ['t111'], 'msg': '> UART_DEV(1) RX: [t111]\\n', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ${data} is not in the last API Result
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``pattern`` is not found in ``list``.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:41.008
INFO
${stats} = RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.953
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 17, 'result': 'Success'}
00:23:40.954
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 17, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:40.972
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:40.972
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:40.972
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:40.973
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:41.011
INFO
RX: 17, TX: 17, PE: 0, FE: 0, NF: 0, ORE: 0
Documentation: Verify UART write fails when baudrates do not match.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:41.095
INFO
Starting process: make reset
00:23:41.106
INFO
Waiting for process to complete.
00:23:42.184
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:45.189
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:45.221
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup uart parameters on PHiLIP
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Setup tester's UART.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:45.514
INFO
${RESULT} = [{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success...
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:45.517
INFO
[{'cmd': ['write_reg(uart.mode.if_type,0,0)', ['write_bits(416,2,2,0)', 'rr 416 1', 'wr 416 1']], 'result': 'Success'}, {'cmd': ['write_reg(uart.baud,9600,0)', 'wr 422 128 37 0 0'], 'result': 'Success'}, {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 0']], 'result': 'Success'}, {'cmd': 'ex', 'result': 'Success'}]
Documentation: Init UART device and flush buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:47.816
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Init UART device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:47.823
INFO
${RESULT} = {'cmd': 'uart_init 1 38400', 'data': None, 'msg': 'Initialized UART_DEV(1) at BAUD 38400', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Remove garbage from UART buffer
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write string to RF_UART_DEV should timeout
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the given API ``call`` does not timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:51.942
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': None, 'result': 'Timeout'}
Documentation: Write data to UART device.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:51.950
INFO
${RESULT} = {'cmd': 'uart_write 1 t111', 'data': None, 'result': 'Timeout'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Write PHiLIP statistics to log and print on console
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Return PHiLIP RX/TX counters and error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:52.078
INFO
${stats} = RX: 0, TX: 0, PE: 0, FE: 1, NF: 0, ORE: 0
Documentation: Get rx/tx counters.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:52.006
INFO
${rx} = {'cmd': ['read_reg(uart.rx_count,0,2)', 'rr 427 2'], 'data': 0, 'result': 'Success'}
00:23:52.007
INFO
${tx} = {'cmd': ['read_reg(uart.tx_count,0,2)', 'rr 429 2'], 'data': 0, 'result': 'Success'}
Documentation: Get error flags.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:52.028
INFO
${pe} = {'cmd': ['read_reg(uart.status.pe,0,1)', ['read_bits(431,1,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:52.029
INFO
${fe} = {'cmd': ['read_reg(uart.status.fe,0,1)', ['read_bits(431,2,1)', 'rr 431 1']], 'data': 1, 'result': 'Success'}
00:23:52.030
INFO
${nf} = {'cmd': ['read_reg(uart.status.nf,0,1)', ['read_bits(431,3,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
00:23:52.030
INFO
${ore} = {'cmd': ['read_reg(uart.status.ore,0,1)', ['read_bits(431,4,1)', 'rr 431 1']], 'data': 0, 'result': 'Success'}
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:52.081
INFO
RX: 0, TX: 0, PE: 0, FE: 1, NF: 0, ORE: 0
Documentation: Verify mode config functionality of the periph UART API.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:24
Source: /opt/jenkins/workspace/nightly/tests/periph_uart/tests/02__periph_uart_mode.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:52.390
INFO
Starting process: make reset
00:23:52.401
INFO
Waiting for process to complete.
00:23:53.453
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:56.458
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:56.498
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Verify UART mode with 8 data bits and even parity.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Resets the device
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:23
00:23:56.875
INFO
Starting process: make reset
00:23:56.886
INFO
Waiting for process to complete.
00:23:57.953
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:23 / 28.10.2021 - 00:24
00:24:00.959
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
00:24:01.000
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
Documentation: Verify DUT supports UART mode configuration
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
Documentation: Runs the given keyword with the given arguments and ignores possible error.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
00:24:03.418
INFO
${status} = FAIL
00:24:03.419
INFO
${value} = Uart Mode expected Success but received Timeout
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
00:24:03.352
INFO
${RESULT} = {'cmd': 'uart_mode 1 8 N 1', 'data': None, 'result': 'Timeout'}
Documentation: Setup databits, parity and stopbits.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:24 / 28.10.2021 - 00:24
00:24:03.360
INFO
${RESULT} = {'cmd': 'uart_mode 1 8 N 1', 'data': None, 'result': 'Timeout'}