Summary


Boardesp32-wroom-32
Testsuitetests_periph_gpio
Status
PASS
RIOT Version
2022.07-devel-506-gdc7bc9f854
HIL Tests Version
8fe8d2d38b
Date / Time
22.05.202200:2300:01:20.554
100%

Log


Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:25
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:24
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:23
Documentation: Resets the device
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:23
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:23
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:23
00:23:58.245
INFO
Starting process: make reset
00:23:58.263
INFO
Waiting for process to complete.
00:23:59.325
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:23
00:23:59.329
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:23 / 22.05.2022 - 00:23
00:23:59.342
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:01.568
INFO
Starting process: make reset
00:24:01.583
INFO
Waiting for process to complete.
00:24:02.605
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:02.609
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:02.624
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:04.874
INFO
${RESULT} = {'cmd': 'gpio_set 0 32', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:04.877
INFO
${RESULT} = {'cmd': 'gpio_set 0 32', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:04.994
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.010
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.013
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.057
INFO
${RESULT} = {'cmd': 'gpio_clear 0 32', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.060
INFO
${RESULT} = {'cmd': 'gpio_clear 0 32', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.176
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.192
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.196
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:05.253
INFO
Starting process: make reset
00:24:05.270
INFO
Waiting for process to complete.
00:24:06.328
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:06.332
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:06.349
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.574
INFO
${RESULT} = {'cmd': 'gpio_set 0 13', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.577
INFO
${RESULT} = {'cmd': 'gpio_set 0 13', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.694
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.711
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.715
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.758
INFO
${RESULT} = {'cmd': 'gpio_clear 0 13', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.762
INFO
${RESULT} = {'cmd': 'gpio_clear 0 13', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.879
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.894
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.898
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:08.955
INFO
Starting process: make reset
00:24:08.972
INFO
Waiting for process to complete.
00:24:10.012
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:10.017
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:10.040
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.224
INFO
${RESULT} = {'cmd': 'gpio_set 0 33', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.228
INFO
${RESULT} = {'cmd': 'gpio_set 0 33', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.345
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.372
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.378
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.447
INFO
${RESULT} = {'cmd': 'gpio_clear 0 33', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.452
INFO
${RESULT} = {'cmd': 'gpio_clear 0 33', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.579
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.595
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.599
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:25
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:12.937
INFO
Starting process: make reset
00:24:12.953
INFO
Waiting for process to complete.
00:24:13.991
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:13.996
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:14.014
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:16.270
INFO
Starting process: make reset
00:24:16.286
INFO
Waiting for process to complete.
00:24:17.347
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:17.351
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:17.367
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:19.539
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:19.590
INFO
Starting process: make reset
00:24:19.606
INFO
Waiting for process to complete.
00:24:20.621
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:20.625
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:20.640
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:22.854
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:22.905
INFO
Starting process: make reset
00:24:22.919
INFO
Waiting for process to complete.
00:24:23.935
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:23.938
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:23.953
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.194
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.197
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.229
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.233
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.260
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.263
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.297
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.300
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.334
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.337
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.365
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.369
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.403
INFO
${RESULT} = {'cmd': 'gpio_set 0 17', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.406
INFO
${RESULT} = {'cmd': 'gpio_set 0 17', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.523
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.541
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.545
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.591
INFO
${RESULT} = {'cmd': 'gpio_clear 0 17', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.594
INFO
${RESULT} = {'cmd': 'gpio_clear 0 17', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.712
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.734
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.738
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:26.798
INFO
Starting process: make reset
00:24:26.809
INFO
Waiting for process to complete.
00:24:27.833
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:27.837
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:27.851
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.099
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.102
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.134
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.138
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.165
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.168
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.201
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.204
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.236
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.239
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.267
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.270
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.304
INFO
${RESULT} = {'cmd': 'gpio_set 0 16', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.307
INFO
${RESULT} = {'cmd': 'gpio_set 0 16', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.423
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.439
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.443
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.487
INFO
${RESULT} = {'cmd': 'gpio_clear 0 16', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.490
INFO
${RESULT} = {'cmd': 'gpio_clear 0 16', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.606
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.622
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.626
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Fails if the given objects are unequal.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the PHiLIP MCU
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Resets the device
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Reset the test application
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Runs a process and waits for it to complete.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:30.684
INFO
Starting process: make reset
00:24:30.699
INFO
Waiting for process to complete.
00:24:31.727
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:31.731
INFO
Slept 0 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24
00:24:31.745
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.05.2022 - 00:24 / 22.05.2022 - 00:24