Summary


Boardfrdm-k22f
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2021.10-devel-737-g92fc4ace65
HIL Tests Version
cff0e3ca87
Date / Time
21.09.202100:2000:00:41.262
100%

Log


Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:03.230
INFO
Starting process: make reset
00:20:03.250
INFO
Waiting for process to complete.
00:20:05.257
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:05.265
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:05.295
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:05.486
INFO
Starting process: make reset
00:20:05.506
INFO
Waiting for process to complete.
00:20:06.766
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:06.773
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:06.801
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:06.882
INFO
${RESULT} = {'cmd': 'gpio_set 2 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:06.885
INFO
${RESULT} = {'cmd': 'gpio_set 2 5', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.003
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.019
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.022
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.062
INFO
${RESULT} = {'cmd': 'gpio_clear 2 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.065
INFO
${RESULT} = {'cmd': 'gpio_clear 2 5', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.184
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.206
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.212
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:07.279
INFO
Starting process: make reset
00:20:07.289
INFO
Waiting for process to complete.
00:20:08.510
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.515
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.534
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.625
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.628
INFO
${RESULT} = {'cmd': 'gpio_set 2 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.745
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.761
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.764
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.804
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.807
INFO
${RESULT} = {'cmd': 'gpio_clear 2 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.924
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.940
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:08.944
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:09.003
INFO
Starting process: make reset
00:20:09.014
INFO
Waiting for process to complete.
00:20:10.219
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.223
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.237
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.323
INFO
${RESULT} = {'cmd': 'gpio_set 2 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.326
INFO
${RESULT} = {'cmd': 'gpio_set 2 10', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.443
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.459
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.462
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.502
INFO
${RESULT} = {'cmd': 'gpio_clear 2 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.506
INFO
${RESULT} = {'cmd': 'gpio_clear 2 10', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.623
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.639
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.643
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify if board to philip wiring is correct.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:10.963
INFO
Starting process: make reset
00:20:10.974
INFO
Waiting for process to complete.
00:20:12.146
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:12.150
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:12.163
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:12.273
INFO
Starting process: make reset
00:20:12.283
INFO
Waiting for process to complete.
00:20:13.477
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:13.480
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:13.495
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:13.563
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:13.615
INFO
Starting process: make reset
00:20:13.625
INFO
Waiting for process to complete.
00:20:14.799
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:14.803
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:14.818
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:14.904
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:14.963
INFO
Starting process: make reset
00:20:14.974
INFO
Waiting for process to complete.
00:20:16.105
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.109
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.124
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.211
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.214
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.248
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.252
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.280
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.283
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.319
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.322
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.357
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.362
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.403
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.408
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.454
INFO
${RESULT} = {'cmd': 'gpio_set 3 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.457
INFO
${RESULT} = {'cmd': 'gpio_set 3 7', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.574
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.591
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.594
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.634
INFO
${RESULT} = {'cmd': 'gpio_clear 3 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.637
INFO
${RESULT} = {'cmd': 'gpio_clear 3 7', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.755
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.771
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.775
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:16.833
INFO
Starting process: make reset
00:20:16.844
INFO
Waiting for process to complete.
00:20:18.032
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.037
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.059
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.150
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.153
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.186
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.189
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.218
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.221
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.255
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.258
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.290
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.294
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.321
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.325
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.355
INFO
${RESULT} = {'cmd': 'gpio_set 3 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.359
INFO
${RESULT} = {'cmd': 'gpio_set 3 6', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.476
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.492
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.495
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.536
INFO
${RESULT} = {'cmd': 'gpio_clear 3 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.539
INFO
${RESULT} = {'cmd': 'gpio_clear 3 6', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.656
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes the given keyword with the given arguments.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.672
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.676
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Fails if the given objects are unequal.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Executes all the given keywords in a sequence.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the PHiLIP MCU
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Resets the device
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Reset the test application
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Runs a process and waits for it to complete.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:18.734
INFO
Starting process: make reset
00:20:18.744
INFO
Waiting for process to complete.
00:20:19.892
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:19.896
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
00:20:19.910
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 21.09.2021 - 00:20 / 21.09.2021 - 00:20