Summary


Boardesp8266-esp-12x
Testsuitetests_xtimer_benchmarks
Status
PASS
RIOT Version
2022.01-devel-276-ga92cdb535e
HIL Tests Version
c4fffdfe4e
Date / Time
28.10.202100:1700:03:48.705
100%

Log


Start / End: 28.10.2021 - 00:17 / 28.10.2021 - 00:21
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests
Start / End: 28.10.2021 - 00:17 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/00__timer_version.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:17 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:17 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:17 / 28.10.2021 - 00:18
00:17:59.338
INFO
Starting process: make reset
00:17:59.348
INFO
Waiting for process to complete.
00:18:00.770
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:03.783
INFO
Slept 3 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.025
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Record the timer version
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.161
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.255
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Get the version of timer used
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.258
INFO
${RESULT} = {'cmd': 'get_timer_version', 'msg': ['get_timer_version\r\n'], 'data': ['xtimer'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.280
INFO
NAME: timer-version
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.283
INFO
VALUE: xtimer
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/xtimer_benchmarks/tests/01__timer_overhead.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the test application
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs a process and waits for it to complete.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:04.355
INFO
Starting process: make reset
00:18:04.365
INFO
Waiting for process to complete.
00:18:05.778
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:08.785
INFO
Slept 3 seconds
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.087
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes all the given keywords in a sequence.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.206
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the specified keyword multiple times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.278
INFO
Repeating keyword, round 1/20.
00:18:09.794
INFO
Repeating keyword, round 2/20.
00:18:10.303
INFO
Repeating keyword, round 3/20.
00:18:10.811
INFO
Repeating keyword, round 4/20.
00:18:11.318
INFO
Repeating keyword, round 5/20.
00:18:11.849
INFO
Repeating keyword, round 6/20.
00:18:12.356
INFO
Repeating keyword, round 7/20.
00:18:12.865
INFO
Repeating keyword, round 8/20.
00:18:13.373
INFO
Repeating keyword, round 9/20.
00:18:13.880
INFO
Repeating keyword, round 10/20.
00:18:14.404
INFO
Repeating keyword, round 11/20.
00:18:14.909
INFO
Repeating keyword, round 12/20.
00:18:15.415
INFO
Repeating keyword, round 13/20.
00:18:15.925
INFO
Repeating keyword, round 14/20.
00:18:16.431
INFO
Repeating keyword, round 15/20.
00:18:16.937
INFO
Repeating keyword, round 16/20.
00:18:17.450
INFO
Repeating keyword, round 17/20.
00:18:17.959
INFO
Repeating keyword, round 18/20.
00:18:18.467
INFO
Repeating keyword, round 19/20.
00:18:18.975
INFO
Repeating keyword, round 20/20.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.373
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.377
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.697
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015627444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01562825, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.705
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015627444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.01562825, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.751
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.760
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.763
INFO
VALUE: [0, 8.059999999990297e-07, 0.0010455969999999988, 8.060000000024992e-07, 0.001032847, 8.059999999990297e-07, 0.0010328330000000004, 8.049999999995561e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.060000000024992e-07, 0.001032847, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010338469999999975, 8.060000000059686e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328339999999964, 8.05000000006495e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 8.060000000059686e-07, 0.0010328469999999895, 7.919999999994598e-07, 0.0010338470000000044, 8.060000000059686e-07, 0.0010328469999999895, 7.909999999999862e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.888
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:09.892
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.207
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015550861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015551653, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.216
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015550861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015551653, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.261
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.268
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.271
INFO
VALUE: [0, 7.920000000011945e-07, 0.001037194, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.920000000029292e-07, 0.001032847, 8.049999999995561e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001033847000000001, 7.919999999994598e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 8.050000000030255e-07, 0.0010328339999999998, 8.049999999995561e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.001032832999999997, 8.060000000059686e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328330000000038, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999895, 8.060000000059686e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999920908e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.398
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.401
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.716
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015570861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015571667, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.724
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015570861, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015571667, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.768
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.776
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.779
INFO
VALUE: [0, 8.060000000007644e-07, 0.0010371799999999987, 8.059999999990297e-07, 0.001032847, 7.920000000029292e-07, 0.001032847, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 7.909999999999862e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.050000000030255e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.001033832999999998, 8.059999999990297e-07, 0.0010328469999999965, 8.05000000006495e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328330000000038, 8.059999999990297e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010338469999999975, 8.060000000059686e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999905, 8.060000000059686e-07, 0.0010328470000000034, 7.919999999994598e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.905
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:10.909
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.223
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015545292, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015546083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.231
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015545292, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015546083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.275
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.283
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.286
INFO
VALUE: [0, 7.909999999999862e-07, 0.0010371949999999994, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 7.909999999999862e-07, 0.001032847, 8.060000000024992e-07, 0.0010338469999999975, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.920000000063987e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010338480000000039, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.001032832999999997, 8.060000000059686e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.920000000063987e-07, 0.0010328469999999965, 8.05000000006495e-07, 0.001032847999999989, 7.909999999999862e-07, 0.0010338480000000039, 8.05000000006495e-07, 0.0010328469999999895, 8.060000000059686e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.413
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.418
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.753
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.01561625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015617056, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.762
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.01561625, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015617056, 'source': 'DUT_IC', 'event': 'RISI...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.806
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.814
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.817
INFO
VALUE: [0, 8.060000000007644e-07, 0.0010371799999999987, 8.059999999990297e-07, 0.001032847, 7.920000000029292e-07, 0.001032847, 8.049999999995561e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.0010338469999999975, 8.050000000030255e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 8.059999999990297e-07, 0.001033847000000001, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.909999999999862e-07, 0.0010328479999999994, 8.050000000030255e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.001033832999999998, 8.059999999990297e-07, 0.0010328469999999965, 8.05000000006495e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.001033832999999998, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.060000000059686e-07, 0.0010338469999999905, 7.919999999994598e-07, 0.0010328470000000034, 8.05000000006495e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.943
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:11.947
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.261
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015513889, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015514681, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.270
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015513889, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015514681, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.314
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.321
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.325
INFO
VALUE: [0, 7.920000000011945e-07, 0.001038194000000001, 7.919999999994598e-07, 0.0010338469999999975, 8.050000000030255e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001033847000000001, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 8.049999999995561e-07, 0.0010328339999999998, 8.049999999995561e-07, 0.001032847, 8.059999999990297e-07, 0.001033847000000001, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001033847000000001, 7.919999999994598e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.920000000063987e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328340000000033, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.920000000063987e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.920000000063987e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999920908e-07, 0.0010328470000000034, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999926172e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.451
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.454
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.769
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015696569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015697375, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.777
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015696569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015697375, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.822
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.830
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.833
INFO
VALUE: [0, 8.059999999990297e-07, 0.0010371810000000016, 8.049999999995561e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.0010338469999999975, 7.909999999999862e-07, 0.0010328479999999994, 8.050000000030255e-07, 0.0010338469999999975, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 8.060000000059686e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338469999999975, 8.060000000059686e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328330000000038, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338470000000044, 8.049999999995561e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010338470000000044, 8.059999999920908e-07, 0.0010328470000000034, 8.060000000059686e-07, 0.0010338469999999905, 7.919999999994598e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.960
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:12.963
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.278
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015958278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015959083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.286
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015958278, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015959083, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.330
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.338
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.341
INFO
VALUE: [0, 8.049999999995561e-07, 0.0010371810000000016, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.920000000029292e-07, 0.0010338469999999975, 8.060000000024992e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 7.909999999999862e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.001033847999999997, 8.05000000006495e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338469999999975, 8.060000000059686e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999895, 8.05000000006495e-07, 0.0010328480000000029, 8.049999999926172e-07, 0.0010328470000000034, 7.919999999994598e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.468
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.471
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.787
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015622569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015623361, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.795
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015622569, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015623361, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.838
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.845
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.849
INFO
VALUE: [0, 7.920000000011945e-07, 0.0010371949999999994, 7.909999999999862e-07, 0.001032847, 8.059999999990297e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.0010338469999999975, 8.060000000024992e-07, 0.001032847, 7.909999999999862e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.920000000063987e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010338480000000039, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.920000000063987e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999926172e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328470000000034, 8.060000000059686e-07, 0.0010328469999999895, 8.060000000059686e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.974
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:13.979
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.306
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015125444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015126236, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.315
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015125444, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015126236, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.358
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.366
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.369
INFO
VALUE: [0, 7.919999999994598e-07, 0.0010371949999999994, 7.909999999999862e-07, 0.001032847, 8.060000000024992e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.001033847000000001, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338470000000044, 8.049999999995561e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010338469999999975, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328469999999965, 8.05000000006495e-07, 0.0010328480000000029, 8.049999999926172e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999920908e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.498
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.502
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.815
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015189556, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015190347, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.824
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015189556, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015190347, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.867
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.875
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:14.878
INFO
VALUE: [0, 7.909999999999862e-07, 0.0010381949999999987, 7.909999999999862e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 7.920000000029292e-07, 0.0010338469999999975, 8.060000000024992e-07, 0.001032847, 8.059999999990297e-07, 0.0010328330000000004, 8.049999999995561e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 7.909999999999862e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.001032861000000003, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.060000000059686e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.060000000059686e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338330000000048, 8.049999999995561e-07, 0.001032847999999996, 8.049999999995561e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328469999999965, 8.05000000006495e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328470000000034, 8.059999999920908e-07, 0.0010328470000000034, 7.919999999994598e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.004
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.007
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.320
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015387194, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015387986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.329
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015387194, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015387986, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.373
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.380
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.384
INFO
VALUE: [0, 7.919999999994598e-07, 0.0010371950000000012, 7.909999999999862e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.049999999995561e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.0010328340000000033, 8.049999999995561e-07, 0.001032847, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.0010328470000000034, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.001033847999999997, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 8.05000000006495e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328469999999965, 7.920000000063987e-07, 0.0010328469999999965, 8.05000000006495e-07, 0.00103384799999999, 8.05000000006495e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999905, 8.060000000059686e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.509
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.512
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.827
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015191083, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015191889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Reads event trace from the dut
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.835
INFO
${RESULT} = {'cmd': 'read_trace()', 'result': 'Success', 'data': [{'time': 0.015191083, 'source': 'DUT_IC', 'event': 'RISING', 'diff': 0, 'source_diff': 0}, {'time': 0.015191889, 'source': 'DUT_IC', 'event': 'RIS...
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Only use with data containing dicts as follows:
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.879
INFO
${GPIO_OVERHEAD} = {'source': ['DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC', 'DUT_IC'...
Documentation: Adds the given property in output
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.891
INFO
NAME: overhead-00-gpio
Documentation: Logs the given message with the given level.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:15.894
INFO
VALUE: [0, 8.060000000007644e-07, 0.0010371799999999987, 8.060000000024992e-07, 0.0010338469999999975, 8.060000000024992e-07, 0.0010328330000000004, 8.059999999990297e-07, 0.001032847, 8.049999999995561e-07, 0.0010328479999999994, 7.909999999999862e-07, 0.0010328479999999994, 8.049999999995561e-07, 0.001032847, 7.920000000029292e-07, 0.001032847, 8.059999999990297e-07, 0.001033847000000001, 7.919999999994598e-07, 0.001032847, 8.049999999995561e-07, 0.0010338480000000004, 8.049999999995561e-07, 0.001032847, 7.919999999994598e-07, 0.001033847000000001, 8.059999999990297e-07, 0.001032847, 7.919999999994598e-07, 0.001032847, 8.060000000024992e-07, 0.001032847, 8.049999999995561e-07, 0.001032847999999996, 7.909999999999862e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010338469999999975, 8.049999999995561e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328469999999965, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.001033847999999997, 8.049999999995561e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010338469999999975, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999995561e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010328470000000034, 8.059999999990297e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328469999999965, 8.049999999995561e-07, 0.0010338480000000039, 7.909999999999862e-07, 0.0010328469999999965, 8.059999999990297e-07, 0.0010338470000000044, 8.059999999990297e-07, 0.001032832999999997, 8.059999999990297e-07, 0.0010328470000000034, 8.049999999995561e-07, 0.0010328480000000029, 7.909999999999862e-07, 0.0010328480000000029, 8.049999999926172e-07, 0.0010328470000000034, 7.919999999994598e-07, 0.0010328470000000034, 8.059999999920908e-07, 0.0010338470000000044, 8.059999999920908e-07]
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Runs the given keyword with the given arguments, if ``condition`` is true.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Resets the device
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Writes the register and the init for the struct and executes changes
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Executes the given keyword with the given arguments.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.019
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}
Documentation: Run the GPIO toggling overhead benchmark
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 28.10.2021 - 00:18 / 28.10.2021 - 00:18
00:18:16.022
INFO
${RESULT} = {'cmd': 'gpio overhead', 'msg': ['overhead_gpio\r\n'], 'result': 'Success'}