Summary


Boardhifive1b
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:3100:01:42.557
100%

Log


Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:33
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Resets the device
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:40.507
INFO
Starting process: make reset
00:31:40.518
INFO
Waiting for process to complete.
00:31:41.575
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:44.580
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:44.617
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Resets the device
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:44.797
INFO
Starting process: make reset
00:31:44.808
INFO
Waiting for process to complete.
00:31:45.880
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:48.885
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:48.920
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.052
INFO
${RESULT} = {'cmd': 'gpio_set 0 21', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.056
INFO
${RESULT} = {'cmd': 'gpio_set 0 21', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.177
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.197
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.201
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.246
INFO
${RESULT} = {'cmd': 'gpio_clear 0 21', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.250
INFO
${RESULT} = {'cmd': 'gpio_clear 0 21', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.370
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.388
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.392
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Resets the device
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:49.459
INFO
Starting process: make reset
00:31:49.470
INFO
Waiting for process to complete.
00:31:50.570
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.575
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.610
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.758
INFO
${RESULT} = {'cmd': 'gpio_set 0 20', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.762
INFO
${RESULT} = {'cmd': 'gpio_set 0 20', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.882
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.900
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.904
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.951
INFO
${RESULT} = {'cmd': 'gpio_clear 0 20', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:53.955
INFO
${RESULT} = {'cmd': 'gpio_clear 0 20', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:54.075
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:54.094
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:54.097
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Resets the device
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:54.162
INFO
Starting process: make reset
00:31:54.173
INFO
Waiting for process to complete.
00:31:55.253
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.259
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.291
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.437
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.440
INFO
${RESULT} = {'cmd': 'gpio_set 0 19', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.559
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.578
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.581
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.625
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.629
INFO
${RESULT} = {'cmd': 'gpio_clear 0 19', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.748
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.768
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
00:31:58.771
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Verify if board to philip wiring is correct.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:33
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:32
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Resets the device
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:31
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:32
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:31 / 28.10.2021 - 00:32
00:31:59.127
INFO
Starting process: make reset
00:31:59.138
INFO
Waiting for process to complete.
00:32:00.179
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:03.184
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:03.213
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Resets the device
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:03.349
INFO
Starting process: make reset
00:32:03.360
INFO
Waiting for process to complete.
00:32:04.412
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:07.416
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:07.446
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:07.567
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Resets the device
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:07.622
INFO
Starting process: make reset
00:32:07.633
INFO
Waiting for process to complete.
00:32:08.684
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:11.689
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:11.723
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:11.849
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Resets the device
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:11.906
INFO
Starting process: make reset
00:32:11.917
INFO
Waiting for process to complete.
00:32:12.972
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:15.977
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.010
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.155
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.159
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.195
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.199
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.230
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.234
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.271
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.275
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.311
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.315
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.346
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.350
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.386
INFO
${RESULT} = {'cmd': 'gpio_set 0 18', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.390
INFO
${RESULT} = {'cmd': 'gpio_set 0 18', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.510
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.527
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.531
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.575
INFO
${RESULT} = {'cmd': 'gpio_clear 0 18', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.579
INFO
${RESULT} = {'cmd': 'gpio_clear 0 18', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.698
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.716
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.720
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Resets the device
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:16.783
INFO
Starting process: make reset
00:32:16.797
INFO
Waiting for process to complete.
00:32:17.899
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:20.903
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:20.939
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.080
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.084
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.120
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.124
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.156
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.159
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.196
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.200
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.236
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.239
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.270
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.274
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.307
INFO
${RESULT} = {'cmd': 'gpio_set 0 23', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.311
INFO
${RESULT} = {'cmd': 'gpio_set 0 23', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.431
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.449
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.452
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.497
INFO
${RESULT} = {'cmd': 'gpio_clear 0 23', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.501
INFO
${RESULT} = {'cmd': 'gpio_clear 0 23', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.620
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.638
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.642
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Fails if the given objects are unequal.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Resets the device
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:21.705
INFO
Starting process: make reset
00:32:21.716
INFO
Waiting for process to complete.
00:32:22.771
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:25.776
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
00:32:25.808
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 28.10.2021 - 00:32 / 28.10.2021 - 00:32