Summary


Boardarduino-mega2560
Testsuitetests_periph_gpio
Status
FAIL
RIOT Version
2022.04-devel-92-g2520b5c608
HIL Tests Version
8fe8d2d38b
Date / Time
22.01.202223:3000:01:50.894
92%

Log


Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:31
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/01__periph_gpio_base.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:07.777
INFO
Starting process: make reset
23:30:07.787
INFO
Waiting for process to complete.
23:30:08.749
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:11.755
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:11.787
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:14.958
INFO
Starting process: make reset
23:30:14.968
INFO
Waiting for process to complete.
23:30:15.943
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:18.947
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:18.977
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.188
INFO
${RESULT} = {'cmd': 'gpio_set 7 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.192
INFO
${RESULT} = {'cmd': 'gpio_set 7 4', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.309
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.325
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.328
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.407
INFO
${RESULT} = {'cmd': 'gpio_clear 7 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.411
INFO
${RESULT} = {'cmd': 'gpio_clear 7 4', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.527
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.543
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.546
INFO
${RESULT} = {'cmd': ['read_reg(gpio[0].status.level,0,1)', ['read_bits(542,0,1)', 'rr 542 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:19.603
INFO
Starting process: make reset
23:30:19.613
INFO
Waiting for process to complete.
23:30:20.638
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:23.642
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:23.672
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:23.860
INFO
${RESULT} = {'cmd': 'gpio_set 7 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:23.864
INFO
${RESULT} = {'cmd': 'gpio_set 7 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:23.980
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:23.996
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:23.999
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:24.077
INFO
${RESULT} = {'cmd': 'gpio_clear 7 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:24.080
INFO
${RESULT} = {'cmd': 'gpio_clear 7 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:24.197
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:24.213
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:24.216
INFO
${RESULT} = {'cmd': ['read_reg(gpio[1].status.level,0,1)', ['read_bits(546,0,1)', 'rr 546 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:24.277
INFO
Starting process: make reset
23:30:24.287
INFO
Waiting for process to complete.
23:30:25.299
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.305
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.338
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify DUT pin is connected to PHiLIP pin with toggle.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.537
INFO
${RESULT} = {'cmd': 'gpio_set 4 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.541
INFO
${RESULT} = {'cmd': 'gpio_set 4 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.658
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.674
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.677
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.754
INFO
${RESULT} = {'cmd': 'gpio_clear 4 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.757
INFO
${RESULT} = {'cmd': 'gpio_clear 4 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.874
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.891
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:28.894
INFO
${RESULT} = {'cmd': ['read_reg(gpio[2].status.level,0,1)', ['read_bits(550,0,1)', 'rr 550 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify if board to philip wiring is correct.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:31
Source: /opt/jenkins/workspace/nightly/tests/periph_gpio/tests/02__periph_gpio_others.robot
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:29.238
INFO
Starting process: make reset
23:30:29.248
INFO
Waiting for process to complete.
23:30:30.210
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:33.214
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:33.239
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:36.475
INFO
Starting process: make reset
23:30:36.484
INFO
Waiting for process to complete.
23:30:37.455
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:40.459
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:40.491
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:40.653
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:40.717
INFO
Starting process: make reset
23:30:40.727
INFO
Waiting for process to complete.
23:30:41.697
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:44.701
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:44.747
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:44.911
SKIP
This pin is not supported for this board
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:44.979
INFO
Starting process: make reset
23:30:44.989
INFO
Waiting for process to complete.
23:30:45.962
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:48.966
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:48.995
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.179
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.184
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.226
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.230
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.257
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.260
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.293
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.296
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_rx.pull,1,0)', ['write_bits(418,2,2,1)', 'rr 418 1', 'wr 418 36']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.329
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.332
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.359
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.362
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.425
INFO
${RESULT} = {'cmd': 'gpio_set 3 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.428
INFO
${RESULT} = {'cmd': 'gpio_set 3 3', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.545
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.561
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.564
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.643
INFO
${RESULT} = {'cmd': 'gpio_clear 3 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.646
INFO
${RESULT} = {'cmd': 'gpio_clear 3 3', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.762
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.779
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.782
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_rx.level,0,1)', ['read_bits(418,5,1)', 'rr 418 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:49.839
INFO
Starting process: make reset
23:30:49.849
INFO
Waiting for process to complete.
23:30:50.899
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:53.905
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:53.939
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Verify Periph Pin connected to PHiLIP with toggle.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Skips the rest of the current test if the ``condition`` is True.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.101
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.104
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.disable,1,0)', ['write_bits(416,1,1,1)', 'rr 416 1', 'wr 416 3']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.137
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.142
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.170
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.174
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.207
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.210
INFO
${RESULT} = {'cmd': ['write_reg(uart.dut_tx.pull,1,0)', ['write_bits(419,2,2,1)', 'rr 419 1', 'wr 419 4']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.243
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Writes a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.246
INFO
${RESULT} = {'cmd': ['write_reg(uart.mode.init,0,0)', ['write_bits(416,0,1,0)', 'rr 416 1', 'wr 416 2']], 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.273
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Executes or commits device configuration changes
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.276
INFO
${RESULT} = {'cmd': 'ex', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.341
INFO
${RESULT} = {'cmd': 'gpio_set 3 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Set the GPIO port and pin to HIGH.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.344
INFO
${RESULT} = {'cmd': 'gpio_set 3 2', 'data': None, 'msg': 'Pin set', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.460
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.477
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.480
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 1, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.558
INFO
${RESULT} = {'cmd': 'gpio_clear 3 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Clear the GPIO port and pin to LOW.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.561
INFO
${RESULT} = {'cmd': 'gpio_clear 3 2', 'data': None, 'msg': 'Pin cleared', 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.678
INFO
Slept 100 milliseconds
Documentation: Fails if the given API ``call`` does not succeed.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the result of the given ``call`` does not match the expected outcome.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes the given keyword with the given arguments.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.699
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Read a register defined by the memory map
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the scope of the current suite.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.703
INFO
${RESULT} = {'cmd': ['read_reg(uart.dut_tx.level,0,1)', ['read_bits(419,5,1)', 'rr 419 1']], 'data': 0, 'result': 'Success'}
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Fails if the given objects are unequal.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Executes all the given keywords in a sequence.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the PHiLIP MCU
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Resets the device
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Reset the test application
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Runs a process and waits for it to complete.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:54.774
INFO
Starting process: make reset
23:30:54.785
INFO
Waiting for process to complete.
23:30:55.752
INFO
Process completed.
Documentation: Pauses the test executed for the given time.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:58.756
INFO
Slept 3 seconds
Documentation: Verify that the DUT runs the required API test firmware
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Repeats the given API ``call`` up to 5 times on timeout.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
Documentation: Makes a variable available everywhere within the local scope.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30
23:30:58.784
INFO
${i} = 0
Documentation: Fails if ``container`` does not contain ``item`` one or more times.
Start / End: 22.01.2022 - 23:30 / 22.01.2022 - 23:30