Summary


Boardesp32-wroom-32
Testsuitetests_periph_spi
Status
FAIL
RIOT Version
2021.10-devel-746-g3090657b79
HIL Tests Version
cff0e3ca87
Date / Time
22.09.202100:1700:00:14.522
0%

Log


Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/periph_spi/tests
Documentation: Verify basic functionality of the periph SPI API.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Source: /opt/jenkins/workspace/nightly/tests/periph_spi/tests/01__periph_spi_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Reset the PHiLIP MCU
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Resets the device
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Reset the test application
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Runs a process and waits for it to complete.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:46.668
INFO
Starting process: make reset
00:17:46.681
INFO
Waiting for process to complete.
00:17:47.707
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:47.711
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:47.727
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Verify SPI acquire and release API calls.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Verify acquiring an SPI bus after release.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Verify that acquiring a locked SPI bus blocks.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Verify functionality of transfering bytes and regs of the periph SPI API.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Source: /opt/jenkins/workspace/nightly/tests/periph_spi/tests/02__periph_spi_transfer.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Reset the PHiLIP MCU
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Resets the device
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Reset the test application
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Runs a process and waits for it to complete.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:50.191
INFO
Starting process: make reset
00:17:50.201
INFO
Waiting for process to complete.
00:17:51.204
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:51.208
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:51.223
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Sends a single byte two times using the spi_transfer_byte function. Once with the continue parameter and once without.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Sends 1, 2 and 16 bytes using the spi_transfer_bytes function. Uses multiple settings of the function parameters: cont is set and not set out has 1, 16 and none values
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Send a byte to a given register and reads it back using the spi_transfer_reg function
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Sends 1, 2 and 16 bytes strarting from a given register using the spi_transfer_regs function
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Verify functionality of all 4 modes of the periph SPI API.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Source: /opt/jenkins/workspace/nightly/tests/periph_spi/tests/03__periph_spi_modes.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Reset the PHiLIP MCU
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Resets the device
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Reset the test application
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Runs a process and waits for it to complete.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:53.668
INFO
Starting process: make reset
00:17:53.679
INFO
Waiting for process to complete.
00:17:54.669
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:54.673
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:54.688
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Transfers Bytes in SPI mode 0 (cpol=0 and cpha=0)
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Transfers Bytes in SPI mode 1 (cpol=0 and cpha=1)
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Transfers Bytes in SPI mode 2 (cpol=1 and cpha=0)
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Transfers Bytes in SPI mode 3 (cpol=1 and cpha=1)
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Verify that the meassured times are within a certain window
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:18
Source: /opt/jenkins/workspace/nightly/tests/periph_spi/tests/04__periph_spi_timer.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:18
Documentation: Reset the PHiLIP MCU
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Resets the device
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Reset the test application
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
Documentation: Runs a process and waits for it to complete.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:57.130
INFO
Starting process: make reset
00:17:57.140
INFO
Waiting for process to complete.
00:17:58.128
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:58.132
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:18
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:18
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.09.2021 - 00:17 / 22.09.2021 - 00:17
00:17:58.147
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 100kHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 100kHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 400kHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 400kHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 1MHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 1MHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 5MHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 5MHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 10MHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18
Documentation: Checks the clock speed for 10MHz
Start / End: 22.09.2021 - 00:18 / 22.09.2021 - 00:18